Conventional pressure swing adsorption (PSA) processes can only produce one high purity product in a single stage, whereas the state-of-art dual-reflux PSA (DR-PSA) can produce two high purity products simultaneously. However, multicomponent gas separation is often required in the industry, targeting at recovering several valued products at the same time. In this study, we propose a novel adsorption process, namely triple-reflux PSA (TR-PSA), to separate three components simultaneously. A middle product outlet and a middle reflux stream were introduced to the adsorption columns of a conventional DR-PSA process to separate ternary mixtures of nitrogen, methane, and helium. Nonisothermal dynamic models were built to investigate the impacts of operating parameters particularly the location of the middle reflux/product stream and the middle reflux flow rates. Results showed that the TR-PSA process successfully separated ternary mixtures obtaining three enriched products simultaneously in a single stage, yielding a separation performance comparable to that of the double-stage DR-PSA with significantly lower capital and energy cost. 相似文献
Inspired by the incorporation of metallocene functionalities into a variety of bioactive structures, particularly antimicrobial peptides, we endeavored to broaden the structural variety of quaternary ammonium compounds (QACs) by the incorporation of the ferrocene moiety. Accordingly, 23 ferrocene-containing mono- and bisQACs were prepared in high yields and tested for activity against a variety of bacteria, including Gram-negative strains and a panel of clinically isolated MRSA strains. Ferrocene QACs were shown to be effective antiseptics with some displaying single-digit micromolar activity against all bacteria tested, demonstrating yet another step in the expansion of structural variety of antiseptic QACs. 相似文献
The purpose of this study was to explore the value of extraction of tumor features in contrast-enhanced ultrasonography (CEUS) images based on the deep belief networks (DBN) for the diagnosis of cervical cancer patients and realize the intelligent evaluation on effects of diagnosis and chemotherapy of the cervical cancer. An automatic extraction algorithm with the time-intensity curve (TIC) was proposed based on Sparse nonnegative matrix factorization (SNMF) in this study, and was applied to the framework of automatic analysis of cervical cancer tumors based on the deep belief networks, to assist doctors in the analysis of cervical cancer tumors. The framework was applied to the real clinical diagnostic data, and the feasibility of the method was verified by comparing the accuracy, sensitivity, and specificity. Later, the parameters of patients’ time to peak (TP), peak intensity (PI), mean transit time (MTT), and area under the curve (AUC) were obtained by drawing TICs, and the changes of p53 protein and ki-67 protein obtained by pathological section staining were analyzed to evaluate the therapeutic effect in the patients. It was found that the proposed model of tumor feature extraction based on the DBN had the higher accuracy (86.36%), sensitivity (83.33%), and specificity (87.50%). The related parameters of TIC curve obtained based on SNMF showed that there was a significant difference in p53 content between tissues with different degrees of disease (p?<?0.05), the PI of poorly differentiated tissues was significantly higher than that of those with high to medium differentiation (p?<?0.05). In addition, PI and AUC of patients after chemotherapy were significantly lower than that before chemotherapy (p?<?0.05), while MTT was significantly higher than that before chemotherapy (p?<?0.05). Therefore, the proposed TIC feature extraction of CEUS images based on SNMF and the automatic tumor classification based on deep learning can be used in the diagnosis and efficacy evaluation of cervical cancer patients.
The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape. 相似文献
We used perceptual and oculomotor measures to understand the negative impacts of low (phantom array) and high (motion blur) duty cycles with a high‐speed, AR‐likehead‐mounted display prototype. We observed large intersubject variability for the detection of phantom array artifacts but a highly consistent and systematic effect on saccadic eye movement targeting during low duty cycle presentations. This adverse effect on saccade endpoints was also related to an increased error rate in a perceptual discrimination task, showing a direct effect of display duty cycle on the perceptual quality. For high duty cycles, the probability of detecting motion blur increased during head movements, and this effect was elevated at lower refresh rates. We did not find an impact of the temporal display characteristics on compensatory eye movements during head motion (e.g., VOR). Together, our results allow us to quantify the tradeoff of different negative spatiotemporal impacts of user movements and make subsequent recommendations for optimized temporal HMD parameters. 相似文献
First‐order phase transitions, where one phase replaces another by virtue of a simple crossing of free energies, are best known between solids, liquids, and vapors, but they also occur in a wide range of other contexts, including even elemental magnets. The key challenges are to establish whether a phase transition is indeed first order, and then to determine how the new phase emerges because this will determine thermodynamic and electronic properties. Here it is shown that both challenges are met for the spin reorientation transition in the topological metallic ferromagnet Fe3Sn2. The magnetometry and variable temperature magnetic force microscopy experiments reveal that, analogous to the liquid–gas transition in the temperature–pressure plane, this transition is centered on a first‐order line terminating in a critical end point in the field‐temperature plane. The nucleation and growth associated with the transition is directly imaged, indicating that the new phase emerges at the most convoluted magnetic domain walls for the high temperature phase and then moves to self‐organize at the domain centers of the high temperature phase. The dense domain patterns and phase coexistence imply a complex inhomogenous electronic structure, which can yield anomalous contributions to the electrical conductivity. 相似文献
This study offers new insights into two-lift deposition of mature fine tailings under atmospheric drying. The interaction of newly added lift and former lift(s) was evaluated using column experiments in terms of volumetric water content, electrical conductivity (EC), hydraulic conductivity, geochemistry and microstructure. Water content and EC followed the same trend and decreasing of water content appears to be responsible for significant reduction in EC. Evaporation on top of the column reduced the water content to almost zero. The obtained results support the coupling between the hydraulic and chemical processes that should be considered by active operators. 相似文献
Micelle formation by the anionic amino acid‐based surfactant undecyl l ‐phenylalaninate (und‐Phe) was investigated as a function of pH in solutions containing either Na+, l ‐arginine, l ‐lysine, or l ‐ornithine counterions. In each mixture, the surfactant's critical micelle concentration (CMC) was the lowest at low pH and increased as solutions became more basic. Below pH 9, surfactant solutions containing l ‐arginine and l ‐lysine had lower CMC than the corresponding solutions with Na+ counterions. Nuclear magnetic resonance (NMR) diffusometry and dynamic light scattering studies revealed that und‐Phe micelles with Na+ counterions had hydrodynamic radii of approximately 15 Å throughout the investigated pH range. Furthermore, l ‐arginine, l ‐lysine, and l ‐ornithine were found to bind most strongly to the micelles below pH 9 when the counterions were cationic. Above pH 9, the counterions became zwitterionic and dissociated from the micelle surface. In und‐Phe/l ‐arginine solution, counterion dissociation was accompanied by a decrease in the hydrodynamic radius of the micelle. However, in experiments with l ‐lysine and l ‐ornithine, micelle radii remained the same at low pH when counterions were bound and at high pH when they were not. This result suggested that l ‐arginine is attached perpendicular to the micelle surface through its guanidinium functional group with the remainder of the molecule extending into solution. Contrastingly, l ‐lysine and l ‐ornithine likely bind parallel to the micelle surface with their two amine functional groups interacting with different surfactant monomers. This model was consistent with the results from two‐dimensional ROESY (rotating frame Overhauser enhancement spectroscopy) NMR experiments. Two‐dimensional NMR also showed that in und‐Phe micelles, the aromatic rings on the phenylalanine headgroups were rotated toward the hydrocarbon core of micelle. 相似文献