Evaluation of toxic elements in baby foods commercially available in Pakistan

In present work, the concentrations of toxic elements, aluminium (Al), cadmium (Cd), nickel (Ni) and lead (Pb) were measured in different solid baby foods (BFs), primarily to evaluate whether the intakes comply within permissible levels of these toxic elements (TEs). The BFs were evaluated for total contents of TEs, using a simple and fast ultrasound-assisted extraction (UAE) method. The accuracy of the proposed UAE method was ensured by using certified reference materials and results obtained by conventional wet acid digestion method on same CRM, at 95% confidence level. The range of the investigated TEs in different BFs were 4770–35,200, 25.6–88.3, 124–332 and 52.5–90.6 μg/kg for Al, Cd, Ni and Pb, respectively. The results indicated that BFs including rice cereals have high level of all four TEs. The daily intakes of TEs for children through BFs have also been estimated, and are well below the recommended tolerable levels.     

Simultaneously determination of methyl and inorganic mercury in fish species by cold vapour generation atomic absorption spectrometry

A simple and rapid non-chromatographic method was developed to determine methylmercury (MeHg) and inorganic mercury (iHg) levels in muscles tissues of 10 freshwater fish species. The MeHg and iHg were determined by cold vapour atomic absorption spectrometry after alkaline wet digestion of samples. The digested samples were reduced sequentially with stannous chloride and sodium tetrahydroborate for iHg and MeHg, respectively. Parameters such as carrier gas flow rate (argon), volume of oxidizing and potassium persulphate solutions were investigated in detail. The accuracy of the technique was evaluated by using certified reference material (DORM-2) and spiking the both Hg species in muscles tissue of a fish. The limits of detection were 0.117 and 0.133 μg kg⁻¹ for MeHg and iHg, respectively. The concentrations of MeHg and iHg in muscles tissues of ten fish species were found in the range of (28.4–56.3) and (3.01–8.11) μg kg⁻¹, respectively.     

Comparison of electrothermal and hydride generation atomic absorption spectrometry for the determination of total arsenic in broiler chicken

The purpose of this study was to estimate total arsenic concentration in different tissues (leg, breast, liver and heart) of broiler chicken by hydride generation atomic absorption spectrometry (HGAAS) and graphite furnace atomic absorption spectrometry (GFAAS), prior to microwave assisted acid digestion. The accuracy of the techniques was evaluated by using certified reference material DORM-2. The percentage recoveries of total As were observed as 100.6% and 99.4% for HGAAS and GFAAS, respectively. The precision of the techniques, expressed as relative standard deviation, was observed as 1.71% and 4.18% for HGAAS and GFAAS measurements, respectively. The limits of detection for HGAAS and GFAAS were 0.025 μg/g and 0.052 μg/g, respectively. The concentrations of total arsenic in different tissues of broiler chicken were found in the range of 2.19–5.28, 2.15–5.22, 2.97–7.17 and 2.68–6.36 μg/g for leg, breast, liver and heart tissues, respectively. At a mean level of chicken consumption (60 g/person/day), people may ingest in the range of 72.0–85.1 μg arsenic/person/day from chicken alone.     

A monolithic CMOS microhotplate-based gas sensor system

A monolithic CMOS microhotplate-based conductance-type gas sensor system is described. A bulk micromachining technique is used to create suspended microhotplate structures that serve as sensing film platforms. The thermal properties of the microhotplates include a 1-ms thermal time constant and a 10/spl deg/C/mW thermal efficiency. The polysilicon used for the microhotplate heater exhibits a temperature coefficient of resistance of 1.067/spl times/10/sup -3///spl deg/C. Tin(IV) oxide and titanium(IV) oxide (SnO/sub 2/,TiO/sub 2/) sensing films are grown over postpatterned gold sensing electrodes on the microhotplate using low-pressure chemical vapor deposition (LPCVD). An array of microhotplate gas sensors with different sensing film properties is fabricated by using a different temperature for each microhotplate during the LPCVD film growth process. Interface circuits are designed and implemented monolithically with the array of microhotplate gas sensors. Bipolar transistors are found to be a good choice for the heater drivers, and MOSFET switches are suitable for addressing the sensing films. An on-chip operational amplifier improves the signal-to-noise ratio and produces a robust output signal. Isothermal responses demonstrate the ability of the sensors to detect different gas molecules over a wide range of concentrations including detection below 100 nanomoles/mole.     

Assessment of mitral regurgitation severity by Doppler color flow mapping of the vena contracta

BACKGROUND: Although Doppler color flow mapping is widely used to assess the severity of mitral regurgitation (MR), a simple, accurate, and quantitative marker of MR by color flow mapping remains elusive. We hypothesized that vena contracta width by color flow mapping would accurately predict the severity of MR. METHODS AND RESULTS: We studied 80 patients with MR. Vena contracta width was measured in multiple views with zoom mode and nonstandard angulation to optimize its visualization. Flow volumes across the left ventricular outflow tract and mitral annulus were calculated by pulsed-Doppler technique to determine regurgitant volume. Effective regurgitant orifice area was calculated by dividing the regurgitant volume by the continuous-wave Doppler velocity-time integral of the MR jet. The cause of MR was ischemia in 24, dilated cardiomyopathy in 34 mitral valve prolapse in 12, endocarditis in 2, rheumatic disease in 2, mitral annular calcification in 1, and uncertain in 5. Regurgitant volumes ranged from 2 to 191 mL. Regurgitant orifice area ranged from 0.01 to 1.47 cm2. Single-plane vena contracta width from the parasternal long-axis view correlated well with regurgitant volume (r = .85, SEE = 20 mL) and regurgitant orifice area (r = .86, SEE = 0.15 cm2). Biplane vena contracta width from apical views correlated well with regurgitant volume (r = .85, SEE = 19 mL) and regurgitant orifice area (r = .88, SEE = 0.14 cm2). A biplane vena contracta width > or = 0.5 cm was always associated with a regurgitant volume > 60 mL and a regurgitant orifice area > 0.4 cm2. A biplane vena contracta width < or = 0.3 cm predicted a regurgitant volume < 60 mL and a regurgitant orifice area < 0.4 cm2 in 24 of 29 patients. No other parameter, including jet area, left atrial size, pulmonary flow reversal, or semiquantitative MR grade, correlated significantly with regurgitant volume or regurgitant orifice area in a multivariate analysis. CONCLUSIONS: Our results demonstrate that careful color flow mapping of the vena contracta of the MR jet provides a simple quantitative assessment of MR that correlates well with quantitative Doppler techniques.     

Heavy metal accumulation in different varieties of wheat (Triticum aestivum L.) grown in soil amended with domestic sewage sludge

The concentrations of heavy metals (HMs) in plants served to indicate the metal contamination status of the site, and also revealed the abilities of various plant species to take up and accumulate them from the soil dressed with sewage sludge. A study to comprehend the mobility and transport of HMs from soil and soil amended with untreated sewage sludge to different newly breaded varieties of wheat (Anmol, TJ-83, Abadgar and Mehran-89) in Pakistan. A pot-culture experiment was conducted to study the transfer of HMs to wheat grains, grown in soil (control) and soil amended with sewage sludge (test samples). The total and ethylenediaminetetraaceticacid (EDTA)-extractable HMs in agricultural soil and soil amended with domestic sewage sludge (SDWS) and wheat grains were analysed by flame atomic absorption spectrometer/electrothermal atomic absorption spectrometer, prior to microwave-assisted wet acid digestion method. The edible part of wheat plants (grains) from test samples presented high concentration of all HMs understudy (mgkg(-1)). Significant correlations were found between metals in exchangeable fractions of soil and SDWS, with total metals in control and test samples of wheat grains. The bio-concentration factors of all HMs were high in grains of two wheat varieties, TJ-83 and Mehran-89, as compared to other varieties, Anmol and Abadgar grown in the same agricultural plots.     

Toxic metals distribution in different components of Pakistani and imported cigarettes by electrothermal atomic absorption spectrometer

It was extensively investigated that a significant flux of toxic metals, along with other toxins, reaches the lungs through smoking. In present study toxic metals (TMs) (Al, Cd, Ni and Pb) were determined in different components of Pakistani local branded and imported cigarettes, including filler tobacco (FT), filter (before and after normal smoking by a single volunteer) and ash by electrothermal atomic absorption spectrometer (ETAAS). Microwave-assisted digestion method was employed. The validity and accuracy of methodology were checked by using certified sample of Virginia tobacco leaves (ICHTJ-cta-VTL-2). The percentages (%) of TMs in different components of cigarette were calculated with respect to their total contents in FT of all branded cigarettes before smoking, while smoke concentration has been calculated by subtracting the filter and ash contents from the filler tobacco content of each branded cigarette. The highest percentage (%) of Al was observed in ash of all cigarettes, with range 97.3-99.0%, while in the case of Cd, a reverse behaviour was observed, as a range of 15.0-31.3% of total contents were left in the ash of all branded cigarettes understudy.     

Evaluation of an ultrasonic acid digestion procedure for total heavy metals determination in environmental and biological samples

In this study, a sample preparation method based on ultrasonic assisted acid digestion (UAD) has been evaluated for total heavy metals (Cd, Cr, Ni and Pb) determination in different environmental (soil, sediment and sewage sludge), and biological (fish muscles, vegetables and grains) samples, using electrothermal atomic absorption spectrometry (ETAAS). The investigated parameters influencing UAD such as presonication time, sonication time, temperature of ultrasonic bath, and different acid mixtures were fully optimized, whereas power was maintained constant at 100% of nominal power of ultrasonic bath. Six different sets of above parameters were applied on six certified reference materials (CRMs) having different matrices. The accuracy of the method was also tested by comparing the results with those obtained from conventional hot plate assisted acid digestion method on same CRMs. Analytical results for HMs by both methods showed no significant difference at 95% confidence limit (p<0.05). Recoveries of HMs ranging from 96.2% to 102% and 96.3% to 98.6% were obtained from biological and environmental samples, respectively. The average relative standard deviation of UAD method varied between 3.5% and 8.2%, depending on the analyte.     

Hazardous impact of toxic metals on tobacco leaves grown in contaminated soil by ultrasonic assisted pseudo-digestion: multivariate study

Tobacco leaves (Nicotiana tabacum L.), agricultural soil and pollute irrigated lake water samples were collected during 2005–2006 and analyzed for Cd and Ni by electrothermal atomic absorption spectrometry (ETAAS). A simple and efficient procedure was investigated for the complete decomposition of tobacco leaves using ultrasonic assisted acid pseudo-digestion method (UPDM). A Plackett–Burman experimental design was used as a multivariate strategy for the evaluation of seven factors/variables at once, while central composite were used to found optimum values of significant variables. The accuracy of the proposed methods was assessed by analyzing certified reference (CRM); Virginia tobacco leaves (CTA-VTL-2). The results being compared with those obtained by conventional wet acid digestion method. The result obtained by optimized method showed good agreement with the certified values and sufficiently high recovery 97.8 and 98.7% for Cd and Ni, respectively. Under optimal conditions, the detection limits (3σ) were evaluated to be 0.019 μg g⁻¹ for Cd and 0.37 μg g⁻¹ for Ni. The proposed method was successfully applied to the determination of Cd and Ni in raw, processed tobacco and different branded cigarettes samples.     

A multivariate study: variation in uptake of trace and toxic elements by various varieties of Sorghum bicolor L

The aim of present study was to evaluate the variation in uptake of elements (As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb and Zn) by different varieties of Sorghum bicolor L., plants grown in soil amended with untreated industrial waste water sewage sludge (SUIS), on same experimental plots. The power of chemometrics was also used in exploring the potential natural and/or anthropogenic sources responsible for elemental contents in different varieties of sorghum. Hierarchical cluster analysis was used to explore the different variety of sorghum grouping according to corresponding their SUIS samples as additional information to the output obtained by principal component analysis. Significant genotypic variation was detected in the fourteen elements concentrations in sorghum grains, indicating the possibility to reduce the concentration of toxic elements in grains through breeding approach. It was observed that high tolerance limit of toxic elements was observed in sorghum variety PARC-SV-1.