Transcutaneous measurement and spectrum analysis of heart wallvibrations

For the noninvasive diagnosis of heart disease based on the acoustic and elastic characteristics of the heart muscle, it is necessary to transcutaneously measure small vibration signals, including components with an amplitude of less than 100 μm, from various parts of the heart wall continuously for periods of more than several heartbeats in a wide frequency range up to 1 kHz. Such measurement, however, has not been realized by any ultrasonic diagnostic methods or systems to date. By introducing the constraint least-square approach, this paper proposes a new method for accurately tracking the movement of the heart wall based on both the phase and magnitude of the demodulated signal to determine the instantaneous position of the object so that the vibration velocity of the moving object can be accurately estimated. By this method, small vibrations of the heart wall with small amplitudes less than 100 μm on the motion resulting from a heartbeat with large amplitude of 10 mm can be successfully detected with sufficient reproducibility in the frequency range up to several hundred Hertz continuously for periods of about 10 heartbeats. The resultant small vibration is analyzed not only in the time domain, but also in the frequency domain. As confirmed by the preliminary experiments herein reported, the new method offers potential for research in acoustical diagnosis of heart disease     

Analysis of XANES for identification of highly dispersed transition metal oxides on supports

XANES of vanadium and niobium oxide on silica or alumina have been analyzed quantitatively by a deconvolution technique. Based on the results for reference compounds, local structures of supported vanadium and niobium species were identified. The composition was estimated from difference spectra for the samples which consisted of two kinds of species.     

The oxidation properties of fourth generation single-crystal nickel-based superalloys

The fourth-generation nickel-based single-crystal superalloys, which contain large amounts of refractory metals for strengthening and platinum group metals for topologically close-packed phase prevention, show excellent high-temperature strength. However, these alloying elements seem to decrease high-temperature oxidation resistance. In this study, nickel-based superalloys with various amounts of tantalum, rhenium, and ruthenium were examined in isothermal and cyclic exposures at 1,100°C to investigate the effect on the oxide growth rate and resistance to scale spallation. Ruthenium and rhenium were found to degrade the oxidation resistance by the vaporization of their oxide. Tantalum-rich oxide in the spinel layer acts to stabilize ruthenium and rhenium oxide in the scale. The addition of hafnium and yttrium is effective in improving the oxidation resistance of ruthenium-containing nickel-based superalloys.     

High-frequency ultrasonic cleaning tank utilizing oblique incidence

Transmission characteristics of a double-structured tank, used for high-frequency (1 MHz range) ultrasonic cleaning of semiconductor wafers and substrates, were improved by utilizing oblique incidence of ultrasonic waves. As the sound transmittivity through a plate in water varies with the angle of incidence, the bottom of the Pyrex glass inner container was slanted at the angle where strong transmission occurred. In the slant-bottom container, an intensive and uniform sound pressure distribution was measured with a polyvinylidene fluoride (PVDF) hydrophone probe. In comparison with the conventional horizontal-bottom container, it was shown that the distributions as well as amplitude of sound pressure were remarkably improved by slanting the bottom of the inner container at the proper angle     

Athletes as health testing examinees

AIMS AND BACKGROUND: The usefulness of monoclonal antibodies that recognize markers of neoplastic lesions in complementing conventional cytology was evaluated by the avidin-biotin-peroxidase complex, indirect immunoperoxidase technique. METHODS: In order to enhance the sensitivity of the traditional method, a pool of seven combined monoclonal antibodies (Pool C7), which reacts specifically with cells of epithelial origin and is able to distinguish between mesothelial and malignant cells, was tested on cytologic smears of 262 serous effusions. The effusions were benign or neoplastic, mainly from breast, ovary and lung cancers. RESULTS: Immunocytochemical method showed an 100% specificity and 100% of predictivity whereas the sensitivity was 98%, 96% and 95% for breast ovarian and lung carcinomas, respectively. CONCLUSIONS: The results demonstrated that the pool when used together with conventional methods, is useful in analysis of serous effusions in diagnostic investigations.     

Expression of recombinant human thyrotropin receptor in myeloma cells

Starting with a previously isolated cDNA for human thyrotropin receptor (TSHR), we established a transformed myeloma cell line, SP56, which expresses human TSHR on its cell surface. Binding analysis showed that SP56 bears 1.1 x 10(5) TSHR per cell with a Kd of 2.2 x 10(-10) M. Using the purified cellular membrane, we established a TSH binding inhibition immunoglobulin (TBII) assay for autoantibodies against TSHR. We compared it with the TBII assay utilizing porcine thyroid membranes expressing porcine TSHR, which has been widely used for TBII assay, by using 96 serum samples from patients with autoimmune thyroid disease and normal individuals. Our TBII assay was more sensitive than the one using porcine TSHR: of 38 sera of patients which were judged negative for autoantibodies to TSHR (TBII value below 10%) by the latter assay, 28 were positive (above 20%) in our assay. By using a perfusion culture system, we obtained as many as 3 x 10(10) SP56 cells, from which 3,450 mg protein of the membrane could be purified; this is sufficient for 15,000 assays. The results indicate that the membrane of the myeloma cell line SP56 is more suitable for use in the TBII assay than the porcine thyroid membrane, in terms of sensitivity to autoantibodies against TSHR in human sera.     

Microdefocusing method for measuring acoustic properties using acoustic microscope

Many papers have been reporting on measuring acoustic properties of materials by acoustic microscopy. In a conventional method of V (z) curve analysis, the phase velocity and the propagation attenuation of a leaky surface acoustic wave (LSAW) are determined from the interference period Deltaz and the slope of the V(z) curve, respectively. For this method it is necessary to measure the V(z) curve for a period several times as long as the interference period Deltaz. Therefore, it is difficult to measure the acoustic properties of a sample with high resolution by the method. In order to overcome these problems, a method called the microdefocusing method is proposed. The method determines the acoustic properties of a sample by analyzing V (z) values measured in the microdefocusing region within an interference period Deltaz near a focal plane. An ultrasonic transducer called the butterfly transducer is proposed to be applied to this microdefocusing method and a digital signal processing procedure is developed to analyze the output of the ultrasonic transducer. Basic experiments are performed to confirm the principles of the new method.     

Prolonged degradation of end-capped polyelectrolyte multilayer films

Cationic chitosan (CT) and anionic dextran sulfate (Dex) were layer-by-layer (LbL) assembled from aqueous solutions containing 1 M NaCl on a quartz crystal microbalance (QCM) substrate, and the original films ((CT-Dex)₃-CT)) were end-capped with LbL assembly from CT solutions containing 1 M NaCl and Dex solutions without NaCl. The enzymatic degradation of films by chitosanase was quantitatively analyzed by QCM in terms of numbers of end-capping steps. The degradation of films end-capped with (Dex-CT)₃ was considerably prolonged when compared to those end-capped with other end-capping steps. A mechanism for the prolonged degradation was proposed by quantitative QCM data and zeta potential results.     

CO2 hydrogenation over micro‐ and mesoporous oxides supported Ru catalysts

We prepared relatively uniform supported Ru catalysts by ion‐exchange and CVD methods, using an NaY zeolite and a mesoporous FSM‐16 as substrates, and carried out CO₂ hydrogenation. They showed high activity for CO₂ hydrogenation. A Ru‐ion‐exchanged catalyst showed high activity for methanol production. Co addition promoted methanol formation. This revised version was published online in July 2006 with corrections to the Cover Date.