The effect of structural features on mechanical properties of loose optical fiber poly(butylene terephthalate) tubes

Results of a study on the modifying mechanical properties of loose optical‐fiber poly(butylene terephthalate) (PBT) tubes, produced during the standard industrial extrusion process, show that heat treatment make the structure of their material to change. The study comprised measurements of mechanical strengths properties of the tubes (tensile strength, compression strength, kinking) and determination of tube material structure [by differential thermal analysis (DTA), wide angle X‐ray scattering analysis (WAXD), and scanning electron microscopy (SEM)]. Results of the study allowed observation that the annealing at 70°C for 34 h of the tubes caused the crystalline α phase to increase in the tube material from ～28.5% to ～31.5% and the structure of the existing crystallites to become more perfect. This made the values of certain mechanical properties of the tubes to increase even by as much as 30%. The tubes following such thermal treatment could be used in cables exposed to heavy‐duty operation in arduous environments, where a larger margin from the standpoint of mechanical properties is required. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2130–2134, 2002     

Multiple drafts and legal liability: a hazard for professionalwriters

The overall legal significance of multiple drafts of professional communications is discussed. In particular, some of the legal principles that govern the status of written documents, such as the applicable rules of court are reviewed, and the types of litigation in which previous drafts can figure prominently are examined. The possibility of multiple draft liability in light of the current emphasis on writing as a process, with writers encouraged to turn off the editorial sides of their brains during the early stages of composing, is considered     

Further evidence of responsibility of impurities in MgO for variability in its basicity and catalytic performance in oxidative coupling of methane

Further evidence was delivered that certain impurities, which could be contained in MgO samples, might be responsible for observed variability in MgO basicity and catalytic performance in oxidative coupling of methane. The surface basicity/base strength distribution of a series of MgO samples containing or not containing Ca and Na impurities was determined by a temperature-programmed desorption of CO₂. It was revealed that samples containing Ca and Na impurities have much more medium, strong and very strong basic sites. The surface basicity of MgO samples containing added alkali or alkaline earth compounds or water was characterized by a test reaction of transformation of 2-butanol. It was confirmed that the introduction of these compounds to a pure MgO enhanced both its basicity and activity in oxidative coupling of methane.     

Postintegration methods for numerical integration of non-linear dynamic equations of motion

The paper presents a family of methods with postintegration, for numerical integration of non-linear dynamic equations of motion of discrete systems. Both explicit and implicit algorithms of these methods are conditionally stable, but can give solutions of accuracy of a few orders higher than the known methods with preintegration, corresponding to them. A general analysis of stability and accuracy of single-step methods is carried out. The postintegration methods have been tested on a single-degree-of-freedom non-linear system.     

Multifactorial assessment of bulimia nervosa.

Investigated a multifactorial approach to the assessment of bulimia nervosa by means of hierarchical factor analysis. 245 bulimia nervosa patients and 68 patients with either anorexia nervosa or eating disorders not otherwise specified were administered a self-report battery that was organized into 21 dimensions relevant to eating disorder patients. When dimensions from this battery were subjected to hierarchical factor analysis, support for bulimia nervosa as a unique diagnostic category was obtained. However, the emergence of 3 secondary factors and 6 primary factors suggests that bulimia nervosa can also be described more complexly. The emergence of a multifactorial model of bulimia nervosa that incorporates several existing unidimensional models suggests the potential for both divergent and complicated clinical presentation in bulimia nervosa patients. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Association of Escherichia coli O157:H7 with preharvest leaf lettuce upon exposure to contaminated irrigation water.

Recent foodborne outbreaks have linked infection by enterohemorrhagic Escherichia coli (EHEC) serotype O157:H7 to the consumption of contaminated lettuce. Contamination via food handler error and on-the-farm contamination are thought to be responsible for several outbreaks. Though recent studies have examined the application of EHEC to store-bought lettuce, little is known about the attachment of EHEC to growing plants. We investigated the association of lettuce seedlings with EHEC O157:H7 strains implicated in lettuce or fruit outbreaks using hydroponic and soil model systems. EHEC strains that express the green fluorescent protein were observed by stereomicroscopy and confocal laser scanning microscopy to determine adherence patterns on growing lettuce seedlings. Bacteria adhered preferentially to plant roots in both model systems and to seed coats in the hydroponic system. Two of five nonpathogenic E. coli strains showed decreased adherence to seedling roots in the hydroponic system. EHEC was associated with plants in as few as 3 days in soil, and contamination levels were dose-dependent. EHEC levels associated with young plants inoculated with a low dose suggested that the bacteria had multiplied. These data suggest that preharvest crop contamination via contaminated irrigation water can occur through plant roots.     

A genetic algorithm for the optimisation of assembly sequences

This paper describes a Genetic Algorithm (GA) designed to optimise the Assembly Sequence Planning Problem (ASPP), an extremely diverse, large scale and highly constrained combinatorial problem. The modelling of the ASPP problem, which has to be able to encode any industrial-size product with realistic constraints, and the GA have been designed to accommodate any type of assembly plan and component. A number of specific modelling issues necessary for understanding the manner in which the algorithm works and how it relates to real-life problems, are succinctly presented, as they have to be taken into account/adapted/solved prior to Solving and Optimising (S/O) the problem. The GA has a classical structure but modified genetic operators, to avoid the combinatorial explosion. It works only with feasible assembly sequences and has the ability to search the entire solution space of full-scale, unabridged problems of industrial size. A case study illustrates the application of the proposed GA for a 25-components product.     

Cross-validiation of the Neuropsychology Behavior and Affect Profile in stroke patients.

Internal stability and discriminant validity of the Neuropsychology Behavior and Affect Profile (L. Nelson et al, 1989) were examined in samples of 70 stroke patients and 88 elderly controls. The test is designed to yield indices of premorbid (before-item subset) and present (now-item subset) levels of emotional functioning in each of 5 scales. With coefficient alphas ranging from .76 to .87, results indicated moderate to high internal stability. The test was also able to reliably distinguish between the criterion stroke sample (n?=?42) and a matched group of elderly controls in terms of present levels of emotional functioning (2 wks poststroke). When discriminant validity was examined in terms of premorbid emotional status (before-item subset), group differences were unexpectedly obtained. Clinical and research implications of these results are discussed, noting the possibility of early, noncognitive correlates preceding stroke. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Antiwear Action of Mineral Lubricants Modified by Conventional and Uncoventional Additives

The authors of this paper investigated the influence of esters of rapeseed oil fatty acids on the lubricating properties of mineral lubricants containing chosen AW/EP additives. Methyl esters, ethylene glycol esters, and glycerol esters as well as some commercial AW/EP packages based on zinc dialkyldithiophosphate, S–P organic compounds, and sulphurized esters of fatty acids were tested. The tribological tests were carried out with the use of a four-ball machine. Antiwear (AW) properties of tested compositions were determined using their limiting load of wear (G_oz(40)). It appears that the AW action of esters of rapeseed oil fatty acids depends on their structure. The best AW action is shown by compositions of mineral oil lubricants containing AW/EP additives and methyl esters of rapeseed oil fatty acids. The SEM/EDS analysis of the scar surface layer indicated that the presence of these esters in lubricants causes a change in the interaction between AW/EP additives and the metal surface. These observations were confirmed by the XPS surface analysis.     

A GRL-compliant iStar extension for collaborative cyber-physical systems

Requirements Engineering - Collaborative cyber-physical systems are capable of forming networks at runtime to achieve goals that are unachievable for individual systems. They do so by connecting to...