Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

Synthesis and Characterization of Hetero-metallic Oxides-Reduced Graphene Oxide Nanocomposites for Photocatalytic Applications

A new AgO.CuO.WO₃/rGO nanocomposite was designed for the investigation of the degradation ability of the hybrid material under visible light irradiation. The AgO, CuO, WO₃ NPs, and AgO.CuO.WO₃ hetero-metallic oxides were fabricated via the chemical co-precipitation method. The crystallite sizes and phase analyses were investigated by recording X-ray diffraction patterns. The crystallite sizes of three metal oxides in the AgO.CuO.WO₃ hetero metal oxide were 16.7, 15.9, and 16.9 nm, respectively. The FESEM images at various magnifications were probed to study the morphology of synthesized materials. The micrographs of hetero-metallic oxides AgO.CuO.WO₃ exposed that three metal oxides merged like small particles and gives a large bulbous appearance. EDX analyses confirmed the formation of required materials with high purity. FTIR data was in agreement with the literature which facilitated to ensure the purity of synthesized samples. The optical bandgap energy was calculated via the Tauc plot indicating that the blend of three metal oxides generated a new energy level in the electronic structure is suitable for photocatalysis in the presence of visible light. The bandgap energy of hetero metallic oxides was 1.25 eV which is less than individual metal oxides signifying the tuning of the bandgap. The incorporation of rGO in AgO.CuO.WO₃ hetero-metallic oxides gives a new photocatalyst for optimum photodegradation of methylene blue in minimum time. The percentage degradation via AgO.CuO.WO₃ was 87.20% in 70 min while the percentage degradation via AgO.CuO.WO₃/rGO recorded by photocatalytic experiment was 95% in 40 min. The photocatalysis data revealed that AgO.CuO.WO₃ hetero-metallic oxides-rGO nanocomposite ensured a strong potential to uptake organic dyes from water by promoting redox reactions during photocatalysis in the minimum time limit.     

Boosting the activity of FeOOH via integration of ZIF-12 and graphene to efficiently catalyze the oxygen evolution reaction

Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm^?2 and a low Tafel slope value of 78 mV dec^?1. The catalyst offers a maximum current density of 101 mA cm^?2, while it gives a turnover frequency (TOF) value of 0.031 s^?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support.     

Stagnation flow of hybrid nanoparticles with MHD and slip effects

The flow of hybrid nanoparticles with significant physical parameters with different base fluids in the presence of Biot number, velocity slip, and MHD effects has not been explored so far, particularly for a circular cylinder. Therefore, the current report is presented to offer a numerical solution for hybrid nanoparticles with base fluids (water and ethylene glycerol) via a circular cylinder. The physical situation is interpreted in terms of partial differential equations and is converted into ordinary differential equations after applying the similarity transformation. The results are presented in both tabular and graphical forms. The impact of physical parameters on velocity distribution is examined through graphs. The comparative results of hybrid nanoparticles for distinct base fluids as ethylene glycol and water are proposed and the hybrid nanoparticles with base fluid water seems to be greater than that of the hybrid nanoparticles with base fluid EG. The temperature profile of hybrid nanoparticles is found to be a decreasing function with growth in velocity slip parameter but an opposite trend is noted in case of nanoparticles . The skin friction and Nusselt number augmented for the increase in magnetic field, velocity slip, and nanoparticle while it shows a decreasing trend toward thermal slip parameter. For the both cases, improvement in Biot number helps enhance the heat transfer constantly.     

Deep-piRNA: Bi-Layered Prediction Model for PIWI-Interacting RNA Using Discriminative Features

Piwi-interacting Ribonucleic acids (piRNAs) molecule is a well-known subclass of small non-coding RNA molecules that are mainly responsible for maintaining genome integrity, regulating gene expression, and germline stem cell maintenance by suppressing transposon elements. The piRNAs molecule can be used for the diagnosis of multiple tumor types and drug development. Due to the vital roles of the piRNA in computational biology, the identification of piRNAs has become an important area of research in computational biology. This paper proposes a two-layer predictor to improve the prediction of piRNAs and their function using deep learning methods. The proposed model applies various feature extraction methods to consider both structure information and physicochemical properties of the biological sequences during the feature extraction process. The outcome of the proposed model is extensively evaluated using the k-fold cross-validation method. The evaluation result shows that the proposed predictor performed better than the existing models with accuracy improvement of 7.59% and 2.81% at layer I and layer II respectively. It is anticipated that the proposed model could be a beneficial tool for cancer diagnosis and precision medicine.     

Analysis of phase transition,structural and dynamical properties of R290 using molecular dynamics simulation

Propane (R290), a hydrocarbon refrigerant, is an excellent choice of cooling fluids for use in refrigeration and air conditioning systems considering the environmental point of view and system performance. The phase transition phenomenon and structural and dynamic properties of R290 were analyzed through a molecular dynamics (MD) simulation. The densities, isobaric heat capacities and viscosities were computed and the variations of density, volume, potential energy and the nucleation process were examined to investigate the effects of condensation temperature on the phase transition rate. The mean square displacement and velocity autocorrelation function for different temperatures were simulated for dynamical analysis. Radial distribution functions were investigated to get insight into the structural analysis at the atomic level. Shear viscosity and isobaric heat capacity obtained by the present simulation showed a good agreement with the REFPROP data. The structural analysis revealed that the phase transition of R290 did not affect its intramolecular structure.

     

An efficient grayscale image encryption scheme based on variable length row-column swapping operations

Multimedia Tools and Applications - Swapping a row with a row, a column with a column or row with a column are usual operations carried out to scramble the given input plain image. To introduce...     

Surface-assembled Fe-Oxide colloidal nanoparticles for high performance electrocatalytic water oxidation

Nanoscale electrocatalytic materials having enhanced electroactive sites has been considered trendier and can drive kinetically uphill OER at much lower energy cost with high efficiency. However, very complex synthetic strategies, extensive functionalization processes, and less stability have stimulated quest for economically viable, straightforward and facile preparative methods for designing stable, robust and active nanoscale electrocatalysts engaging geologically abundant materials to ensure their industrial implications. Here we present surface-assembled Fe(OH)_x/FeO_x type colloidal catalytic thin-films, with or without post annealing, derived from Fe-colloidal NPs in simple carbonate system for efficient water oxidation. Comprehensive electrochemical studies including cyclic voltammetry, chronoamperometry, chronopotentiometry, impedance spectroscopy, Tafel slope analysis, mass activity, electrochemically active surface area measurements are conducted to comparatively evaluate the performance of simple (FeO_x/HCO₃^?@FTO and annealed (FeO_x/HCO₃^?@FTO₂₅₀, FeO_x/HCO₃^?@FTO₅₀₀) catalysts for oxygen evolution reaction (OER) under employed conditions. The FeO_x/HCO₃^?@FTO₂₅₀ annealed at 250 °C initiates water oxidation at much lower overpotential of 1.52 V vs. RHE with remarkable stability during long-term electrochemical experimentations. In addition to enhanced OER activity as evidence by better onset potential (<1.55 V vs. RHE), lower Tafel slope value (36 mV dec^1?) and negligible charge transfer resistance, the Fe(OH)_x/HCO₃^?@FTO type catalyst presented excellent electroactive nature during long term controlled potential electrolysis experiments where more and more electroactive sites were getting exposed during continuous hours of electrolysis. The catalysts behave as a potential enduring, inexpensive and competent candidate for catalyzing water oxidation reaction when tested under begin conditions.