Intrinsic CFRP-metal-hybrids with rubber interface for the improvement of the damping behaviour

This paper presents an integrated passive damping approach in hybrid metal-CFRP parts for structural applications. In this concept a viscoelastic material is embedded in the joint zone of the hybrid component. To examine the connection strength single-lap-joint specimens were produced and tested and the influence of the used material combinations, different surface structures, and different process parameters i.e. the moment of cross-linking were evaluated. Afterwards, the metal-CFRP hybrids were tested in quasi-static tests to assess their connection strength and failure behaviour. Dynamic cyclic tensile tests with step-wise increased loading conditions were performed to determine the specimens damping behaviour and to estimate their fatigue performance. Finally, these results are compared to a state of the art metal-CFRP hybrid with rivets connecting both materials.     

Schutz und Trocknung

Ohne Zusammenfassung     

Symbolic analysis approach to settling time minimization in sc networks

The paper presents a method of settling time minimization in switched capacitor (SC) circuits. This problem has been discussed in recent papers because of high-frequency applications of SC networks. In comparison with the methods elaborated up to now and limited to biquads, the method presented in this paper can be used for an SC circuit containing an arbitrary number of operational amplifiers coupled together in each switching state and modelled as ideal transconductances. the fifth-order ladder bilinear SC filter is considered for illustration of the method and SPICE simulations.     

Catalyst instabilities during the liquid phase partial oxidation of methane

A promising catalytic system for the low temperature oxidation of methane to a methanol derivative has been investigated under both batch and semi-continuous operation in two different reactor types. The system comprises of a bimetallic palladium and copper(II) chloride catalyst contained in a trifluoroacetic acid (TFA) and an aqueous phase. Methane, oxygen and a co-reductant carbon monoxide constitute the gas phase. Typical operating conditions were a temperature of 85 °C and a pressure of 83 bar.

The yields of the methyl trifluoroacetate product observed in this present work were less than those obtained in other batch autoclave works, which employed only 4 ml of liquid phase, compared with 50 ml in this study. Furthermore, an encouraging initial product formation rate of ca. 40 mol/m³ h, quickly decreased after the first hour, and came to an apparent end after only 2 h. This observation had not been reported previously.

Work performed in a semi-continuous porous tube reactor (300 ml of re-circulating liquid phase) also showed the same reaction characteristics as in the batch reactor. Thus, the deteriorating product formation rate cannot be attributed to gaseous reactant depletion (batch operation). The results suggest problems associated with catalyst instabilities, e.g. with the previously elucidated Wacker chemistry.     

Binding of tissue plasminogen activator to endothelial cells. The effect on functional properties. Localization of a ligand in the B-chain of tPA

The binding of 125I-labelled tissue plasminogen activator (tPA), the tPA A- or B-chain to endothelial cells (EC) were studied in suspensions of cultured human umbilical vein EC (HUVEC) or immortalized microvascular EC (HMEC). By determinations of the concentration-dependent binding it was shown that both the A-chain and the B-chain, which were isolated after partial reduction of two-chain tPA, contain ligands for binding to EC. The affinity for the B-chain was much higher than for the A-chain according to Scatchard analysis (Kd 24 and 515 nM, respectively), whereas the number of binding sites was higher for the A-chain than for the B-chain (Bmax 8 x 10(5) and 1.2 x 10(5), respectively). There were no cross interactions between the A- and B-chains and their binding sites. The binding of tPA to EC induced an almost 100-fold increase of the activation rate when compared to the same amount of enzyme in free solution, which in contrast to the fibrin-induced stimulation was not inhibited by antibodies against fibrin. The enzymatic activity of the B-chain was much less affected by the association to the cells. Both tPA and the tPA B-chain were largely protected against inhibition by an excess plasminogen activator type-1 (PAI-1) when bound to EC, whereas the same amount of free tPA was totally inactivated. The competition studies strongly indicated that an N-terminal segment in the B-chain, AKHRRSPGER, may be the ligand part of the B-chain. It is interesting to note that this polypeptide segment also participates in a binding site for PAI-1, necessary for effective inhibition. This implies a possible competition between PAI-1 and a tPA-receptor for binding of tPA. High molecular weight urokinase had no quenching effect on the binding of the B-chain to EC.     

Surface geometry of slide bearings after percussive burnishing

A review of literature about the effect of oil pockets on improvement of sliding elements tribological performance as well as about the changes of surface topography during “zero-wear” process is shown. The paper presents also the results of experimental investigations done in the Department of Manufacturing Processes and Production Organisation of Rzeszow University of Technology, connected with the creation of oil pockets on sliding surfaces. In order to simulate a deterministic surface a program for the visualisation of pits was written. The procedures for assessment of the oil pocket size of specific shape and oil pockets coverage are presented. The tendencies of changes of surface topography and oil pockets dimensions during “zero-wear” process are also described.     

Necessary and sufficient conditions for the universality of programming formalisms

Summary Over many familiar datatypes the notion of computable coincides with the notion of flowchartable. It is also known that flowcharts are not a universal programming formalism over arbitrary datatypes, in the sense that there are datatypes over which not all computable functions are flowchartable. In this paper we consider various extensions and restrictions of the basic formalism of flowcharts, and then for every such formalism, we characterize the datatypes over which the computable functions are exactly the functions programmable in this formalism. We say that a function is computable over a datatype if it is effective relative to the primitive operations and relations of the datatype.     

Exosomal Cargo May Hold the Key to Improving Reproductive Outcomes in Dairy Cows

The reproductive status of dairy cows remains a challenge for dairy farmers worldwide, with impaired fertility linked to a significant reduction in herd profitability, due in part to impaired immunity, increased metabolic pressure, and longer postpartum anestrous interval (PPAI). Exosomes are nanovesicles released from a variety of cell types and end up in circulation, and carry proteins, bioactive peptides, lipids, and nucleic acids specific to the place of origin. As such, their role in health and disease has been investigated in humans and animals. This review discusses research into exosomes in the context of reproduction in dairy herds and introduces recent advances in mass-spectrometry (MS) based proteomics that have a potential to advance quantitative profiling of exosomal protein cargo in a search for early biomarkers of cattle fertility.