Flow visualization of Rayleigh–Bénard convection for cubical cavity

Natural convective flow of air inside the cubical cavity is investigated numerically. The temperature of the bottom wall is kept higher than that of top cold wall, and other four walls are assumed to be adiabatic. Attention has been paid to the convective discretization schemes, like upwind, QUICK, total variation diminishing, normalized variable diagram (NVD) schemes that are compared with respect to accuracy. The output is validated with respect to the results available in the literature. A parallel computing message passing interface code is adapted to run the simulations. From the results, it is observed that the NVD scheme gives better results among all the employed convective discretization schemes irrespective of the mesh structure. Thus, in this article, self filtered central differencing which is a family of NVD, is used. From the enormous output data, along with the streamlines, contours of isotherms, the new technique of energy pathlines, and field synergy are used to visualize the fluid flow and heat transfer mechanism arising in the system in the range of Ra from 10³ to 10⁶. Free energy streamlines are observed with small Ra, whereas trapped energy streamlines are observed with high Ra. When Ra increases, synergy angle increases and implies that the synergy between the velocity vector and temperature gradient gets reduced and leads to increasing values of average Nusselt number (Nu).     

Degumming of Tasar silk using imidazolium-based ionic liquids

Abstract

In the present work, degumming of Tasar silk was carried out using novel reagents, the ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride [BMIM]Cl and 1-butyl-3-methyl-imidazolium hydrogen sulphate [BMIM]HSO₄.The results on weight loss, tensile strength loss and absorbency were compared with soda ash-H₂O₂ method. These treatments were carried out under conventional heating, sonication and microwave irradiation as different techniques of energy input. The ILs showed higher weight loss and absorbency with negligible strength loss as compared to the soda ash-H₂O₂ method, [BMIM]Cl being the most effective with further advantage of working at nearly neutral pH. The treatments under sonication and microwave showed increasingly higher efficiency as compared to the conventional heating. The chemical structure of Tasar silk, as estimated by FTIR spectroscopy, and the crystalline structure, as elucidated by X-ray diffraction, remained unchanged. SEM images showed that the surface of Tasar silk degummed with ILs was smoother. The dye uptake was nearly the same for all degummed samples. A further advantage is accrued by recyclability of ILs, which makes the process cost effective.     

Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy

ABSTRACT

A combined analytical and experimental study was carried out to analyze the effects of cryogenic cooling on temperature during turning of AZ31C magnesium alloy. Finite element method was employed to model and simulating the cryogenic and dry turning. Results obtained from the model were found to be in good agreement with the experimental observations. For the maximum temperature at the turned surface, the difference in the experimental and predicted value observed during dry and cryogenic turning was only 4 and 8% respectively. A significant reduction in the maximum temperature on the chip surface (around 35%) and tool surface (around 29%) was observed during the cryogenic turning compared to dry turning. This reduction in temperature was an attribute of liquid nitrogen, which produces intense cooling effect around the vicinity cutting zone where heat generation takes place hence enhancing the heat transfer. The isothermal region belonging to the highest temperature on the tool surface was also reduced by about 42%. The reduction in temperature during cryogenic conditions were found to be beneficial for the machining of magnesium alloys under safe conditions, reducing the risk of ignition and explosions, and also increases the sustainability of the process.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.     

Design and analysis of a sleep and wake-up CMOS low noise amplifier for 5G applications

Telecommunication Systems - This brief proposes a two-stage cascoded CMOS LNA with common drain envelope detection based power reduction method for the 5G applications of 28 GHz frequency....     

Comparative Analysis of Double Gate Junction Less (DG JL) and Gate Stacked Double Gate Junction Less (GS DG JL) MOSFETs

Semiconductors - The quest for downscaling of devices has led to novel configurations with better performance parameters of which Junction Less (JL) MOSFET is an important configuration regarding...     

Corrosion inhibition of mild steel in 1 M HCl using Tamarindus indica extract: electrochemical,surface and spectroscopic studies

Abstract

We report, here, the corrosion inhibition of mild steel specimen in 1?M HCl by tamarind fruit pulp aqueous (TFPA) extract. The inhibition property in the presence of TFPA extract is studied using weight loss, polarization measurement and electrochemical impedance spectroscopy (EIS). The inhibitor efficiency is found to vary from 74% to 88% (weight loss method) with TFPA concentration of 100–600?ppm. The reduction in Tafel slopes shows that TFPA acts as a mixed-type inhibitor. The adsorption of the inhibitor on the metal surface follows Langmuir isotherm. The standard Gibbs free energy of adsorption value of –40?kJ/mol suggests the chemisorption of inhibitor molecules via coordinate bond. AFM results exhibit a decrease in the surface roughness of mild steel, exposed to 1?M HCl from 299?±?12 to 154?±?6.6?nm, with increasing concentration of inhibitor from 0 to 600?ppm due to the uniform coverage of inhibitor molecules on the metal surface. X-ray photoelectron spectroscopy de-convoluted high resolution profiles of C 1?s (carbon) for mild steel exposed to 1?M HCl with 600?ppm inhibitor show major peaks corresponding to sp³ C–C/C–H (284.9?eV) and oxygen bondings in C–OH, C=O, COOH with a binding energy of 285.9, 286.9, 288.5?eV, respectively, thereby confirming the adsorption of organic moieties on mild steel surface. Fourier transform infrared spectroscopy further confirms the adsorption of inhibitor molecules on the metal surface. Therefore, tamarind fruit pulp extract is a potential corrosion inhibitor for mild steel, which is cost-effective, green and non-toxic.     

Dielectric relaxation and conduction mechanism of complex perovskite Ca0.90Sr0.10Cu3Ti3.95Zn0.05O12 ceramic

In this work, Sr and Zn co-doped calcium copper titanate having nominal formula Ca_0.90Sr_0.10Cu₃Ti_3.95Zn_0.05O₁₂ has been synthesized and systematically studied for structure, dielectric and electrical properties. The phase purity of the prepared composition has been confirmed by X-ray diffraction (XRD) pattern and various structural parameters are presented here with Rietveld refinement data. The Scanning electron microscopy (SEM) image revealed the presence of homogeneous fine-grained microstructure investigated in the prepared ceramic. The impedance data well fitted with 2 R-CPE model confirmed the non-ideality of the system. Dielectric studies have shown the existence of two relaxation processes in low and high frequency domains. Low frequency dielectric response proposed as a combination of Maxwell-Wagner relaxation and intrinsic defect (V_o⁺⁺) while high frequency behavior has been interpreted in terms of polaronic relaxation caused by hopping process of an electron between Ti³⁺ and Ti⁴⁺ states. The frequency dependent behavior of conductivity has been well fitted to Dong’s model and interpreted in term of Overlapping Large Polaron Tunneling (OLPT) mechanism. The various parameters; relaxation angular frequency (ω₁) of Debye process, ionic hopping frequency (ω₂₎, dc conductivity (σ_o), cole- cole parameter (α) and frequency exponent (s) have been determined by Dong’s Model fitting.