Aphid deterrence by glucose esters in glandular trichome exudate of the wild tomato,Lycopersicon pennellii

Settling of the potato aphid,Macrosiphum euphorbiae, on feeding membranes was deterred by methanolic leaf rinses ofLycopersicon pennellii, or of its F₁ with tomato,L. esculentum. The active compounds in theL. pennellii rinsates were identified as 2,3,4-tri-O-acylglucoses bearing short to medium chain length fatty acids. These compounds are localized in the glandular exudate of the type IV trichomes and may accumulate to levels in excess of 400 g/cm². In choice assays, purified glucose esters fromL. pennellii reduced aphid settling at concentrations as low as 25 g/cm²; at concentrations of 150 g/cm² or more, all aphids avoided treated areas. Glucose esters were also active in deterring aphid settling in no-choice assays. At 100 g/ cm², these esters resulted in increased levels of mortality after 48 hr.     

Wear resistant solid lubricant coating made from PTFE and epoxy

A composite coating of polytetrafluoroethylene and epoxy shows 100 × improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is believed to reduce the wear of the PTFE, (2) the epoxy increases the mechanical properties such as elastic modulus and hardness, and (3) the epoxy provides a ready interface to bond the films onto a wide variety of substrates easily and securely. The experimental matrix had normal loads of 1–3 N, sliding speeds from 0.25 to 2.5 m/s, and used a 2.4 mm radius low carbon steel pin in a rotating pin-on-disk tribometer. The skived PTFE films had wear rates on the order of K=10^–3 mm³/Nm and friction coefficients around =0.2. Both the high density films (70 wt%PTFE) and low density films (50 wt% PTFE) had wear rates on the order of K=10^–6 mm³/Nm and friction coefficients around =0.15. The neat epoxy films showed significant scatter in the tribological measurements with wear-rates on the order of K=10^–4 mm³/Nm and friction coefficients around =0.40. The enhanced tribological behavior of these composites is believed to stem from the coatings ability to draw thin PTFE transfer films into the contact from the nodes of PTFE, which act like reservoirs. Nanoindentation mapping of the coatings and the transfer films supports this hypothesis, and accompanies scanning electron microscopy observations of the worn and unworn coatings.     

The use of bifunctional polyethyleneglycol derivatives for coupling of proteins to and cross-linking of collagen matrices

The realization of three-dimensional (3D) degradable matrices which slowly release bio-active components represents a major challenge in the field of tissue engineering. In this paper we report on the usage of commercially available bifunctional agents for both the covalent coupling of proteins to and the cross-linking of collagen matrices. Proteins – horse radish peroxidase (HRP) was used as a model protein – were cross-linked with either a homobifunctional (disuccinimidyldisuccinatepolyethylene-glycol) or a heterobifunctional (N-hydroxysuccinimidylvinylsulfonepolyethyleneglycol) agent. In the case of the heterobifunctional cross-linking agent the collagen matrices were previously modified with succinimidylacetylthioacetate in order to introduce sulfhydryl groups. As compared with control experiments a 10-fold and 50-fold increase of immobilized proteins were achieved with the homobifunctional and heterobifunctional cross-linker resp. The HRP–PEG conjugates demonstrated a better long-term stability as compared to the non-treated HRP. The effects of the cross-linking agents and the thiolation reagent succinimidylacetylthio acetate on the in vitro degradation of the collagen matrices by collagenase were also investigated. In particular the reaction with succinimidylacetylthio acetate appears to offer interesting opportunities both for coupling active proteins and modulating the degradation times of collagen matrices.     

Chemical and microbiological quality of grass carp (Ctenopharyngodon idella) slaughtered by different methods

The effect of two slaughter methods (immersion in ice-water slurry and electrical stunning followed by ice slurry asphyxiation) on chemical and microbiological parameters of grass carp (Ctenopharyngodon idella) stored in ice for 20 days was evaluated. No differences in total volatile basic nitrogen (TVB-N), pH, carbohydrate or protein content of mucus were observed between the slaughter methods. Ice-slaughtered fish had lower bacteria counts at the beginning of storage, but higher counts than fish slaughtered by electricity at the end of storage (p < 0.05). However, no significant differences in the shelf life were observed between the slaughter methods evaluated (limit of acceptability – counts > 3 × 10⁶ CFU g⁻¹ – attained after 13–16 days). Results indicated that the chemical parameters evaluated have a limited applicability to assess the shelf life of grass carp stored in ice, since pH limit (6.8) was exceeded after 4 days, while TVB-N limit (30 mg%) was not attained after 20 days of storage.     

Quantifying low amorphous or crystalline amounts of alpha-lactose-monohydrate using X-ray powder diffraction, near-infrared spectroscopy, and differential scanning calorimetry

Efficient and accurate quantification of low amorphous and crystalline contents within pharmaceutical materials still remains a challenging task in the pharmaceutical industry. Since X-ray powder diffraction (XRPD) equipment has improved in recent years, our aim was 1) to investigate the possibility of substantially lowering the detection limits of amorphous or crystalline material to about 1% or 0.5% w/w respectively by applying conventional Bragg Brentano optics, combined with a fast and simple evaluation technique; 2) to perform these measurements within a short time to make it suitable for routine analysis; and 3) to subject the same data sets to a partial least squares regression (PLSR) in order to investigate whether it is possible to improve accuracy and precision compared to the standard integration method. Near-infrared spectroscopy (NIRS) and differential scanning calorimetry (DSC) were chosen as reference method. As model substance, alpha lactose monohydrate was chosen to create calibration curves based on predetermined mixtures of highly crystalline and amorphous substance. In contrast to DSC, XRPD and NIRS revealed an excellent linearity, precision, and accuracy with the percent of crystalline amount and a detectability down to about 0.5% w/w. Chemometric evaluation (partial least squares regression) applied to the XRPD data further improved the quality of our calibration.     

Rißfortschritt in ultrafesten Stählen und deren Schweißverbindungen bei dynamischer Beanspruchung

Crack propagation in ultra-high-strength steels and their welded joints under dynamic loading . Reported are results of investigation into the propagation of cracks in the base metal and weld metal of an ultra-high-strength steel. The material used in the investigations was a Ni? Co? Mo? alloy maraging steel with a yield point of 170 kp/mm². The steel was arc welded and TIG welded. The joints exhibited a drop of static strength in the range of 5 to 8 percent related to the base metal. Under zero-to-tension stress cycles the fatigue strength corresponded that of other high-strength steels, under tension-compression stress cycles the steel exhibited a higher fatigue strength. It was possible to show striations with the aid of scanning microscopy. Comparing the track propagation calculated in the microscopic range with the results obtained from the crack growth curves produced approximate agreement.     

Behavioral medicine and aging.

A brief history of behavioral medicine and aging is followed by a series of perspectives that help to understand how age is used as a variable in this research, the relative importance of age to declines in cognitive functioning, and the impact of behavioral risk indicators on healthy survival. The authors discuss Alzheimer's disease and the role of age in clinical practice. Also discussed are potential problems in age-related research, ways to improve the knowledge base in behavioral medicine and aging, and thoughts about future challenges to enhance work in behavioral medicine and aging. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fertigungstechnische Beeinflussung der Erstarrungsvorgänge beim Hochtemperaturlöten unter Druckaufbringung

The Influence of High Temperature Brazing under Defined Load on Crystallisation Behaviour of Filler Materials The crystallisation behaviour of high temperature filler metals has to be examined in regard to it's volume increase during solidification. Thermodynamic laws show that an increase of pressure may hinder the growth of phases. This optimizes the quality of the joints.     

Goal-oriented <Emphasis Type="Italic">h</Emphasis>-adaptivity for the Helmholtz equation: error estimates,local indicators and refinement strategies

This paper introduces a new goal-oriented adaptive technique based on a simple and effective post-process of the finite element approximations. The goal-oriented character of the estimate is achieved by analyzing both the direct problem and an auxiliary problem, denoted as adjoint or dual problem, which is related to the quantity of interest. Thus, the error estimation technique proposed in this paper would fall into the category of recovery-type explicit residual a posteriori error estimates. The procedure is valid for general linear quantities of interest and it is also extended to non-linear ones. The numerical examples demonstrate the efficiency of the proposed approach and discuss: (1) different error representations, (2) assessment of the dispersion error, and (3) different remeshing criteria.