Spectral radiance reconstruction from trichromatic camera responses based on orthogonal test and regularized algorithm

Reconstruction of spectral information based on multi‐channel image system is a significant problem in color reproduction, detection, and recognition. A spectral radiance reconstruction from trichromatic digital camera responses is researched in this article. The mapping relationship between the trichromatic imaging system response and the incident spectral radiance is analyzed. Then, in order to remove the ill‐posedness of the problem, a regularized constraint solution model of spectral radiance reconstruction matrix is established. And the spectral radiance can be reconstructed by spectral radiance reconstruction matrices and trichromatic imaging system response. Finally, the spectral radiance reconstruction matrix is estimated by the system radiometric calibration experiment. The input radiance is offered by a LCD display. A 3‐factor and 9‐level orthogonal test is designed for the calibration experiment, and a test set of 24 colors is used for precision analysis. The results show that the average relative mean error of our method is 8.69%, it is lower than that of Wiener filtering method by 2.84%. The method can reconstruct spectral radiance information effectively.     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Effect of environmental pressure on the microstructure of YSZ thermal barrier coating via suspension plasma spraying

Suspension plasma spraying (SPS) as a potential technique to prepare thermal barrier coatings (TBCs) has been attracting more and more attention. However, most reports on SPS were carried out in the atmosphere. Given the unique features of in-flight particles and plasma jets under low pressure, the resulting coatings are expected to be different from those under atmospheric pressure. In this article, yttria-stabilized zirconia (YSZ) thermal barrier coatings were prepared using suspension plasma spraying under different environmental pressures. The results show that as the environmental pressure decreased, the column-like structural coating turned into a vertical crack segmented structure, as well as a dramatic decrease in surface roughness. More nanoparticle agglomerates were formed in the coating under lower environmental pressures. The real porosity of the coating increased with a decrease in environmental pressure.     

一种关于旅行商问题适用范围的优化方法

针对旅行商问题适用范围存在的局限性,结合实际的仓库拣货作业优化实例开展研究.考虑仓库内各货位点之间的相对位置关系以及拣货员可能行走的路线,设计出关于拣货员行走路线的分类算法;提出虚拟点的概念来解决旅行商问题求解时起点、终点不一致的问题;利用虚拟点,根据任务单要求找出拣货员所有的最优位置访问顺序;比较每一种情况,得到拣货员的最优路径,以实现缩短拣货总时间、减少人力和物力的总目标,较好地提高拣货效率.     

偏铁酸钠催化合成共轭亚油酸

以红花菜籽油中亚油酸为原料,偏铁酸钠为催化剂,在单因素试验的基础上,选取反应温度、反应时间、催化剂用量为考察因素,以异构化产物共轭亚油酸(CLA)转化率为响应值,通过响应面分析法对异构化反应进行优化,并建立相应的回归模型,试验结果表明,红花菜籽油中亚油酸异构化为CLA的最佳工艺为:反应温度195℃、反应时间4.7 h、催化剂用量0.6 g,在此条件下得到CLA转化率为92.90％,与预测值93.92％相比,误差为1.02％.然后再通过脲素包合纯化、经2％的H2SO4-CH3OH溶液甲酯化后,用气相色谱-质谱联用仪检测CLA含量为64.27％.     

Theoretical analysis and test verification of pull-out forces in shear connectors of composite beam under negative bending moment

Abstract

A mechanical model of steel-concrete composite beams considering horizontal slip and vertical pull-out effects under negative bending moment was established based on the theory of elastic deformation. By using the principle of force equilibrium and deformation compatibility condition, the differential equation was derived and deduced using computational calculation program, in which the formula of the pull-out force in shear connectors under negative bending moment was obtained. The experiment was conducted in order to verify the reliability of theoretical results. The results show: under the same load condition, the pull-out force of a single stud increases with the increase of the stud spacing. All the theoretical results were verified by comparing with experiment results to illustrate the accuracy and reliability of the calculation method. It provides a theoretical reference for the study of the interface interaction considering horizontal slip and vertical pull-out effect in the negative bending moment region of continuous composite beams.     

Extraction and characterisation of pectin polysaccharide from soybean dreg and its dispersion stability in acidified milk drink

In this study, pectin polysaccharide (SDPP) was obtained from soybean dreg (26.2% yield), and characteristics of SDPP were compared with those of soybean soluble polysaccharides (SSPS) and citrus pectin (HMP). The galacturonic acid and molecular weight of SSPS, SDPP or HMP were 11.8%, 40.6% or 70.2% and 112, 446, or 440 kDa. SDPP had similar viscosity and protein content to SSPS, and functional groups and linear structure to HMP. SSPS, SDPP or HMP differed in particle size of 260, 467 or 1195 nm and ζ–potential of −5.8, −14.6 or −23.5 mV at pH 4.0. The precipitation of acidified milk drink (AMD) was 6.31% without stabiliser or below 1.75% with 0.4% SDPP at pH 3.6–4.6. These results suggested that SDPP combines the structure and characteristic of HMP and SSPS, and AMD with SDPP had great stabilising behaviour at wider pH range (pH 3.6–4.6).     

M- S-H formation in MgO-SiO2slurries via wet milling for magnesia based castables

It is believed that the formation of hydration phase, MgO-SiO₂-H₂O (M-S-H), contributes to good workability and reliable comprehensive properties for magnesia based castables. In order to stimulate the formation of M-S-H in magnesia based castables and understand the minimum introduction of microslica amount, wet milling process was used to promote the dissolution of MgO and SiO₂ in this work. The slurry containing different content of microsilica with wet milling technology and the castables with/without wet milling slurry were prepared. The effects of microsilica content on the formation of hydration phases were analyzed by XRD, FT-IR and TG/DSC and the properties of magnesia based castables were evaluated by explosion resistance, CMOR, HMOR and so on. The results showed that the formation of M-S-H was accelerated because of the dissolution of Mg²⁺ and HSiO₃^? in wet milling process. Higher amount of M-S-H led to a tight bonding in the early stage, and a denser structure after firing at high temperature due to the limited formation of brucite and in-situ formation of evenly distributed forsterite phase. In addition, much higher HMOR were obtained when less microsilica was added, attributing to the suppressed formation of low-melting-point liquid. Therefore, 2–3 wt% microsilica addition was recommended in this process.     

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

The effects of La₂O₃–Al₂O₃–SiO₂ addition on the thermal conductivity, coefficient of thermal expansion (CTE), Young's modulus and cyclic thermal shock resistance of hot-pressed h-BN composite ceramics were investigated. The samples were heated to 1000 °C and then quenched to room temperature with 1–50 cycles, and the residual flexural strength was used to evaluate cyclic thermal shock resistance. h-BN composite ceramics containing 10 vol% La₂O₃–Al₂O₃ and 20 vol% SiO₂ addition exhibited the highest flexural strength, thermal conductivity and relatively low CTE, which were beneficial to the excellent thermal shock resistance. In addition, the viscous amorphous phase of ternary La₂O₃–Al₂O₃–SiO₂ system could accommodate and relax thermal stress contributing to the high thermal shock resistance. Therefore, the residual flexural strength still maintained the value of 234.3 MPa (86.9% of initial strength) after 50 cycles of thermal shock.