镶嵌式框架围护结构典型节点热桥模拟分析

介绍了镶嵌式框架围护结构体系,以北京地区气候条件为计算参数,利用模拟软件,模拟分析了不同形式镶嵌式框架围护结构中典型节点的温度分布规律,结果表明该体系能够避免热桥部分产生结露问题;还分析了不同节点处的热流分布,表明该体系的节能效果可基本满足北京市居住建筑的节能设计要求。     

Delays to Large Construction Projects in Ghana： A Risk Overview

Delay to large scale projects, which is as a result of actions or inactions of some project stakeholders, is becoming a global phenomena and Ghana is no exception. The objective of the research is to identify, rate and rank the most significant risk factors that causes delay on projects and examine the social impact of these delays to recommend modalities to help mitigate these risk factors. The study adopted quantitative methods with the distribution of 144 questionnaires to built environment professionals receiving a response rate of 75.7%. The instrument listed 58 common factors under eight categories that contribute to the causes of delay for respondents to rate. Analysis of data non-parametric test revealed that client, contractor, material and finance category factors significantly resulted in the schedule delay of large infrastructural projects. The survey analysis revealed that micro-factors that result in delays to large construction projects are time constraint, cost overrun, payment problems, dispute and litigation. The research recommended the following modalities to minimize such delays： availability of resources, improved communication and coordination, proper scope definition and feasibilities, utilization of modern technology, appropriate application of technologically based systems and competent project management＇s structures.     

磷酸硼对樟子松的阻燃影响

采用磷酸硼对木材进行改性处理,测定了处理后试材的阻燃性、抗流失性、吸湿性、力学性能.研究结果表明,磷酸硼处理后试材,吸药量达到20.47 kg/m3以上时,垂直燃烧实验可达到到F-0级水平；通过灼烧实验,磷酸硼处理的木粉在500℃灼烧时残留率可达到97.997％;此改性剂具有较好阻燃性能和一定的抗流失性,常压下磷酸硼处理的樟子松试件LRV为50.28％；木材顺纹抗压强度平均下降了 8.67％,无明显变化;木材抗弯曲压强度平均下降了 27.95％.但磷酸硼阻燃剂在高湿条件下有一定的吸湿性,使用性能有待改进,并应注意采取防护措施.     

2,4,6-三甲基苯乙酸的合成新方法

以2,4,6-三甲基苯甲醛为原料,通过相转移催化反应在水-氯仿体系中先合成α-羟基-2,4,6-三甲基苯乙酸(收率52%);再通过次磷酸还原α-羟基-2,4,6-三甲基苯乙酸得到最终产物2,4,6-三甲基苯乙酸(收率91%)。此法绿色便捷,成本相对较低。     

Fluid-based Slotting Optimization for Automated Order Picking System with Multiple Dispenser Types

Slotting strategy heavily influences the throughput and operational cost of automated order picking system with multiple dispenser types, which is called the complex automated order picking system (CAOPS). Existing research either focuses on one aspect of the slotting optimization problem or only considers one part of CAOPS, such as the Low-volume Dispensers, to develop corresponding slotting strategies. In order to provide a comprehensive and systemic approach, a fluid-based slotting strategy is proposed in this paper. The configuration of CAOPS is presented with specific reference to its fast-picking and restocking subsystems. Based on extended fluid model, a nonlinear mathematical programming model is developed to determine the optimal volume allotted to each stock keeping unit (SKU) in a certain mode by minimize the restocking cost of that mode. Conclusion from the allocation model is specified for the storage modules of high-volume dispensers and low-volume dispensers. Optimal allocation of storage resources in the fast-picking area of CAOPS is then discussed with the aim of identifying the optimal space of each picking mode. The SKU assignment problem referring to the total restocking cost of CAOPS is analyzed and a greedy heuristic with low time complexity is developed according to the characteristics of CAOPS. Real life application from the tobacco industry is presented in order to exemplify the proposed slotting strategy and assess the effectiveness of the developed methodology. Entry-item-quantity (EIQ) based experiential solutions and proposed-model-based near-optimal solutions are compared. The comparison results show that the proposed strategy generates a savings of over 18% referring to the total restocking cost over one-year period. The strategy proposed in this paper, which can handle the multiple dispenser types, provides a practical quantitative slotting method for CAOPS and can help picking-system-designers make slotting decisions efficiently and effectively.     

Estrogen receptor domains E and F: role in dimerization and interaction with coactivator RIP-140

We have used the yeast two-hybrid system to localize the ligand-dependent dimerization domain of the estrogen receptor-alpha (ER) to region E in vivo. In this system, the cDNAs corresponding to the A-D, E, E/F, A-E (deltaF), and full-length (wtER) domains of the human ER were each cloned into the yeast two-hybrid vectors GAL4 DB and GAL4 TA and expressed in different combinations in yeast harboring a GAL1-lacZ reporter. The reporter was used as a relative measure of the interaction between the ER domains, through reconstitution of GAL4 activity. We found that the interaction of E or E/F domains of the ER with full-length ER is estradiol dependent and estrogen responsive element independent, as measured by the reconstitution of GAL4 activity from GAL4-E domain-containing fusion protein interactions. In the presence of F domain, this activity is reduced 10-fold. The results suggest that sequences in the F domain are inhibitory to the dimerization signal that is present in the E region. We propose that the full-length ER contains intrinsic dimerization restraints contributed by regions outside domain E that are released upon binding hormone agonist. In addition, we have demonstrated that coactivator RIP140 is able to interact with the ER in vivo at the E domain of the receptor in the presence of estrogen. Yeast two-hybrid analysis shows that RIP140 does not homodimerize in the presence or absence of estrogens. We present evidence showing that the ER has the inherent ability to interact with RIP140 in the presence of antiestrogens, but sequences inherent in the ER itself that are present outside of the E domain compromise this ability.     

Sympathetic response to stimulation of the pontine A5 region in conscious rabbits

OBJECT: This study is a retrospective analysis of clinical data obtained in 28 patients affected by obstructive hydrocephalus who presented with signs of midbrain dysfunction during episodes of shunt malfunction. METHODS: All patients presented with an upward gaze palsy, sometimes associated with other signs of oculomotor dysfunction. In seven cases the ocular signs remained isolated and resolved rapidly after shunt revision. In 21 cases the ocular signs were variably associated with other clinical manifestations such as pyramidal and extrapyramidal deficits, memory disturbances, mutism, or alterations in consciousness. Resolution of these symptoms after shunt revision was usually slow. In four cases a transient paradoxical aggravation was observed at the time of shunt revision. In 11 cases ventriculocistemostomy allowed resolution of the symptoms and withdrawal of the shunt. Simultaneous supratentorial and infratentorial intracranial pressure recordings performed in seven of the patients showed a pressure gradient between the supratentorial and infratentorial compartments, with a higher supratentorial pressure before shunt revision. Inversion of this pressure gradient was observed after shunt revision and resolution of the gradient was observed in one case after third ventriculostomy. In six recent cases, a focal midbrain hyperintensity was evidenced on T2-weighted magnetic resonance imaging sequences at the time of shunt malfunction. This rapidly resolved after the patient underwent third ventriculostomy. CONCLUSIONS: It is probable that in obstructive hydrocephalus, at the time of shunt malfunction, the development of a transtentorial pressure gradient could initially induce a functional impairment of the upper midbrain, inducing upward gaze palsy. The persistence of the gradient could lead to a global dysfunction of the upper midbrain. Third ventriculostomy contributes to equalization of cerebrospinal fluid pressure across the tentorium by restoring free communication between the infratentorial and supratentorial compartments, resulting in resolution of the patient's clinical symptoms.     

APIC position paper: hepatitis C exposure in the health care setting. Association for Professionals in Infection Control and Epidemiology, Inc

The Association for Professionals in Infection Control and Epidemiology, Inc (APIC), is a multidisciplinary, voluntary, international organization of professionals who practice infection control and the application of epidemiology in all health settings. APIC is an international leader in prevention and control of infection transmission.     

Billing third party payers for pharmaceutical care services

OBJECTIVE: To describe the steps pharmacists must complete when seeking compensation from third party payers for pharmaceutical care services. DATA SOURCES: Government publications; professional publications, including manuals and newsletters; authors' personal experience. DATA SYNTHESIS: Pharmacists in increasing numbers are meeting with success in getting reimbursed by third party payers for patient care activities. However, many pharmacists remain reluctant to seek compensation because they do not understand the steps involved. Preparatory steps include obtaining a provider/supplier number, procuring appropriate claim forms, developing data collection and documentation systems, establishing professional fees, creating a marketing plan, and developing an accounting system. To bill for specific patient care services, pharmacists need to collect the patient's insurance information, obtain a statement of medical necessity from the patient's physician, complete the appropriate claim form accurately, and submit the claim with supporting documentation to the insurer. Although many claims from pharmacists are rejected initially, pharmacists who work with third party payers to understand the reasons for denial of payment often receive compensation when claims are resubmitted. CONCLUSION: Pharmacists who follow these guidelines for billing third party payers for pharmaceutical care services should notice an increase in the number of paid claims.