How far droplets can move in indoor environments--revisiting the Wells evaporation-falling curve

A large number of infectious diseases are believed to be transmitted between people via large droplets and by airborne routes. An understanding of evaporation and dispersion of droplets and droplet nuclei is not only significant for developing effective engineering control methods for infectious diseases but also for exploring the basic transmission mechanisms of the infectious diseases. How far droplets can move is related to how far droplet-borne diseases can transmit. A simple physical model is developed and used here to investigate the evaporation and movement of droplets expelled during respiratory activities; in particular, the well-known Wells evaporation-falling curve of droplets is revisited considering the effect of relative humidity, air speed, and respiratory jets. Our simple model considers the movement of exhaled air, as well as the evaporation and movement of a single droplet. Exhaled air is treated as a steady-state non-isothermal (warm) jet horizontally issuing into stagnant surrounding air. A droplet is assumed to evaporate and move in this non-isothermal jet. Calculations are performed for both pure water droplets and droplets of sodium chloride (physiological saline) solution (0.9% w/v). We calculate the droplet lifetimes and how droplet size changes, as well as how far the droplets travel in different relative humidities. Our results indicate that a droplet's size predominately dictates its evaporation and movement after being expelled. The sizes of the largest droplets that would totally evaporate before falling 2 m away are determined under different conditions. The maximum horizontal distances that droplets can reach during different respiratory activities are also obtained. Our study is useful for developing effective prevention measures for controlling infectious diseases in hospitals and in the community at large. PRACTICAL IMPLICATIONS: Our study reveals that for respiratory exhalation flows, the sizes of the largest droplets that would totally evaporate before falling 2 m away are between 60 and 100 microm, and these expelled large droplets are carried more than 6 m away by exhaled air at a velocity of 50 m/s (sneezing), more than 2 m away at a velocity of 10 m/s (coughing) and less than 1 m away at a velocity of 1 m/s (breathing). These findings are useful for developing effective engineering control methods for infectious diseases, and also for exploring the basic transmission mechanisms of the infectious diseases. There is a need to examine the air distribution systems in hospital wards for controlling both airborne and droplet-borne transmitted diseases.     

Sieving of aerosol particles with metal screens

Metal screens with uniform micrometer-sized opening were employed to sieve aerosol particles by suppressing the adhesion of particles smaller than the openings. The collection efficiencies of monodispersed polystyrene latex (PSL) particles were experimentally determined using the metal screens with 1.2, 1.8, 2.5, and 4.2 μm openings at various filtration velocities. The particles smaller than the mesh opening adhered on the metal screen at a low filtration velocity, but the bounce-off of particles on the mesh surface suppressed the adhesion at a high velocity. As a result, we found that the adhesion of PSL particles larger than 0.3 μm mostly suppressed at a filtration velocity higher than 10 m s^?1 and therefore we can sieve aerosol particles according to the opening size of metal screens. We also found that the particle number concentration could be determined by measuring the increase in pressure drop since the clogging of metal screen openings takes place by the individual particles.

© 2016 American Association for Aerosol Research     

Deposition of lead and cadmium released by cigarette smoke in dental structures and resin composite

Cigarette smoke is a significant source of cadmium, lead, and toxic elements, which are absorbed into the human organism. In this context, the aim of this study was to investigate in vitro the presence of toxic elements, cadmium, and lead deriving from cigarette smoke in the resin composite, dentine, and dental enamel. Eight cylindrical specimens were fabricated from resin composite, bovine enamel, and root dentin fragments that were wet ground and polished with abrasive paper to obtain sections with 6‐mm diameter and 2‐mm thickness. All specimens were exposed to the smoke of 10 cigarettes/day during 8 days. After the simulation of the cigarette smoke, the specimens were examined with scanning electron microscopy (SEM) and the energy‐dispersive X‐ray analysis. In the photomicrographic analysis in SEM, no morphological alterations were found; however, the microanalysis identified the presence of cadmium, arsenic, and lead in the different specimens. These findings suggest that the deposition of these elements derived from cigarette smoke could be favored by dental structures and resin composite. Microsc. Res. Tech., 2010. © 2010 Wiley‐Liss, Inc.     

Advanced HSLA Steels for Automotive Use

Characteristic HSLA steels for automotive use are introduced in which both of precipitation and microstructure is controlled to obtain suitable mechanical properties.For outer panels such as fender,the combination of low yield strength,high tensile strength and deep-drawability were realized by controlling the distribution of NbC and precipitation free zone.The other steel,developed for chassis parts such as lower arm,utilizes extremely fine interphase precipitation to obtain high yield strength and excellent hole expansionability.Both steels have contributed to the reduction of weight in car body.     

Osteogenic activity of human periosteal sheets cultured on salmon collagen-coated ePTFE meshes

Our animal implantation studies have demonstrated that, after osteogenic processing, cultured human periosteal sheets form osteoid tissue ectopically without the aid of conventional scaffolding materials. To improve the osteogenic activity of these periosteal sheets, we have tested the effects of including a scaffold made of salmon collagen-coated ePTFE mesh. Periosteal sheets were produced with minimal manipulation without enzymatic digestion. Outgrown cells penetrated into the coated mesh fiber networks to form complex multicellular layers and increased expression of alkaline phosphatase activity in response to the osteoinduction. In vitro mineralization was notably enhanced in the original tissue segment regions, but numerous micro-mineral deposits were also formed on the coated-fiber networks. When implanted subcutaneously into nude mice, periosteal sheets efficiently form osteoid around the mineral deposits. These findings suggest that the intricate three-dimensional mesh composed of collagen-coated fibers substantially augmented the osteogenic activity of human periosteal sheets both in vitro and in vivo.     

Migration of 4-nonylphenol from polyvinyl chloride food packaging films into food simulants and foods.

Migration of 4-nonylphenol (NP) from polyvinyl chloride (PVC) films for food packaging into food simulants and foods has been studied in domestic applications such as wrapping of food and reheating in a microwave oven. The migration of NP from the PVC films was determined by high-performance liquid chromatography with electrochemical coulometric-array detection (LC/ED). Twelve PVC films intended for commercial use and ten for domestic applications (total: 22 samples) were analysed. Some of the PVC films (two home-use and ten retail-use) contained NP at concentrations of between 500 and 3300 microg/g. Migration of NP from the films was influenced by the test conditions (n-heptane at 25 degrees C for 60 min, distilled water at 60 degrees C for 30 min and 4% acetic acid at 60 degrees C for 30 min). The amount of NP migrating from the PVC films into n-heptane (0.33-1.6 microg/cm2) was higher than the amount migrating into distilled water or 4% acetic acid (up to 9.7 ng/cm2) for the 11 films in which NP was detected. Up to 0.23% of the NP migrated into distilled water and 4% acetic acid and up to 62.5% into n-heptane. In addition, we investigated NP migration into cooked rice samples wrapped in PVC film. Using spiked samples the method gave an average recovery of 83.7% (n = 5) with a standard deviation of 2.5%. Migration of NP ranged from not detectable (< 1.0 ng/g) to 410.0 ng/g by reheating samples in a microwave oven for 1 min and from not detectable to 76.5 ng/g by keeping samples at room temperature for 30 min.     

Synthesis of titanium dioxide with oxygen vacancy and its visible-light sensitive photocatalytic activity

A novel active carbon reducing process was developed for the synthesis of titanium dioxide with oxygen vacancy. In this process a nanocomposite of hydrolyzed titanium(IV) tetra-isopropoxide and the active carbon was annealed in air. The formation reaction, visible-light absorption, and visible-light sensitive photocatalytic activity of the titanium dioxide with oxygen vacancy samples were investigated using XRD, TG-DTA analyses, FE-SEM, EDS, and measurements of electric conductivity, BET specific surface area and photocatalytic activity. The nonstoichiometric titanium dioxide with oxygen vacancy sample has a rutile structure and its chemical formula can be written as Ti(IV)_1−xTi(III)_xO_(2−x/2)□_x/2, where □ is oxygen vacancy. The oxygen vacancy was introduced into the rutile structure by reducing reaction of the active carbon in a phase transformation process from anatase to rutile. The samples showed visible-light absorption with an absorption edge around 570 nm and high surface visible-light sensitive photocatalytic activity.     

Hydrogen‐bonding interaction between poly(ε‐caprolactone) and low‐molecular‐weight amino compounds

The specific interactions between several low‐molecular‐weight diamino compounds and poly(ε‐caprolactone) (PCL) have been investigated by FT‐IR. It was found that PCL and 3,3′‐diaminodiphenylmethane (3,3′‐DADPM) interact through strong intermolecular hydrogen bonds in the blend. Thermal and mechanical properties of PCL/3,3′‐DADPM blends were investigated by DSC and tensile measurements, respectively. The glass transition temperature of the blend increases while both the melting point and the elongation‐at‐break of the blend decrease with the increase of 3,3′‐DADPM content. Besides 3,3′‐DADPM, several other low‐molecular‐weight compounds containing two amino groups, such as o‐phenylenediamine or 1,6‐diaminohexane, were also added into PCL and the corresponding blend systems were investigated by FT‐IR and DSC. The effect of the chemical structure of the additives on the properties of PCL is discussed. © 2001 Society of Chemical Industry     

Grafted GaAlAs rib waveguides on an InP substrate

Rib waveguides were fabricated on a 1.4 mu m thick GaAlAs epilayer granted on the surface of a semi-insulating InP substrate by epitaxial lift-off. Single-mode waveguides with propagation losses (<7 dB/cm) lower than heteroepitaxially grown counterparts have been achieved. TEM analysis on the GaAlAs/InP interface indicates surface scattering as one of the main loss mechanisms.<>     

Glucokinase is located in secretory granules of pancreatic D-cells

The effects of electrical stimulation, applied to the superior salivatory nucleus (SSN) or the cervical sympathetic nerve, on vascular permeability in nasal mucosa were studied in 16 cats. Plasma extravasation was quantified by using Evans blue. Vascular permeability in the cat nasal mucosa was increased by the electrical stimulation of SSN. Plasma extravasation induced by SSN stimulation was reduced by administration of nitric oxide synthase (NOS) antagonist, N(omega)-nitro-L-arginine methyl ester (L-NAME). Administration of atropine did not affect increased vascular permeability by SSN stimulation. We conclude that neurogenic plasma extravasation in cat nasal mucosa evoked by the parasympathetic nerve is not mediated by cholinergic fibers but rather by nitric oxide.