断路器控制回路断线技术分析及处理方法

分析变电运行中出现断路器＂控制回路断线＂告警信号的原因,并根据实际运行情况提出处理方法。     

努力建设让人民满意的服务型政府

十八届三中全会召开后,我国构建服务型政府的伟大战略进入了一个新的发展阶段。本课题联系当前服务型政府建设实际,进而提出相应的对策思路。     

光学薄膜元器件外观特性机器视觉检测系统

本系统利用工业级摄像头及开发包的机器视觉功能与计算软件编程控制技术相结合,通过与输入控制系统中的标准膜片模板外观品质进行对比,实现高速高效、准确识别检测光学薄膜器件中滤光片的外观缺陷。可在生产线上根据外观品质标准模板中设定的类别进行自动分类装盒。     

无线传感器网络虚MIMO技术研究

在无线传感器网络(WSNs)中,由于节点资源受限,一般不具备多天线,为了充分利用多人多出(MIMO)技术的优点,组成虚MIMO结构成为现实可行的技术.分析了MIMO技术特点,在给出的虚MI-MO结构的基础上,提出了WSNs虚MIMO技术要解决的主要问题,并给出了解决方案.     

1-吡啶-3-[4-(苯基偶氮)苯基]-三氮烯与汞的显色反应及其应用

在Triton X-100存在下的pH 10的Na2B4O7-NaOH缓冲介质中,研究了1-吡淀-3-[4-(苯基偶氮)苯基]-三氮烯(PYPAPT)与汞离子(Hg2 )的显色反应,建立了微量汞的测定方法。Hg2 与PYPAPT形成1∶2的红色络合物,络合物最大吸收波长位于518 nm,表观摩尔吸光系数为1.42×105L.mol-1.cm-1,Hg2 质量浓度在0~0.64 mg/L范围内符合比尔定律。方法用于铅锌矿样中微量汞的测定,RSD小于2.6%,测定结果与AAS法相符。     

From structural ceramics to 2D materials with multi-applications: A review on the development from MAX phases to MXenes

MAX phases (Ti3SiC2, Ti3AlC2, V2AlC, Ti4AlN3, etc.) are layered ternary carbides/nitrides, which are generally processed and researched as structure ceramics. S...     

Dynamic characteristics and stability criterion of rotary galloping gait with an articulated passive spine joint

Based on the simplified planar quadruped model with a passive spine joint, this paper focuses on studying the effect of the spine joint on the dynamic performance and the stability of the rotary galloping gait. The stable, periodic, and symmetric rotary galloping gait is achieved by the particle swarm optimization method without any parameter symmetry for leg motion and without any limitation for spine motion. By analyzing the symmetric pattern of the rotary galloping gait, the stability criterion is derived: the closer to zero is the pitching angle at peak time of the center of mass, the better is the stability of the galloping gait. Then, we study the effect of rear leg touchdown angle and spine stiffness on the stability. Moreover, the unstable rotary galloping gait can be stabilized by adjusting one or more of the touchdown angle, spine stiffness, and leg stiffness. Furthermore, the effect of the spine stiffness on the key kinematic and kinetic properties is also studied for different initial values and mechanical parameters. The presented stability criterion and the achieved dynamic performance analysis results will be instructive for the design and control of the quadruped robot.     

利用城市垃圾资源发展新型墙体工业

使用“秦砖汉瓦”的观念在人们心目中已经根深蒂固,想要打破这种观念,就需要大力进行推广,2004年是全国贯彻实施国家禁用实心粘土砖有关规定的关键一年,发展新型墙体材料工业,特别有效利用城市垃圾工业及工业废弃物生产环保型的新型墙体材料是我国墙体改革工作中一项重要和艰苦的任务。     

Ambient flash sintering of reduced graphene oxide/zirconia composites:Role of reduced graphene oxide

Fabrication of graphene/ceramic composites commonly requires a high-temperature sintering step with long times as well as a vacuum or inert atmosphere,which not only results in property degradation but also significant equipment complexity and manufacturing costs.In this work,the ambient flash sintering behavior of reduced graphene oxide/3 mol% yttria-stabilized ZrO₂(rGO/3 YSZ) composites utilizing rGO as both a composite component and a conductive additive is reported.When the sintering condition is carefully optimized,a dense and conductive composite can be achieved at room temperature and in the air within 20 s.The role of the rGO in the FS of the rGO/3 YSZ composites is elucidated,especially with the assistance of a separate investigation on the thermal runaway behavior of the rGO.The work suggests a promising fabrication route for rGO/ceramic composites where the vacuum and furnace are not needed,which is of interest in terms of simplifying the fabrication equipment for energy and cost savings.     

基于DSP的数字化点焊智能恒流控制系统研究

随着电阻点焊技术的广泛应用,对焊接控制的稳定性、实时性和精确性提出了更高要求.设计了以TMS320C2812为核心的点焊智能控制器.所设计的控制系统由硬件和软件两部分组成,硬件部分主要包括主控制器和辅助电路,软件系统采用模块化设计,采取带白调整函数的模糊规则控制策略实现恒流控制.实验证明,控制系统达到了很好的恒流控制效果,完全满足设计与实际使用要求.