Vacuum impregnation of chitosan‐based edible coating in minimally processed pumpkin

The goal of this research was to evaluate the use of vacuum impregnation (VI) and soaking techniques (ST) in the application of edible coatings of chitosan and chitosan + lauric acid to minimally processed pumpkins (MPP). The vacuum impregnation method led to greater component incorporation (5.9% and 1.75%, respectively) in the pumpkins when compared to soaking and consequently the formation of more uniform, thicker coatings (25.6 and 22.3 μm, respectively). However, VI caused greater changes in pH, acidity, colour and firmness. Relating to water content and carotenoid content, noncoated pumpkins presented greater losses during the storage period, regardless of impregnation method. The pumpkins with edible coatings, regardless of method, presented lower numbers of psychrotrophic micro‐organisms and coliforms during the storage period. Therefore, soaking was considered the best method for the application of chitosan‐based edible coatings to minimally processed pumpkins, as it led to smaller changes in the properties of the product.     

Tribocorrosion and corrosion behavior of stainless steel coated with DLC films in ethanol with different concentrations of water

There has been a recent increase in both the production and consumption of ethanol due to the numerous environmental advantages that it offers, such as the fact that it can be produced from a variety of renewable materials, for instance corn and cellulose, or it can be obtained from sugarcane bagasse and biomass (2nd and 3rd generation ethanol). The result of this is that nowadays ethanol is widely seen as the dominant biofuel – or as a blend component in gasoline or pure fuel - in many countries.However, one disadvantage of the use of ethanol is the high corrosive behavior that occurs when its hygroscopic properties are exposed to a large number of materials. Xiaoyuan Lou and Preet Singh showed that the increase of water concentration in ethanol induces pitting and metal loss. Diamond-Like Carbon (DLC) films may be a solution to this problem due to the fact that they can be deposited inside tubes, offer good protection levels against corrosion, and reduce the friction coefficient and wear.This paper shows the tribocorrosion and corrosion studies of DLC films deposited on stainless steel grade 304 (SS304) substrates in order to gauge its appropriateness usage in the construction of pipelines and fuel storage tanks. The surface morphology was analyzed before and after 14 days of immersion. The tribocorrosion, friction coefficient, and wear rate were studied in ethanol to see the effects of water concentration. The films showed good adherence to the substrates. Corrosion and tribocorrosion results showed that for bare Stainless Steel 304 the increase of the water content increases the corrosion and the friction coefficient. DLC coated samples presented few points of delamination, and the friction coefficient and open circuit potentials were very low compared with the bare sample which was water concentration independent.     

Identification of Phenylpyrazolone Dimers as a New Class of Anti-Trypanosoma cruzi Agents

Chagas disease is becoming a worldwide problem; it is currently estimated that over six million people are infected. The two drugs in current use, benznidazole and nifurtimox, require long treatment regimens, show limited efficacy in the chronic phase of infection, and are known to cause adverse effects. Phenotypic screening of an in-house library led to the identification of 2,2′-methylenebis(5-(4-bromophenyl)-4,4-dimethyl-2,4-dihydro-3H-pyrazol-3-one), a phenyldihydropyrazolone dimer, which shows an in vitro pIC₅₀ value of 5.4 against Trypanosoma cruzi. Initial optimization was done by varying substituents of the phenyl ring, after which attempts were made to replace the phenyl ring. Finally, the linker between the dimer units was varied, ultimately leading to 2,2′-methylenebis(5-(3-bromo-4-methoxyphenyl)-4,4-dimethyl-2,4-dihydro-3H-pyrazol-3-one (NPD-0228) as the most potent analogue. NPD-0228 has an in vitro pIC₅₀ value of 6.4 against intracellular amastigotes of T. cruzi and no apparent toxicity against the human MRC-5 cell line and murine cardiac cells.     

Azaaurones as Potent Antimycobacterial Agents Active against MDR- and XDR-TB

Herein we report the screening of a small library of aurones and their isosteric counterparts, azaaurones and N-acetylazaaurones, against Mycobacterium tuberculosis. Aurones were found to be inactive at 20 μm , whereas azaaurones and N-acetylazaaurones emerged as the most potent compounds, with nine derivatives displaying MIC₉₉ values ranging from 0.4 to 2.0 μm . In addition, several N-acetylazaaurones were found to be active against multidrug-resistant (MDR) and extensively drug-resistant (XDR) clinical M. tuberculosis isolates. The antimycobacterial mechanism of action of these compounds remains to be determined; however, a preliminary mechanistic study confirmed that they do not inhibit the mycobacterial cytochrome bc1 complex. Additionally, microsomal metabolic stability and metabolite identification studies revealed that N-acetylazaaurones are deacetylated to their azaaurone counterparts. Overall, these results demonstrate that azaaurones and their N-acetyl counterparts represent a new entry in the toolbox of chemotypes capable of inhibiting M. tuberculosis growth.     

Low-cost and high-performance 3D printed YBCO superconductors

High-performance YBCO 123 (YBa₂Cu₃O_7-x) bulk superconductor samples were produced using the 3D printing paste-extrusion technique. The YBCO powder obtained after sintering a pre-mixture of Y₂O₃, BaCO₃ and CuO powders at 950 °C was used in the formulation of pastes for extrusion in a 3D freeform printer. The 3D samples printed from pastes containing the pre-mixture powders were sintered, while those produced using the YBCO powder were not. X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and Raman analysis all confirmed the YBCO phase after sintering, both in the powder and in the samples made with the pre-mixture. Scanning electron microscopy (SEM) images revealed powder grains of heterogeneous size and geometry, as well as grain aggregation, in the sintered samples. Superconducting quantum interference device (SQUID) measurements taken within a fixed magnetic range revealed that the printed pieces have a typical magnetization temperature of 92 K, reaching ?1.43 emu/g and ?1.59 emu/g respectively a zero-field-cooled magnetization (ZFC) for sintered and non-sintered printed samples.     

Development of a Topical Insulin Polymeric Nanoformulation for Skin Burn Regeneration: An Experimental Approach

Insulin is a peptide hormone with many physiological functions, besides its use in diabetes treatment. An important role of insulin is related to the wound healing process—however, insulin itself is too sensitive to the external environment requiring the protective of a nanocarrier. Polymer-based nanoparticles can protect, deliver, and retain the protein in the target area. This study aims to produce and characterize a topical treatment for wound healing consisting of insulin-loaded poly-DL-lactide/glycolide (PLGA) nanoparticles. Insulin-loaded nanoparticles present a mean size of approximately 500 nm and neutral surface charge. Spherical shaped nanoparticles are observed by scanning electron microscopy and confirmed by atomic force microscopy. SDS-PAGE and circular dichroism analysis demonstrated that insulin preserved its integrity and secondary structure after the encapsulation process. In vitro release studies suggested a controlled release profile. Safety of the formulation was confirmed using cell lines, and cell viability was concentration and time-dependent. Preliminary safety in vivo assays also revealed promising results.