Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate

The paper presents investigation of how the usage of bottom ash (BA), granulated blast furnace slag (GBFS), and combination of both of these materials as fine aggregate in concrete affects the concrete durability. To assess durability characteristics of concrete, durability tests were conducted and the results were evaluated comparing with reference concrete. Three series concrete were produced. GBFS, BA and GBFS+BA are replaced the 3–7 mm-sized aggregate. Five test groups were constituted with the replacement percentages as 10%, 20%, 30%, 40% and 50% in each series. These by-products were used as non-ground form in the concrete. Durability properties of the concretes were compared in order to study the possible advantages of different replacement ratios. According to results, GBFS and BA affects some durability properties of concrete positively in case of it is used as fine aggregate. Resistance to high temperature and surface abrasion are positively affected properties. Capillarity, drying-wetting and freezing-thawing resistance of the concrete can be accepted to some extent. Properties of by-products and its replacement ratio are controlling the influence level and direction. Comparison of the SEM images and test results show that chemical and physical properties of GBFS and BA are the main factors affecting the concrete durability. It is concluded that it is possible to produce durable concrete by using GBFS and BA as fine aggregate.     

Uncertainty Analysis of Four-Terminal-Pair Capacitance Characterization up 30 MHz

The Impedance Group Laboratories of National Metrology Institute of Turkey previously developed a new method for the characterization of Agilent 16380A-type four-terminal-pair air dielectric capacitance standards ranged from 1 to 1,000 pF up to 30 MHz. This method is based on obtaining all resonance frequencies of standard capacitors using a vector network analyzer in order to calculate inductive residual parameters of the standards. As a continuation of the study, this paper gives a detailed uncertainty analysis for the method.     

A novel automatic suspicious mass regions identification using Havrda & Charvat entropy and Otsu's N thresholding

Mass detection is a very important process for breast cancer diagnosis and computer aided systems. It can be very complex when the mass is small or invisible because of dense breast tissue. Therefore, the extraction of suspicious mass region can be very challenging. This paper proposes a novel segmentation algorithm to identify mass candidate regions in mammograms. The proposed system includes three parts: breast region and pectoral muscle segmentation, image enhancement and suspicious mass regions identification. The first two parts have been examined in previous studies. In this study, we focused on suspicious mass regions identification using a combination of Havrda & Charvat entropy method and Otsu's N thresholding method. An open access Mammographic Image Analysis Society (MIAS) database, which contains 59 masses, was used for the study. The proposed system obtained a 93% sensitivity rate for suspicious mass regions identification in 56 abnormal and 40 normal images.     

Experimental investigation of drying shrinkage cracking of composite mortars incorporating crushed tile fine aggregate

Drying shrinkage is generally classified as an important hardened concrete property. It expresses the strain occurring in hardened concrete due to the loss of water. During the drying process, free and absorbed water is lost from the concrete. When the drying shrinkage is restrained, cracks can occur, depending on the internal stresses in the concrete. The ingress of deleterious materials through these cracks can cause decrease in the compressive strength and the durability of concrete. In this study, being as a fine aggregate in mortars, crushed tile (CT) effect on drying shrinkage and drying shrinkage cracking is investigated. Thus, compressive and flexural strength, modulus of elasticity, and free and restrained drying shrinkage tests are conducted on mortar specimens produced with and without crushed tile fine aggregate. The ring test has been used in order to investigate the cracks induced by restrained drying shrinkage. In this way, free drying shrinkage strain, along with the number and development of drying shrinkage cracks, of the crushed tile fine aggregate mortar composites are quantified and observed.     

Electrochemical impedance spectroscopy and morphological analyses of pyrrole, phenylpyrrole and methoxyphenylpyrrole on carbon fiber microelectrodes

In this study, N-pyrrole (Py), N-phenylpyrrole (PhPy), and 1[4-methoxyphenyl]-1H-pyrrole (MPhPy) homopolymers were synthesized electrochemically onto carbon fiber microelectrodes (CFMEs). The influences of the substituent effect on electrochemical impedance spectroscopy (EIS) were studied comparatively. All the monomers were electrodeposited in 0.05 M tetraethyl ammonium perchlorate (TEAP)/dichloromethane (CH₂Cl₂) solution and characterized by cyclic voltammetry (CV), Fourier transform infrared reflectance spectrophotometry (FTIR-ATR), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The morphological study reveals that the polymers were deposited as a continuous and well adhered film to surface of the CFME. An equivalent electrical circuit for three different monomers on CFMEs was proposed and experimental data were simulated to obtain the numerical values of circuit components. All results support the high quality film deposition that resulted in desired electronic properties due to the electron donating behaviors of substituent group of phenyl and methoxy.     

ENZYMATIC HYDROLYSIS OF STARCH BY USING A SONIFIER

In the present study, the ultrasonication method was used to investigate the effect of ultrasonic energy on the hydrolysis of corn, rice, and wheat starch by using the alpha-amylase enzymes produced by Bacillus species and Bacillus licheniformis. The effects of sonifier operation variables such as duty cycle and acoustic power rate on the stability of alpha-amylase enzymes and hydrolysis degrees of three types of starches were investigated at a temperature of 40°C and pH 6.5. To determine the effect of temperature with sonication on the hydrolysis process, wheat starch hydrolysis experiments were also carried out at a temperature of 50°C. Then, the relation between duty cycle and enzyme stability during hydrolysis for each enzyme at 50°C was expressed by a zero-order inactivation model.     

Fractionation of Caseins by Anion-exchange Chromatography Using Food-grade Buffers

: Caseins prepared by microfiltration of bovine skim milk were fractionated using anion‐exchange chromatography. Laser densitometry of electrophoresis gels was shown to be sufficiently quantitative to perform accurate mass balance calculations detailing the fate of each casein fraction. L‐cysteine was successfully used as a reducing agent instead of traditional toxic agents, such as dithiothreitol or β‐mercaptoethanol, enabling development of the first food‐grade buffer system for casein fractionation. More salt was required for elution of the casein fractions having a greater charge: α_s‐casein > β‐casein > κ‐casein. Increasing flow rate decreased the extent of separation. Use of smaller beads was suggested as a method to maintain separation at increased flow rate.