盾构隧道施工物料无人运输发展现状及关键技术

盾构隧道施工物料无人运输有助于提升运输效率、降低运输成本、减少运输安全事故率。与公路汽车无人驾驶、港口车辆无人驾驶、轨道交通无人驾驶等逐步成熟的无人驾驶技术不同，在隧道场景下实施施工物料无人运输存在运输物料种类繁多、运输调度困难、地下定位信号拒止、狭窄车道频繁会车、行车路面工况复杂、地上地下联动响应慢等诸多挑战。从实现盾构隧道施工物料无人运输的关键问题分析入手，综述当前盾构隧道施工物料运输方式、运输需求、无人运输发展现状及存在的挑战，提出盾构隧道施工物料无人运输的五大关键技术：多种类物料智能货控能效管理技术，无人化垂直装卸门机控制技术，多传感器融合同步定位与地图构建技术，隧道复杂环境路径规划与自主避障技术，隧-地一体化联动响应的高可靠性无线通信技术。     

Ferulic acid and EGCG alter the structural characteristics of ovalbumin and its application in mineral loading

This study aims to fabricate mineral-loading nanocarriers using natural materials. The interaction patterns between ovalbumin (OVA) and four water-soluble polyphenols, namely ferulic acid (FA), (-)-Epigallo-catechin 3-gallate (EGCG), gallic acid (GA) and epicatechin (EC), were investigated. Results showed that the optimised conditions for preparing stable OVA–polyphenol complexes are at the OVA–polyphenol ratio of 4:1 at pH 6, under which OVA–FA and OVA–EGCG showed the highest stability and mineral-loading capacity among four OVA–polyphenol complexes. The fluorescence results indicated that the addition of EGCG and FA induced a significant fluorescence quenching to OVA. The interaction between OVA and polyphenols involved hydrogen bonding, hydrophobic interaction and electrostatic interaction. Fourier transform infrared spectroscopy (FTIR) analysis suggested that both FA and EGCG enhanced the stability and orderliness of the structure of OVA. The transmission electron microscopy images also exhibited the spherical structure of OVA after the addition of FA and EGCG. Furthermore, scanning electron microscope–energy dispersive X-ray spectrum results suggested that OVA–FA and OVA–EGCG complexes were better mineral carriers than OVA–GA and OVA–EC. This study may serve as the theoretical support for the promising application of OVA in the fabrication of mineral-loading nanocarriers in functional food and pharmaceutic.     

Methods and mechanisms for uniformly refining deformed mixed and coarse grains inside a solution-treated Ni-based superalloy by two-stage heat treatment

The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate some δ phases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT tem-perature is 980℃.The phenomenon attributes to the uneven distribution of δ phase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number of δ phases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with few δ phases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prereq-uisite to precipitate even-distributed δ phase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation around δ phase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).     

核临界事故报警系统布置分析方法研究

本文阐述了布置核临界事故报警系统的意义和原则,分析了核临界事故可能发生的机理,初步建立了一套核临界事故情景假设分析方法。研究了最小临界事故源项计算方法以及三维剂量场分布计数的方法,采用各设备最小临界事故剂量场分布最小值等高线图的方法来从众多剂量场分布图中优化选取合适的核临界事故报警系统布置点位,以确保其可以覆盖到每个具有核临界事故风险的设备,并对核临界事故报警系统探头类型选择的原则和方法进行了分析。     

Compact CubeSat Gamma-ray detector for GRID mission

Nuclear Science and Techniques - The physical design for a novel low-energy compact-storage-ring-based extreme ultraviolet (EUV) light source was systemically studied. The design process considers...     

Synthesis of Hollow Three-Dimensional Channels LiNi_(0.5)Mn_(1.5)O_4 Microsphere by PEO Soft Template Assisted with Solvothermal Method

A appropriate size with three-dimension(3 D) channels for lithium diffusion plays an important role in constructing highperforming LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode materials, as it can not only reduce the transport path of lithium ions and electrons, but also reduce the side effects and withstand the structural strain in the process of repetitive Li~+ intercalation/deintercalation. In this work, an e fficient method for designing the hollow LNMO microsphere with 3 D channels structure by using polyethylene oxide(PEO) as soft template agent assisted solvothermal method is proposed. Experimental results indicate that PEO can make the reagents mingle evenly and nucleate slowly in the solvothermal process, thus obtaining a homogeneous distribution of carbonate precursors. In the final LNMO products, the hollow 3 D channels structure obtained by the decomposition of PEO and carbonate precursor in the calcination can provide abundant electroactive zones and electron/ion transport paths during the charge/discharge process, which benefits to improve the cycling performance and rate capability. The LNMO prepared by adding 1 g PEO possesses the most outstanding electrochemical performance, which presented an excellent discharge capacity of 143.1 mAh g~(-1) at 0.1 C and with a capacity retention of 92.2% after 100 cycles at 1 C. The superior performance attributed to the 3 D channels structure of hollow microspheres, which provide uninterrupted conductive systems and therefore achieve the stable transfer for electron/ion.     

UO2-(Zr0.8Ca0.2)O1.8面心立方固溶体微球制备工艺研究

为研制出耐辐照的新型单相陶瓷燃料，采用溶胶-凝胶法，通过复合溶胶配制、分散胶凝、洗涤、干燥煅烧与烧结过程，开展了UO2-(Zr0.8Ca0.2)O1.8燃料微球制备工艺研究，制备出铀摩尔分数含量分别为30mol%、50mol%、70mol%的UO2-(Zr0.8Ca0.2)O1.8燃料微球样品。在对工艺过程进行分析的基础上，通过实验确定了工艺参数。采用X射线衍射（XRD）对3种燃料微球样品进行分析，分析结果表明:铀摩尔分数含量分别为30mol%、50mol%、70mol%的UO2-(Zr0.8Ca0.2)O1.8燃料微球样品均为面心立方（FCC）固溶体结构。      

基于简单开式布雷顿循环的热管反应堆系统功率质量比影响因素初步探索

基于简单开式布雷顿循环的热管反应堆系统具有结构简单、固有安全、放射性泄漏风险低等特点，是小型可移动反应堆的潜在优势技术选项，其功率质量比是评价总体方案先进性的重要指标。本文以5 MW热管反应堆为研究对象，建立包含热管反应堆与开式布雷顿发电装置的方案功率质量比评估模型，对多种关键参数对总体指标的影响规律进行了探索。研究表明功率质量比随热传导途径上温差增大而先提高后降低，最优值则与堆芯基体最高温度限值正相关。在给定温度限值条件下，热管反应堆电源系统内热量传输途径上温差设计是热管反应堆优化设计的关键因素。未来可进一步细化模型，对压气机、涡轮、热管等进行更详细建模，提高模型准确程度。