Smart Edge Computing for 5 g/6 g Satellite IOT for Reducing Inter Transmission Delay

Mobile Networks and Applications - 5G/6G communication are first generation high speed wireless communication network which integrates the aerial data, terrestrial data and maritime data via...     

Structure and bandgap determination of InN grown by RP-MOCVD

InN thin films are grown on sapphire substrates by remote plasma-assisted metal organic chemical vapor deposition while varying the indium pulse length and substrate temperature. The effects of the indium pulse length and temperature on the structural, morphological, electronic, and optical properties of the thin films are studied. The structural parameters are determined by X-ray diffraction and X-ray photoelectron spectroscopy and the effects of incorporating oxygen atoms in the structure is described. The N K-edge X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) measurements are used to determine the band gap and it is found to be 1.80?±?0.25 eV for all samples. A complementary measurement namely, X-ray excited optical luminescence measurement is performed to confirm the band gap value obtained from XAS and XES measurements. O K-edge XAS measurements are performed to determine the presence of oxygen impurities in the samples. Meanwhile, we carry out the density functional theory calculations for Wurtzite InN, hypothetical Wurtzite-type InO_0.5N_0.5, and InO_0.0625N_0.9375 structures. We find that the measured N-edge spectra agree well with our Wurtzite InN calculations and the measured O K-edge spectra agree better with hypothetical Wurtzite-type InO_0.0625N_0.9375 than Wurtzite-type InO_0.5N_0.5.

     

An Efficient Digital Confidentiality Scheme Based on Commutative Chaotic Polynomial

Multimedia Tools and Applications - One of the most critical aspects of this technologically progressive era is the propagation of information through an unsecured communication channel. The...     

Diluted chemical bath deposition of CdZnS as prospective buffer layer in CIGS solar cell

In this study, dilute chemical bath deposition technique has been used to deposit CdZnS thin films on soda-lime glass substrates. The structural, morphological, optoelectronic properties of as-grown films have been investigated as a function of different Zn²⁺ precursor concentrations. The X-ray diffractogram of CdS thin-film reveals a peak corresponding to (002) plane with wurtzite structure, and the peak shift has been observed with the increase of the Zn²⁺ concentration upon formation of CdZnS thin film. From morphological studies, it has been revealed that the diluted chemical bath deposition technique provides homogeneous distribution of film on the substrate even at a lower concentration of Zn²⁺. Optical characterization has shown that the transparency of the film is influenced by Zn²⁺ concentration and when the Zn²⁺ concentration is varied from 0 M to 0.0256 M, bandgap values of resulting films range from 2.42 eV to 3.90 eV while. Furthermore, electrical properties have shown that with increasing zinc concentration the resistivity of the film increases. Finally, numerical simulation validates and suggests that CdZnS buffer layer with composition of 0.0032 M Zn²⁺ concentration would be a promising candidate in CIGS solar cell.     

In-vitro evaluation of wollastonite nanopowder produced by a facile process using cheap precursors for biomedical applications

Wollastonite nanopowder (β-CaSiO₃) is the most nanoceramic powder that is most frequently applied in biomedical applications due to its good bioactivity and biocompatibility. Although the preparation of wollastonite in a solid-state is distinguished as a simple and cheap method with large-scale production, it requires high temperatures (=1400 °C) and consumes quite a long time. The wet methods are considered the best when it comes to preparing the wollastonite nanopowders. However, it has some drawbacks such as its extravagant raw materials and its shorting in preparation which inhibits successful coverage for large-scale production. Herein facile, one-pot modified co-precipitation approach with an easy procedure, shorter reaction time, and in-expensive precursor sodium meta-silicate-pentahydrate and CaCO₃ has been utilized for large-scale production of wollastonite nano-powders (76–150 nm). The precipitated product was calcined at different temperatures (800, 900, 1000, and 1100 °C). The phase composition and microstructure of the calcined powders were investigated. They were analyzed by XRD, FTIR, FESEM, and HRTEM. The in-vitro bioactivities of the calcined powders at 1000 &1100 °C were investigated by analyzing their abilities to form apatite on their surface after 21 days in SBF. The apatite mineralization of the powder surfaces was examined through FESEM, EDX, and Raman spectra. The results show that a single-phase wollastonite got formed at all calcined temperatures with a unique silkworm texture. SBF in-vitro test states the formation of HA on the powder surface. Therefore, these powders are expected to be valuable and promising for biomedical applications such as coating and bio cement.     

Ultra-Robust Flexible Electronics by Laser-Driven Polymer-Nanomaterials Integration

Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications.     

Design of an Electromagnetic Frequency Tunned Antenna for Mobile Communications

Wireless Personal Communications - Current mobile communications technology relies heavily on efficient design of antennas, where the operational characteristics of the wireless communication...     

ZnIn2S4/g-C3N4 Nanocomposite for Proficient Elimination of Hg (II) under Visible Light

Journal of Inorganic and Organometallic Polymers and Materials - The present work offers beneficial method for Hg (II) elimination from aqueous solution. ZnIn2S4/g-C3N4 nanocomposites were...     

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Porous bony scaffolds are utilized to manage the growth and migration of cells from adjacent tissues to a defective position. In the current investigation, the effect of titanium oxide (TiO₂) nanoparticles on mechanical and physical properties of porous bony implants made of polymeric polycaprolactone (PCL) is studied. The bio-nanocomposite scaffolds are prepared with composition of nanocrystalline hydroxyapatite (HA) and TiO₂ powder using the freeze-drying technique for different weight fractions of TiO₂ (0 wt%, 5 wt%, 10 wt%, and 15 wt%). In order to identify the microstructure and morphology of the fabricated porous bio-nanocomposites, the X-ray diffraction (XRD), atomic force microscope (AFM) and scanning electron microscopy (SEM) are employed. Also, the biocompatibility and biodegradability of the manufactured scaffolds are examined by placing them in a simulated body fluid (SBF) for 21 days, their weight and pH changes are measured. The rate of degradation of the PCL-HA scaffold can be controlled by varying the percentage of its constituent components. Due to an increasing growth and activity of bone cells and the apatite formation on the free surface of the fabricated bio-nanocomposite implants as well as their reasonable mechanical properties, they have the potential to be used as a bone substitute. Additionally, with the aid of the experimentally extracted mechanical properties of the scaffolds, the vibrational characteristics of a beam-type implant made of the proposed porous bio-nanocomposites are explored. The results obtained from SEM image indicate that the scaffolds produced by the employed method have high total porosity (70%–85%) and effective porosity. The pore size is obtained between 60 and 200 μm, which is desirable for the growth and propagation of bone cells. Also, it is revealed that the addition of TiO₂ nanoparticles leads to reduce the rate of dissolution of the fabricated bio-nanocomposite scaffolds.     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.