The measurement of solar array discharges in a simulated spaceenvironment

A spacecraft in a plasma builds up charge on all the dielectric surfaces and interfaces. Once the net charge exceeds the dielectric breakdown of the material, a discharge occurs. One of the more susceptible pieces of equipment is the antenna/receiver system. The radiated E-field may be strong enough to create an ambiguous signal which may be misinterpreted by the system electronics and cause a system malfunction. A technique is developed to monitor the radiated E-field of materials discharging in an electron environment, using vacuum chambers for measuring the material discharges which are made of highly reflective materials. These chambers affect the radiated E-field due to multiple reflections from the walls. The technique developed defines a method for correcting the effects caused by the measurement facilities. The methodology is: monitor the radiated E-field with a broadband dipole antenna, and digitize the radiated signal as a function of time. Determine the frequency response of the radiated E-field using an FFT algorithm. Measure the transmission and reflection characteristics of the two-port network inside the measurement chamber, and determine the impedance network from the measured E-parameters across the frequency band of interest. Transform the measured E-field frequency response through the impedance network to obtain the frequency response of the actual radiated discharge current. Find the inverse FFT of this response to obtain the actual radiated discharge current response. This technique aids in the prediction of the E-field coupling into receive antennas on-board actual satellites     

Comparison of Lactic Acid Productivities at High Substrate Conversions in a Continuous Two-stage Fermenter With Cell Recycle Using Different Kinetic Models

The steady-state performance of a two-stage recycle fermenter with two different types (I and II) of configurations for staging was investigated numerically for the continuous production of lactic acid. In Type I the bleed broth withdrawn from the first stage is supplied to the second fermenter, and in Type II both filtrate and bleed broth from the first stage are introduced to the second stage. Using four different kinetic models taken from the literature, the effects of operating parameters on the overall lactic acid productivities and the overall substrate conversions are examined. At moderate conversions, productivities for Type I operation are found to be higher than those for Type II and for the single-stage system. In the case of high conversions close to complete consumption, Type II operation is more efficient than the Type I and single-stage systems. For 99% conversion and 40 kg m^-3 substrate feed concentration, productivities for Type II are predicted to be 14-74% higher compared to those for the single-stage system at the same bleed ratios.     

The accuracy of self-monitoring and its relationship to self-focused attention in dysphoria and clinical depression.

The accuracy with which dysphoric (Study 1) and clinically depressed (Study 2) individuals make self-regulatory judgments about their own performance in the absence of external feedback and the extent to which this relates to trait self-focused attention (SFA) were examined. Relative to objective criteria, both dysphoric and depressed participants showed a positive judgment bias, overestimating the number of trials they had performed correctly. Relative to control participants, the dysphoric and depressed groups showed a reduction in the extent of this positive bias in that they judged error trials more accurately and correct trials less accurately. Although the dysphoric and depressed groups both reported elevated trait SFA, this did not correlate significantly with accuracy of self-judgment on the performance-monitoring task. Implications for self-regulation models of depression are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of age and schooling on the acquisition of elementary quantitative skills.

The influence of school- and age-related variables was examined separately on 2 tasks involving elementary quantitative skills: conservation of number and mental addition. Performance on these tasks was compared by using a cutoff design with 3 groups of kindergarten and Grade 1 children who differed in age but not amount of schooling (grade), in schooling but not age, or in both age and schooling. The effects of age and schooling were distinct. On conservation of number, performance improved as a function of age but not schooling. On mental arithmetic, accuracy improved with schooling rather than age but children's use of various solution procedures (e.g., retrieval, counting) was not influenced by schooling. Thus, in the domain of elementary mathematical skills, the influence of schooling can be very specific, and age-related variables other than schooling play an important role in the development of elementary mathematical skills. Results illustrate the utility of the cutoff design for investigating instructional and developmental influences on cognitive development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

SURFACE ROUGHNESS EFFECTS ONMICROPARTICLE ADHESION

A new self-consistent model is developed to treat the static contact of a microparticle with a flat barrier in the presence of molecular adhesion and surface roughness. Separation between their mean datum planes is modeled considering the elastic deformation of the microparticle and surface. The contact pressure is computed from the Lennard-Jones law following the Derjaguin approximation. The elastic deflection of the mean datum plane is calculated from the effective pressure by the half-space elastic theory. Roughness is modeled by introducing a Gaussian distribution to the gap between the surfaces. An effective pressure is defined as the statistical average of the contact pressure over the roughness heights. A solution satisfying all of the above conditions gives a self-consistent method of modeling adhesion between the microparticle and the flat barrier. Using collocation methods the equations are discretized as a large system of nonlinear algebraic equations. A continuation method is used to find the multiple numerical solutions for the mean separation and the effective contact pressure. Finally, adhesive contacts of both smooth and rough surfaces are simulated in a comparative manner to elucidate the features of surface roughness in the presence of molecular adhesion. The standard deviation of the Gaussian distribution is used as a parameter to assess the effects of roughness on the pull-off force. It is shown that increasing surface roughness significantly reduces the pull-off force and decreases the tendency for the microsphere to snap-on and snap-off.     

Elastic-plastic thermal stresses and deformation of short-fibre composites

A micromechanics model is proposed to analyse residual stresses and deformations that develop in short-fibre composites upon an applied uniform temperature change. The model is based on Eshelby's equivalent inclusion method and treats the interaction among fibres at finite volume fractions through the Mori-Tanaka mean field theory. The model treats the matrix as an elastic/plastic material while the fibre is elastic and is able to account for the effects of the composite microgeometry. To this end, the effects of misoriented short fibres, the orientation of which is described by a density distribution function, are considered. Numerical results obtained from the proposed model indicate that the misorientation of short fibres has a significant effect on both the stress and deformation behaviour of short-fibre composites.     

Characterization of platelet-activating factor synthesis in glomerular endothelial cell lines

Platelet-activating factor synthesis in two transformed lines of glomerular endothelial cells was characterized and contrasted with platelet-activating factor production in macrovascular-derived endothelial cells as well as with glomerular cells of mesenchymal origin. Platelet-activating factor synthesis was assessed in intact cells and in cell-free preparations. Glomerular endothelial cells constitutively synthesize bio-active alkyl-PAF, and this basal activity can be chronically augmented by various inflammatory and thrombotic agents. In contrast, thrombin-mediated platelet-activating factor formation in bovine pulmonary aortic endothelial cells as well as in glomerular mesangial cells is acute and transient. The potential role of anti-inflammatory prostanoids to function as negative feedback modulators of thrombin- or endothelin-mediated platelet-activating factor synthesis was also investigated, as the synthesis of platelet-activating factor is often associated with the formation of these prostanoids. Indomethacin augmented receptor-mediated platelet-activating factor synthesis while prostanoids of the E and I series reduced agonist-stimulated PAF synthesis. In summary, the unique capacity of glomerular endothelial cells to respond to inflammatory stimuli with sustained platelet-activating factor synthesis is a clear indication of this cell's pivotal role in augmenting the inflammatory response in the limited environment of the glomerulus.     

A Practical Cross-Layer Mechanism For Fairness in 802.11 Networks

Many companies, organizations and communities are providing wireless hotspots that provide networking access using 802.11b wireless networks. Since wireless networks are more sensitive to variations in bandwidth and environmental interference than wired networks, most networks support a number of transmission rates that have different error and bandwidth properties. Access points can communicate with multiple clients running at different rates, but this leads to unfair bandwidth allocation. If an access point communicates with a mix of clients using both 1 Mb/s and 11 Mb/s transmission rates, the faster clients are effectively throttled to 1 Mb/s as well. This happens because the 802.11 MAC protocol approximate “station fairness”, with each station given an equal chance to access the media. We provide a solution to provide “rate proportional fairness”, where the 11 Mb/s stations receive more bandwidth than the 1 Mb/s stations. Unlike previous solutions to this problem, our mechanism is easy to implement, works with common operating systems and requires no change to the MAC protocol or the stations. Joseph Dunn received an M.S. in computer science from the University of Colorado at Boulder in 2003, and B. S. in coputer science and mathematics from the University of Arizona in 2001. His research interests are in the general area of computer systems, primarily focusing on security and scalability in distributed systems. He is currently working on his Ph.D. in computer science from the University of Colorado at Boulder. Michael Neufeld received a Ph.D. in Computer Science from the University of Colorado at Boulder in December of 2004, having previously received an M.S. in Computer Science from the University of Colorado at Boulder in 2000 and an A.B. in Computer Science from Princeton University in 1993. His research interests are in the general area of computer system, specifically concentrating on wireless networking, software defind/cognitive radio, and streerable antennas. He is currently a postdoc in the Computer Science department at the University of Calorado at Boulder pursuing research related to software defined radio and new MAC protocols for steerable phase array antennas. Anmol Sheth is a Ph.D. student in Computer Science at the University of Colorado at Boulder. He received his B.S. in Computer Science from the University of Pune, India in 2001. He has been co-leading the development of the MANTIS operating system. He has co-authored three papers include MAC layer protocol design, energy-efficient wireless communication, and adapting communications to mobility. Dirk Grunwald received his Ph.D. from the University of Illinois in 1989 and joined the University of Colorado the same year. His work addresses research and teaching in the broad area of “computer systems”, which includes computer architecture, operating systems, networks, and storage systems. His interests also include issues in pervasive computing, novel computing models, and enjoying the mountains. He is currently an Associate Professor in the Department of Computer Science and in Electrical and Computer Engineering and is also the Director of the Colorado Center for Information Storage. John Bennett is a Professor of Computer Science with a joint appointment in Electrical and Computer Engineering at the University of Colorado at Boulder. He also serves as Associate Dean for Education in the College of Engineering and Applied Science. He joined the CU-Boulder faculty in 2000, after serving on the faculty of Rice University for 11 years. While at Rice, Bennett pioneered a course in engineering design for both engineering and non-engineering students that has been emulated at several universities and high schools. In addition to other teaching awards, Bennett received the Keck Foundation National Award for Engineering Teaching Excellence for his work on this course. Bennett received his Ph.D. in 1988 from the University of Washington. Prior to completing his doctoral studies, he was a U.S. Naval Officer for several years and founded and served as President of Pacific Mountain Research, Inc., where he supervised the design and development of a number of commercial computing systems. Bennett's primary research interests are broadly focused in the area of distributed systems, and more narrowly in distributed information management and distributed robotic macrosensors.     

Phase transformation of calcia-alumina-magnesia fibres produced by inviscid melt spinning

CaO-Al₂O₃-MgO (CAM) ceramic fibre produced via inviscid melt spinning (IMS) was investigated for phase transformation. Differential thermal analysis (DTA) on the as-spun CAM fibre gave two transformation peaks, one for exothermic peak at around 927°C and the other for endothermic one at around 1100°C. In order to identify each phase transformation x-ray diffraction (XRD) analysis was performed on the CAM fibres heat-treated to each phase transformation completion temperature. The exothermic peak was determined to represent crystallization of remaining amorphous phase in the as-spun CAM fibre. The endothermic peak was determined to correspond to transformation of non-equilibrium CaO · Al₂O₃ phase to equilibrium 3CaO· 5Al₂O₃ phase.     

A prospective study of the efficacy of the physician order form for life-sustaining treatment

OBJECTIVES: The Physician Orders for Life-Sustaining Treatment (POLST), a comprehensive, one-page order form, was developed to convey preferences for life-sustaining treatments during transfer from one care site to another. This study examined the extent to which the POLST form ensured that nursing home residents' wishes were honored for Do Not Resuscitate (DNR) and requests for transfer only if comfort measures fail. DESIGN: The study used chart record data to follow prospectively a sample of nursing home residents with the POLST. SETTING: Eight geographically diverse, long-term, adult-care facilities in Oregon in which the POLST was in use. PARTICIPANTS: Nursing home residents (n = 180), who had a POLST recording DNR designation and who indicated a desire for transfer only if comfort measures failed, were followed for 1 year. MEASUREMENTS: For all subjects: treatment and disposition after significant health status changes; orders for narcotics and for provision or limitation of aggressive interventions. For hospitalized subjects: diagnosis, medical interventions, and DNR orders. For those who died: cause and location of death, life-sustaining treatments attempted, and comfort measures provided. RESULTS: No study subject received CPR, ICU care, or ventilator support, and only 2% were hospitalized to extend life. Of the 38 subjects who died during the study year, 63% had an order for narcotics, and only two (5%) died in an acute care hospital. A total of 24 subjects (13%) were hospitalized during the year. Hospitalized subjects' mean length of stay was 4.9 days, and the mean rate of hospitalizations for all subjects was 174 per 1000 resident years. In 85% of all hospitalizations, patients were transferred because the nursing home could not control suffering. In 15% of hospitalizations (n = 4), the transfer was to extend life, overriding POLST orders. CONCLUSIONS: POLST orders regarding CPR in nursing home residents in this study were universally respected. Study subjects received remarkably high levels of comfort care and low rates of transfer for aggressive life-extending treatments.