Introduction

The Journal of Supercomputing -     

Analysis and comparison of machine learning classifiers and deep neural networks techniques for recognition of Farsi handwritten digits

The Journal of Supercomputing - Handwriting recognition remains a challenge in the machine vision field, especially in optical character recognition (OCR). The OCR has various applications such as...     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

X-ray Photoelectron Spectroscopy of Cadmium Tin Oxide Ceramics in As-Fired and Electrochemically Reduced Forms

X-ray photoelectron spectroscopy (XPS) has been employed to investigate the chemical nature of samples of dicadmium stannate (Cd₂SnO₄) in the as-fired, electrochemically reduced, and reoxidized states. The reduction of Cd₂SnO₄ was found to be associated with a dramatic color change from bright yellow to dark green, a phenomenon commonly known as the electrochromic effect. Both quantitative XPS results and binding energy measurements proved that, upon exposure of the reduced ceramic bodies to air, the Sn²⁺ to Sn⁴⁺ transition readily took place to produce the intermediate compound, Cd₂SnO₃ with divalent tin. Prolonged exposure to the atmosphere did not result in further progress of reoxidation extending to monovalent cadmium. However, complete reoxidation of the reduced samples was possible by annealing in air at 350°C for a short period of time, e.g., 3 h, by which the original features of the as-fired state such as color and electrical conductivity were restored. The results also showed that reoxidized samples at high temperature assume the same XPS characteristics as those of as-fired ceramics.     

Modification of glassy carbon electrode with multi-walled carbon nanotubes and iron(III)-porphyrin film: Application to chlorate, bromate and iodate detection

In this study, multi-wall carbon nanotubes (MWCTs) is evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on iron-porphyrin. 5,10,15,20-Tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)P) adsorbed on MWCNTs immobilized on the surface of glassy carbon electrode. Cyclic voltammograms of the Fe(III)P-incorporated-MWCNTs indicate a pair of well-defined and nearly reversible redox couple with surface confined characteristics at wide pH range (2-12). The surface coverage (Γ) and charge transfer rate constant (k_s) of Fe(III)P immobilized on MWCNTs were 7.68 × 10⁻⁹ mol cm⁻² and 1.8 s⁻¹, respectively, indicating high loading ability of MWCNTs for Fe(III)P and great facilitation of the electron transfer between Fe(III)P and carbon nanotubes immobilized on the electrode surface. Modified electrodes exhibit excellent electrocatalytic activity toward reduction of ClO₃⁻, IO₃⁻ and BrO₃⁻ in acidic solutions. The catalytic rate constants for catalytic reduction of bromate, chlorate and iodate were 6.8 × 10³, 7.4 × 10³ and 4.8 × 10² M⁻¹ s⁻¹, respectively. The hydrodynamic amperometry of rotating-modified electrode at constant potential versus reference electrode was used for detection of bromate, chlorate and iodate. The detection limit, linear calibration range and sensitivity for chlorate, bromate and iodate detections were 0.5 μM, 2 μM to 1 mM, 8.4 nA/μM, 0.6 μM, 2 μM to 0.15 mM, 11 nA/μM, and 2.5 μM, 10 μM to 4 mM and 1.5 nA/μM, respectively. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantages of this sensor. The obtained results show promising practical application of the Fe(III)P-MWCNTs-modified electrode as an amperometric sensor for chlorate, iodate and bromate detections.     

An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

Human-centered design of a wearable kinesthetic haptic device for surgical teleoperation

Artificial Life and Robotics - This paper describes the design and performance evaluation of a flexible wearable haptic device that aims to realize full kinesthetic haptic feedback for application...     

A hybrid OBL-based firefly algorithm with symbiotic organisms search algorithm for solving continuous optimization problems

The metaheuristic optimization algorithms are relatively new optimization algorithms introduced to solve optimization problems in recent years. For example, the firefly algorithm (FA) is one of the metaheuristic algorithms inspired by the fireflies' flashing behavior. However, its weakness in terms of exploration and early convergence has been pointed out. In this paper, two approaches were proposed to improve the FA. In the first proposed approach, a new improved opposition-based learning FA (IOFA) method was presented to accelerate the convergence and improve the FA's exploration capability. In the second proposed approach, a symbiotic organisms search (SOS) algorithm improved the exploration and exploitation of the first approach; two new parameters set these two goals, and the second approach was named IOFASOS. The purpose of the second method is that in the process of the SOS algorithm, the whole population is effective in the IOFA method to find solutions in the early stages of implementation, and with each iteration, fewer solutions are affected in the population. The experiments on 24 standard benchmark functions were conducted, and the first proposed approach showed a better performance in the small and medium dimensions and exhibited a relatively moderate performance in the higher dimensions. In contrast, the second proposed approach was better in increasing dimensions. In general, the empirical results showed that the two new approaches outperform other algorithms in most mathematical benchmarking functions. Thus, The IOFASOS model has more efficient solutions.

     

Comparison of two tools for the measurement of interfragmentary movement in femoral neck fractures stabilised by cannulated screws

Achieving stability at the site of femoral neck fracture is an important factor for callus formation in the post-operative period. However, measuring interfragmentary movement in vivo is not currently possible as telemetric screws have not been manufactured for surgical use. Understanding how the implantation of the screws can affect the stability of the fracture allows the surgeon to tailor the procedure to the patient and produce the best possible outcome. Two techniques have been developed that measure interfragmentary movement between fractured surfaces. The first was a FEA model of the proximal femur with screws represented by nodal links. Movement was quantified by the amount of relative motion occurring between paired nodes either side of the fracture. The second was a mechanical compression test of a composite femur that allowed the motion analysis of paired markers on the external surface of the femur. Movement was digitised with markers selected and displacements calculated by transforming the global coordinate system to a local system relative to the fracture plane.