Lifeline systems are vulnerable to two types of hazards arising from potential earthquake sources. These are the hazard of a fault-rupture strike on elements of a lifeline system and the hazard of overstress induced in different elements of the system because of the ground vibration. An optimum design method is presented in this paper for the design of a lifeline system for a maximum accepted probability of failure because of any of the two modes of failure. The method may be used to determine an optimum path between a number of fixed points which represent supply or demand stations in the system. 相似文献
This study extends the PSO-MODSIM model, integrating particle swarm optimization (PSO) algorithm and MODISM river basin decision support system (DSS) to determine optimal basin-scale water allocation, in two aspects. The first is deriving hydrologic state-dependent (conditional) operating rules to better account for drought and high-flow periods, and the second is direct, explicit consideration of sustainability criteria in the model’s formulation to have a better efficiency in basin-scale water allocation. Under conditional operating rules, the operational parameters of reservoir target storage levels and their priority rankings were conditioned on the hydrologic state of the system in a priority-based water allocation scheme. The role of conditional operating rules and policies were evaluated by comparing water shortages associated with objective function values under unconditional and conditional operating rules. Optimal basin-scale water allocation was then evaluated by incorporating reliability, vulnerability, reversibility and equity sustainability indices into the PSO objective function. The extended model was applied for water allocation in the Atrak River Basin, Iran. Results indicated improved distribution of water shortages by about 7.5% using conditional operating rules distinguishing dry, normal and wet hydrologic states. Alternative solutions with nearly identical objective function values were found with sustainability indices included in the model. 相似文献
Methyl tert-butyl ether (MTBE) is a gasoline oxygenate that has become a significant threat to groundwater supplies across the United States. Due to its physiochemical properties it has proven difficult and costly to remove from contaminated sites. This study was conducted to determine whether the alternative oxygenates (AO)—diisopropyl ether (DIPE), ethyltert-butyl ether (ETBE), tert-amyl methyl ether (TAME), tert-butyl alcohol (TBA), and ethanol (EtOH)—present a more efficient and less costly option from a remediation standpoint. Air stripping, carbon adsorption, and ultraviolet/H2O2 and O3/H2O2 advanced oxidation processes were examined at pilot scale to develop design parameters from which technical and economic comparisons were made for each alternative oxygenate versus MTBE. The experimental results showed that the ether AOs—DIPE, TAME, and ETBE—were each more efficiently and more economically treated than MTBE. The alternative alcohol oxygenates—TBA and EtOH—were less efficiently and less economically treated by the processes studied. The paper details the effects of primary process parameters and properties of individual oxygenates on process efficiency. 相似文献
In this work, an analytical equation of state based on statistical mechanical perturbation theory, which was initially developed for normal fluids and can be applied to predict the P–V–T data for saturated liquid alkaline earth metals, is presented. The equation of state is that of Ihm, Song, and Mason, and the temperature-dependent parameters of the equation of state are calculated from a corresponding-states correlation as functions of the reduced temperature. Two scaling constants are sufficient for this purpose, the surface tension and the liquid density at the melting point. The equation of state is used to predict the saturated liquid density of molten alkaline earth metals from the melting point up to 2000 K, for which experimental data exist, within an accuracy of 5%. 相似文献
In this paper, a solution to the optimal power flow (OPF) problem in electrical power networks is presented considering high voltage direct current (HVDC) link. Furthermore, the effect of HVDC link converters on the active and reactive power is evaluated. An objective function is developed for minimizing power loss and improving voltage profile. Gradient-based optimization techniques are not viable due to high number of OPF equations, their complexity and equality and inequality constraints. Hence, an efficient global optimization method is used based on teaching–learning-based optimization (TLBO) algorithm. The performance of the suggested method is evaluated on a 5-bus PJM network and compared with other algorithms such as particle swarm optimization, shuffled frog-leaping algorithm and nonlinear programming. The results are promising and show the effectiveness and robustness of TLBO method.
This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion. 相似文献
The simplest and the most cost-effective way of human milk fat substitute (HMFS) production is formulating of suitable vegetable oils at proper ratios. To do this, the D-optimal mixture design was used to optimize the HMFS formulation. The design included 25 formulations made from refined palm olein (35–55%), soybean oil (5–25%), olive oil (5–20%), virgin coconut oil (5–15%), and fish oil (0–10%). Samples were produced in laboratory and characterized in terms of fatty acid and triacylglycerol (TAG) compositions, free fatty acid content, peroxide value, iodine value, and oxidative stability index (OSI). HMFS samples were also compared with Codex Alimentarius (CA) and Iran National Standards Organization (INSO) standards. Each characteristic of HMFS samples was then expressed as a function of ingredient ratio using regression models. Finally, using numerical optimization, four optimized blends (PB1-PB4) were selected, made in the laboratory (HMFS1-HMFS4), characterized, and compared with CA and INSO standards. The properties of all the optimized blends (except the palmitic acid content of HMFS2 and the monounsaturated fatty acid [MUFA] content of HMFS3) met the standards. HMFS4 showed the highest OSI in Rancimat and the lowest oxidation rate in Schaal oven tests. POL (19.53–21.73%), PPO (20.77–21.73%), OOO (9.11–11.16%), and OPO (8.84–9.46%) were the main (totally about 60%) TAG species found in HMFS samples. In conclusion, the HMFS4 formula (55% palm olein, 13.5% soybean oil, 16% refined olive oil, 15% virgin coconut oil, and 0.5% fish oil) was suggested as the best formula for HMFS production. 相似文献
This paper addresses the modeling of the pressure?Cvolume?Ctemperature (PVT) properties of 14 polymer melts using simplified Yukawa hard-sphere-chain equation of sate (EOS) plus first-order perturbation theory. Three pure-component parameters appeared in the EOS have been determined via the volumetric data. These parameters reflect the segment number, non-bonded segment?Csegment interaction energy, and segment size. Likewise, this study considered chains that interact through a range-parameter of Yukawa potential with l.8. The reliability of the proposed model has been assessed by comparing the results with 1,315 experimental data points over a broad range of pressures and temperatures for which, their measured values were available in the literature. Our calculations on the specific volume of studied liquid polymers reproduce very accurately the experimental PVT data. The overall average absolute deviation of the calculated specific volumes from literature data was found to be 0.89?%. 相似文献
A multi-objective optimal phasor measurement unit placement model using integer linear programming is presented in this article. The proposed model simultaneously optimizes two objectives, i.e., minimization of phasor measurement unit numbers and maximization of measurement redundancy. To calculate the redundancy criteria, the single-line outage and the phasor measurement unit loss are considered simultaneously. A linear formulation is presented for both objective functions. Also herein, to address conflicting attributes and identify Pareto optimal solutions of the multi-objective optimal phasor measurement unit placement problem, a new multi-objective mathematical programming method is proposed. Finally, a new index, i.e., minimum distance to utopia point, is implemented to select the most preferred solution among the available Pareto front based options on the goal to achieve judicious decision makers. Two test systems, i.e., a modified 9-bus and an IEEE 118-bus test systems, are used to illustrate the effectiveness of the proposed framework. 相似文献