Surface properties of muscle protein extracts

The interfacial properties of proteins extracted from muscle using salt solutions of different concentration and for different extraction times were determined by the drop volume method. At a bulk phase concentration of 10(-2) wt%, it appears that the sarcoplasmic-rich fraction of muscle is more surface active than the salt-soluble fraction. The average equilibrium surface pressure at the air-liquid interface was 21·5 mN m(-1) for an aqueous extract and 20·1 mN m(-1) for a 1m KCl-extract. The equilibrium surface pressure decreased from 21·7 mN m(-1) to 19·50mN m(-1) as the extraction time with Weber-Edsall solution increased from 15 min to 48 h.     

Pulsed and cw operation of helium-water vapor laser at 28 microm

The operating characteristics of a water vapor-helium laser working at 28 microm are presented. Comparison is made of power output in continuous and pulsed operation for various gas mixtures and discharge currents for the same laser cavity.     

Hydrolysis of the sarcoplasmic, myofibrillar and connective tissue proteins of lean beef by alcalase and its relationship to whole meat hydrolysis

The enzymic hydrolysis and solubilisation of the three meat protein fractions have been investigated in order to elucidate some aspects of the hydrolysis of whole beef protein. Much of the water-soluble sarcoplasmic protein fraction was insolubilised on heating for 25 min at 60°C. While most of this insoluble protein was easily resolubilised enzymically, some of it remained insoluble after 5 hours' hydrolysis. Solubilisation of connective tissue by Alcalase after a 3 h reaction increased markedly from 23% at 55°C to 99% at 60°C. This explains the high optimum temperature for solubilisation of whole beef by Alcalase. A significant portion of myofibrillar tissue remained insoluble after 3 hours' reaction. indicating that the majority of the insoluble solids remaining after whole meat hydrolysis at 60°C derived from myofibrillar tissue. There was good agreement between an experimental reaction progress curve for whole beef hydrolysis and one estimated from progress curves for hydrolysis of the three meat protein fractions.     

高掺量粉煤灰路面试验研究获得成功

据悉，“十一五”期间六盘水市的煤产量将达到4000万t／年，火电装机容量为1000万KW，粉煤灰排放量将逐步增到1000万t左右。为提高粉煤灰的综合利用率，拟将粉煤灰混凝土用于公路路面工程。     

Synthetic applications of nonmetal catalysts for homogeneous oxidations

Nonmetal oxidation catalysts have gained much attention in recent years. The reason for this surge in activity is 2-fold: On one hand, a number of such catalysts has become readily accessible; on the other hand, such catalysts are quite resistant toward self-oxidation and compatible under aerobic and aqueous reaction conditions. In this review, we have focused on five nonmetal catalytic systems which have attained prominence in the oxidation field in view of their efficacy and their potential for future development; stoichiometric cases have been mentioned to provide overview and scope. Such nonmetal oxidation catalysts include the alpha-halo carbonyl compounds 1, ketones 2, imines 3, iminium salts 4, and nitroxyl radicals 5. In combination with a suitable oxygen source (H2O2, KHSO5, NaOCl), these catalysts serve as precursors to the corresponding oxidants, namely, the perhydrates I, dioxiranes II, oxaziridines III, oxaziridinium ions IV, and finally oxoammonium ions V. A few of the salient features about these nonmetal, catalytic systems shall be reiterated in this summary. The first class entails the alpha-halo ketones, which catalyze the oxidation of a variety of organic substrates [figure: see text] by hydrogen peroxide as the oxygen source. The perhydrates I, formed in situ by the addition of hydrogen peroxide to the alpha-halo ketones, are quite strong electrophilic oxidants and expectedly transfer an oxygen atom to diverse nucleophilic acceptors. Thus, alpha-halo ketones have been successfully employed for catalytic epoxidation, heteroatom (S, N) oxidation, and arene oxidation. Although high diastereoselectivities have been achieved by these nonmetal catalysts, no enantioselective epoxidation and sulfoxidation have so far been reported. Consequently, it is anticipated that catalytic oxidations by perhydrates hold promise for further development, especially, and should ways be found to transfer the oxygen atom enantioselectively. The second class, namely, the dioxiranes, has been extensively used during the last two decades as a convenient oxidant in organic synthesis. These powerful and versatile oxidizing agents are readily available from the appropriate ketones by their treatment [figure: see text] with potassium monoperoxysulfate. The oxidations may be performed either under stoichiometric or catalytic conditions; the latter mode of operation is featured in this review. In this case, a variety of structurally diverse ketones have been shown to catalyze the dioxirane-mediated epoxidation of alkenes by monoperoxysulfate as the oxygen source. By employing chiral ketones, highly enantioselective (up to 99% ee) epoxidations have been developed, of which the sugar-based ketones are so far the most effective. Reports on catalytic oxidations by dioxiranes other than epoxidations are scarce; nevertheless, fructose-derived ketones have been successfully employed as catalysts for the enantioselective CH oxidation in vic diols to afford the corresponding optically active alpha-hydroxy ketones. To date, no catalytic asymmetric sulfoxidations by dioxiranes appear to have been documented in the literature, an area of catalytic dioxirane chemistry that merits attention. A third class is the imines; their reaction with hydrogen peroxide or monoperoxysulfate affords oxaziridines. These relatively weak electrophilic oxidants only manage to oxidize electron-rich substrates such as enolates, silyl enol ethers, sulfides, selenides, and amines; however, the epoxidation of alkenes has been achieved with activated oxaziridines produced from perfluorinated imines. Most of the oxidations by in-situ-generated oxaziridines have been performed stoichiometrically, with the exception of sulfoxidations. When chiral imines are used as catalysts, optically active sulfoxides are obtained in good ee values, a catalytic asymmetric oxidation by oxaziridines that merits further exploration. The fourth class is made up by the iminium ions, which with monoperoxysulfate lead to the corresponding oxaziridinium ions, structurally similar to the above oxaziridine oxidants except they possess a much more strongly electrophilic oxygen atom due to the positively charged ammonium functionality. Thus, oxaziridinium ions effectively execute besides sulfoxidation and amine oxidation the epoxidation of alkenes under catalytic conditions. As expected, chiral iminium salts catalyze asymmetric epoxidations; however, only moderate enantioselectivities have been obtained so far. Although asymmetric sulfoxidation has been achieved by using stoichiometric amounts of isolated optically active oxaziridinium salts, iminium-ion-catalyzed asymmetric sulf-oxidations have not been reported to date, which offers attractive opportunities for further work. The fifth and final class of nonmetal catalysts concerns the stable nitroxyl-radical derivatives such as TEMPO, which react with the common oxidizing agents (sodium hypochlorite, monoperoxysulfate, peracids) to generate oxoammonium ions. The latter are strong oxidants that chemoselectively and efficiently perform the CH oxidation in alcohols to produce carbonyl compounds rather than engage in the transfer of their oxygen atom to the substrate. Consequently, oxoammonium ions behave quite distinctly compared to the previous four classes of oxidants in that their catalytic activity entails formally a dehydrogenation, one of the few effective nonmetal-based catalytic transformations of alcohols to carbonyl products. Since less than 1 mol% of nitroxyl radical is required to catalyze the alcohol oxidation by the inexpensive sodium hypochlorite as primary oxidant under mild reaction conditions, this catalytic process holds much promise for future practical applications.     

具有底水油藏高含水油井封堵技术探讨

针对新疆油田各区块油井底水上窜使油井含水上升的问题,进行了分析研究,认为：有相当大部分油井既存在管外窜,同时又存在地层窜。在室内研究的基础上,成功的将具有地层封堵性好的KZ高强度封堵剂与新型油水井堵漏封窜剂XP-1（该剂在管外窜槽中能够快速形成网架结构,驻留性强）结合,通过合理的工艺应用于现场,取得了良好的效果,提高了高含水油井封窜的成功率。     

STUDY OF K_(2)O·6TiO_(2) WHISKER REINFORCED AI COMPOSITES FOR THEIR MECHANICAL PROPERTIES AND INTERFACIAL STRUCTURES

A newly developed whisker K_2O 6TiO_2 reinforeed 6061Al composite was prepared bysqueeze casting process.The flexural strength of the composite is 518MPa,and deereasesto 490MPa after T6 treatment.The hardness of the composite also shows the similarchange while T6 treating.The results of HRTEMobservation may explaine this property.change.It was considered that there is a continuous TiO layer at the whisker-matrix inter-face,which is easily to react with the segregated Mg and to form MgTi_2O_4,MgAl_2O_4.Thethickening of TiO layer after T6 treatment is the main reason resulting is strength degra-dation of composite.