Synthesis of succinic acid-based polyamide through direct solid-state polymerization method: Avoiding cyclization of succinic acid

Succinic acid is an important synthetic monomer but it is difficult to use it as a precursor for synthesizing high molecular weight polyamide, due to its tendency to perform intra-cyclization reaction at high temperature. In order to solve this problem, in this paper, the direct solid-state polymerization (DSSP) method with the initial reactant, nylon salt which was composed of 1, 5-diaminopentane, succinic acid, and terephthalic acid, was applied to synthesize the bio-based copolyamide PA 5T/54. In comparison with the conventional melting polymerization method, the DSSP method can prevent the cyclization reaction of succinic acid effectively due to the lower reacting temperature as well as the restriction effect of the nylon salt. As a result, the product fabricated by DSSP method has higher molecular weight and much lighter color from red to white. Therefore, the DSSP method is advantageous for the synthesis of the polymers or copolymers composed of the succinic acid as the monomer. Furthermore, the polymerization mechanism proposed in this work can serve as a guidance for the design of the molecular structure and control of the polymerization process.     

纯电环卫车箱体轻量化的有限元分析方法研究

以16t纯电环卫车箱体为研究对象,通过有限元分析方法的研究,在实现轻量化设计的同时解决了箱体开裂的问题,经实车验证强度满足,同时实现降重40kg,为纯电环卫车的轻量化设计提供了一条可行的途径.     

Aminoacyl-tRNA Synthetases as Valuable Targets for Antimicrobial Drug Discovery

Aminoacyl-tRNA synthetases (aaRSs) catalyze the esterification of tRNA with a cognate amino acid and are essential enzymes in all three kingdoms of life. Due to their important role in the translation of the genetic code, aaRSs have been recognized as suitable targets for the development of small molecule anti-infectives. In this review, following a concise discussion of aaRS catalytic and proof-reading activities, the various inhibitory mechanisms of reported natural and synthetic aaRS inhibitors are discussed. Using the expanding repository of ligand-bound X-ray crystal structures, we classified these compounds based on their binding sites, focusing on their ability to compete with the association of one, or more of the canonical aaRS substrates. In parallel, we examined the determinants of species-selectivity and discuss potential resistance mechanisms of some of the inhibitor classes. Combined, this structural perspective highlights the opportunities for further exploration of the aaRS enzyme family as antimicrobial targets.     

High energy storage and ultrafast discharge in NaNbO3-based lead-free dielectric capacitors via a relaxor strategy

Dielectric capacitors with decent energy storage and fast charge-discharge performances are essential in advanced pulsed power systems. In this study, novel ceramics (1-x)NaNbO₃-xBi(Ni_2/3Nb_1/3)O₃(xBNN, x = 0.05, 0.1, 0.15 and 0.20) with high energy storage capability, large power density and ultrafast discharge speed were designed and prepared. The impedance analysis proves that the introducing an appropriate amount of Bi(Ni_0·5Nb_0.5)O₃ boosts the insulation ability, thus obtaining a high breakdown strength (E_b) of 440 kV/cm in xBNN ceramics. A high energy storage density (W_total) of 4.09 J/cm³, recoverable energy storage density (W_rec) of 3.31 J/cm³, and efficiency (η) of 80.9% were attained in the 0.15BNN ceramics. Furthermore, frequency and temperature stability (fluctuations of W_rec ≤ 0.4% over 5–100 Hz and W_rec ≤ 12.3% over 20–120 °C) were also observed. The 0.15BNN ceramics exhibited a large power density (19 MW/cm³) and ultrafast discharge time (~37 ns) over the range of ambient temperature to 120 °C. These enhanced performances may be attributed to the improved breakdown strength and relaxor behavior through the incorporation of BNN. In conclusion, these findings indicate that 0.15BNN ceramics may serve as promising materials for pulsed power systems.     

分布式连接全装配RC楼盖动力特性分析

为研究分布式连接全装配RC楼盖(DCPCD)的动力特性,进行了 4个足尺DCPCD试件和一个整浇板试件在两端简支条件下的锤击法试验和数值模拟分析,研究了 DCPCD的板缝构造、连接件锚固方式、边界约束条件和自重等对楼盖竖向动力特性的影响.试验结果表明:与整浇板相比DCPCD横板向刚度较小,自振频率较低,板缝构造是影响楼盖刚度和振动特性的主要因素;连接件数量越多,楼盖的刚度和自振频率越高;板缝数量越多,楼盖的刚度和自振频率越低.所提出的有限元模拟方法可以准确模拟DCPCD的动力特性;连接件锚固强度越高,楼盖的刚度和自振频率越高;两端嵌固约束下的楼盖基频比两端简支约束下提高了 70％;随着楼盖自重的增加,自振频率显著降低.研究结果可为四边约束下楼盖的竖向振动特性与人致激励响应研究提供参考和依据.     

Key-dependent side-channel cube attack on CRAFT

CRAFT is a tweakable block cipher introduced in 2019 that aims to provide strong protection against differential fault analysis. In this paper, we show that CRAFT is vulnerable to side-channel cube attacks. We apply side-channel cube attacks to CRAFT with the Hamming weight leakage assumption. We found that the first half of the secret key can be recovered from the Hamming weight leakage after the first round. Next, using the recovered key bits, we continue our attack to recover the second half of the secret key. We show that the set of equations that are solvable varies depending on the value of the key bits. Our result shows that 99.90% of the key space can be fully recovered within a practical time.     

Tribological behavior and applications of carbon fiber reinforced ceramic composites as high-performance frictional materials

Due to the favorable tribological, mechanical, chemical, and thermal properties, carbon fiber reinforced ceramic composites, especially carbon fiber reinforced carbon and silicon carbide dual matrix composites (C/C–SiC), has been considered as high-performance frictional materials. In this paper, current applications and recent progress on tribological behavior of C/C–SiC composites are reviewed. The factors affecting the friction and wear properties, including the content of silicon carbide and carbon matrix, carbon fiber preform architecture, as well as the matrix modification by alloy additives and C/C–SiC composites under various test conditions are reviewed. Furthermore, based on the current status of researches, prospect of several technically available solutions for low-cost manufacturing C/C–SiC composites is also proposed.     

甲玛地区角岩矿微生物浸出的试验研究

介绍了西藏华泰龙矿业开发有限公司角岩的矿石性质,针对该低品位铜矿石进行了详细的微生物浸出试验研究,在原矿铜品位仅为0.12%、SiO_2含量高达69.12%的情况下,用接种量为10%的浸矿菌液,浸出1 d时,铜浸出率即为34.44%,浸出11 d时,浸出率达到70.02%,此时较无菌条件下的浸出率高出17.46个百分点。     

等温退火对8030铝合金导线组织性能的影响

研究了不同等温退火工艺对8030铝合金导线组织及性能的影响。结果表明:等温退火前后合金均由α-Al基体和Al₆Fe相组成。在同一等温温度下,随着等温时间的延长组织逐渐趋于均匀化;同一等温时间下,随着等温温度的升高,组织趋于均匀化的时间缩短。经过等温退火处理后铝合金导线的导电率均有所提高,在470 ℃均匀化退火24 h后再经240 ℃等温4 h,合金导电率达到最高值57.21%IACS,比未经热处理试样的导电率提高了2.4%IACS。经过等温退火处理后铝合金导线的硬度及抗拉强度均有所降低,塑性大幅度提高。在470 ℃均匀化退火24 h后再经260 ℃等温8 h,合金的伸长率最高可达23.64%。热处理前后合金均为塑性断裂。     

基于多尺度CSRBFs的地层三维地质建模

基于矿山多源数据实现地层三维地质建模是数字矿山研究中的一项重要工作，其成果有助于矿山资源评估、生产规划编制等工作的有序进行。采用插值方法对离散采样的非均匀点状数据进行处理，是精准构建矿体模型的关键。然而，矿体建模常用的插值方法在处理数据时，很少有效顾及数据的非均匀性。基于多尺度CSRBFs插值方法，提出了一种可以处理非均匀数据的地层三维建模技术。首先从多源数据中提取非均匀的地质离散点数据集。然后，使用多尺度CSRBFs插值构建地层表面模型，插值步骤包括：①样品点获取与单位法向量计算；②通过八叉树空间索引构建层次点集；③使用多尺度CSRBFs方法在样品点集上由粗到细逐层插值，计算地层表面隐式函数；④地层隐式曲面可视化。最后，使用提出的断层建模方法在连续地层表面构建正断层、逆断层和交叉断层模型。研究表明：多尺度CSRBFs（Multi-scale CSRBF， MsCSRBF）插值方法通过十折交叉验证获得的平均误差为0.943 m，精度优于反距离加权法（Inverse Distance Weighted， IDW）和普通克里金法（Ordinary Kriging， OK），且MsCSRBF方法相比于IDW和OK方法插值运算效率更高。上述分析表明：多尺度CSRBFs差值方法能够针对非均匀数据进行地层表面模型的高精度、快速重建。