Synthesis and characterization of cellulose nanowhisker-reinforced-poly(ε-caprolactone) scaffold for tissue-engineering applications

Poly(ε-caprolactone) (PCL) is a bioresorbable and biocompatible polymer with assorted medical applications. However, remarkable hydrophobicity and nonosteoconductivity have stood as a barrier to limit its applications. The present study aims to modify the bulk characteristics of PCL to develop a polymeric scaffold with adequate structural and mechanical properties to support regenerated tissues. For this purpose, functionalized bacterial cellulose nanowhiskers (BCNW-g-βCD-PCL₂₀₀₀) are synthesized. Reinforcing PCL matrix with 4 wt % of the nanowhiskers resulted in a bionanocomposite with promoted bulk properties. Compared to neat PCL, the obtained bionanocomposite shows improvements of 115 and 51% in tensile strength and Young's modulus, respectively; 20% increase in hydrophilicity; 7% increase in degradation rate; and 6% decrease in crystallinity. Gas foaming/combined particulate leaching technique is used to develop highly porous structures of 86–95% porosity with interconnected macropores of mean pore diameters of 250–420 μm. Porous scaffolds showed compression modulus values of 5.3–9.1 MPa and would have promising applications in regenerative medicine. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48481.     

Studies on Properties of Rice Straw/Polymer Nanocomposites Based on Polycaprolactone and Fe3O4 Nanoparticles and Evaluation of Antibacterial Activity

Modified rice straw/Fe₃O₄/polycaprolactone nanocomposites (ORS/Fe₃O₄/PCL-NCs) have been prepared for the first time using a solution casting method. The RS/Fe₃O₄-NCs were modified with octadecylamine (ODA) as an organic modifier. The prepared NCs were characterized by using X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD results showed that as the intensity of the peaks decreased with the increase of ORS/Fe₃O₄-NCs content in comparison with PCL peaks, the Fe₃O₄-NPs peaks increased from 1.0 to 60.0 wt. %. The TEM and SEM results showed a good dispersion of ORS/Fe₃O₄-NCs in the PCL matrix and the spherical shape of the NPs. The TGA analysis indicated thermal stability of ORS/Fe₃O₄-NCs increased after incorporation with PCL but the thermal stability of ORS/Fe₃O₄/PCL-NCs decreased with the increase of ORS/Fe₃O₄-NCs content. Tensile strength was improved with the addition of 5.0 wt. % of ORS/Fe₃O₄-NCs. The antibacterial activities of the ORS/Fe₃O₄/PCL-NC films were examined against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using nutrient agar. The results indicated that ORS/Fe₃O₄/PCL-NC films possessed a strong antibacterial activity with the increase in the percentage of ORS/Fe₃O₄-NCs in the PCL.     

Aging of novel membranes made of PVA and cellulose nanocrystals extracted from Egyptian rice husk manufactured by compression moulding process

Novel membranes consisting of polyvinyl alcohol (PVA), cellulose nanocrystals (CNCs) originated from Rice Husk (RH), Glutaraldehyde (GLA) and Glycerine (G) were manufactured by the compression moulding process. Rice husk is a new source to isolate pure cellulose nanocrystals via mechanical and chemical treatment. The biodegradability of the membranes has been evaluated using UV accelerated weathering as well as a soil burial test. The morphology of membranes (PVA/RH-CNCs) was characterized by using the Scanning Electron Microscope (SEM). The chemical structure of the membranes (PVA/RH-CNCs) was characterised by Fourier-Transformation Infrared (FTIR) spectroscopy as well as wide-angle X-ray diffraction. The mechanical properties of the membranes were evaluated using standard techniques. Swelling and weight loss resulting from biodegradation were also evaluated. The results showed that the developed transient membranes can be used as food packaging bags owing to biodegradability (weight loss) under irradiation and during soil burial.     

Fabrication of 0.24Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.34PbTiO3 transparent ceramics by conventional sintering technique

0.24Pb(In_1/2Nb_1/2)O₃-0.42Pb(Mg_1/3Nb_2/3)O₃-0.34PbTiO₃ transparent ceramics were fabricated by a conventional sintering technique. Through optimization of sintering conditions of calcination and sintering temperatures and time, the obtained ceramics showed high optical transmittance of 53% and 71% at light wavelengths of 1300 and 2000 nm, respectively. The ceramics showed a rhombohedral to tetragonal phase transition at ~120°C and a tetragonal to cubic phase transition at 222°C. These transition temperatures were higher than those of 0.67Pb(Mg_1/3Nb_2/3)-0.33PbTiO₃ ceramics. In addition, the ceramics had a ferroelectric hysteresis loop, a large piezoelectric constant d₃₃ of 407 pC/N, and a planar electromechanical coupling factor k_p of 52%. These results suggest that the transparent ceramics may be used as a temperature-stable, linear electro-optic material.     

Using bent carbon nanotubes for the fabrication of electromechanical switches

An electromechanical switch based on bent carbon nanotubes was fabricated. The shape and structure of the bent carbon nanotubes allows one to produce a low cost and low working voltage switch. The fabrication process is free of any nanolithography. The electrical characteristics of the fabricated device were investigated, both experimentally and theoretically. Actuation of the fabricated device shows hysteresis behavior in the measured I–V curves depending on the structural parameters of the bent nanotubes. The relationship between the pull-in voltage and the morphology of the bent nanotubes was studied by the obtained hysteresis curves. A scanning electron microscope was used for structural analysis. This study introduced an easy way to fabricate electromechanical switches with controllable on/off states.     

Feasibility study of a solar chimney power plant in Jordan

A solar chimney power plant system is theoretically designed for future erection in Jordan. Analytical analysis of the system is simulated by mathematical software. The actual values of solar irradiation in Jordan are used in the simulation to predict the power output of the solar chimney power plant. The output results of the maximum (inlet) values of velocity, pressure, and mass flow rate of air versus the chimney height variation are obtained. Furthermore, the electrical power output and the efficiency of chimney versus chimney height variation were determined. For a solar collector diameter of 40 m and a chimney diameter of 3.5 m, the maximum power output (85 kW) was obtained for a chimney height of 210 m.     

Nonaxisymmetric elastoacoustic analysis of a submerged eccentric hollow sphere: an exact solution

The classical Navier equations of linear elasticity and the Helmholtz equation for the internal/external acoustic domains in conjunction with the translational addition theorem for spherical vector wave functions are employed to present an exact solution for three-dimensional nonaxisymmetric steady-state sound radiation from an eccentric hollow elastic sphere, immersed in and filled with acoustic fluids, and subjected to arbitrary time-harmonic mechanical drives at its internal/external surface. The analytical results are illustrated with numerical examples in which air-filled, water-submerged, thick-walled concentric and eccentric steel spheres are driven by harmonic concentrated or distributed radial internal/external loads. The numerical results reveal the important effects of sphere eccentricity, loading configuration, and excitation frequency on the sound radiation characteristics of the submerged structure. Limiting cases are considered and the validity of results is established with the aid of a commercial finite element package as well as by comparison with the data in the existing literature.