排序方式: 共有35条查询结果,搜索用时 0 毫秒
1.
采用自制高岭土/木质素磺酸钠接枝丙烯酸-丙烯酰胺复合高吸水树脂(KLPAAM),测定了其在CuCl2、ZnCl2溶液中的吸附性能;通过FTIR、TG、SEM及吸附动力学方程模拟,对其吸附机理进行了探讨。KLPAAM对Cu2+的吸附量随Cu2+in situ growth of carbon nanotubes (CNTs) at both the basal planes and the edges of GO templates, engendering a minute-level and straightforward route to create 3D hierarchical nanohybrids (GO-CNT). The nanohybrids and GO [1%, 2% and 3%(mass)] were incorporated into polypropylene (PP) using common extrusion compounding amenable to scale up. Unlike the prominent local aggregation of GO in PP composites, GO-CNT was properly exfoliated and dispersed regardless of the loadings. This contributed to multiple improvements in mechanical properties and thermal conductivity for GC/PP, as exemplified by the highest yield strength (38.0 MPa) and thermal conductivity [0.76 W/(m·K)] for GC3, displaying remarkable increase of 20% and 230% compared to those of pure PLA. This work affords elucidation of direct covalent functionalization of 2D nanosheets and property-by-morphology understanding in polymer composites, which may motivate further extension to other polymer composite systems. 相似文献
2.
3.
采用溶液聚合方法,以丙烯酸(AA)与丙烯酰胺(AM)为单体,N,N’-亚甲基双丙烯酰胺(NMBA)为交联剂,过硫酸钾(KPS)为引发剂以及一定量的高岭土,通过正交实验设计合成了高岭土/聚丙烯酸-丙烯酰胺复合高吸水性树脂(CPAAM),得到了最优配方条件为:单体总浓度35%(质量浓度,下同),丙烯酸中和度60%,引发剂、交联剂浓度分别为0.2%、0.08%(相对于总单体质量),高岭土浓度5%(相对于总单体质量);此时CPAAM在自来水、0.9%NaCl溶液中的吸液倍率分别为221、47g/g;同时考察了其在有机溶液中的吸液性能。 相似文献
4.
为了考察煤的孔隙分布对煤低温氧化耗氧速率影响机理,利用孔树模型,建立了煤低温氧化耗氧速率的数学模型,得出煤氧化控制由扩散控制转化为动力控制的临界孔径rc(T),rc(T)随着温度升高呈线性增加趋势,表明温度升高,煤氧化逐渐由反应动力控制.该数学模型可确定不同孔分布煤的主要耗氧控制模式,反映耗氧速率与煤孔分布特征、温度的理论变化关系;当煤的有效孔隙率、孔径分布和微孔比已知时,还可用该数学模型对煤的耗氧速率进行预测. 相似文献
5.
何新建 《中国新技术新产品》2011,(11):40-40
随着桥梁的建设范围日益广泛,施工技术要求也越来越高,如何保持桥梁建设的竞争力就要不断的探索新方法,桥梁转体施工就是新的途径。本文对桥梁转体施工的关键性技术以及在国内外实际的桥梁施工中的应用进行了详细的阐述,以供相关人员参考。 相似文献
6.
7.
以丙烯酸和丙烯酰胺为单体合成了PAAAM高吸水树脂,研究了该树脂在不同介质中的吸液性能,以及在自然蒸发条件下树脂用量及不同介质溶液对土壤保水率的影响.结果表明,该树脂在蒸馏水中的吸液倍率最大,在人工尿中的吸液倍率最小.PAAAM高吸水树脂用量为1.5%时,土壤保水率下降明显减慢,土壤保水性能提高.且树脂用量越多,土壤保水率下降越慢.PAAAM高吸水树脂在自来水中的保水率优于在0.9%食盐水中的保水率,该树脂更适合在沙质土壤中使用. 相似文献