Effect of doped Mn on piezoelectric properties of （Na0.5Bi0.5 ）0.92 Ba0.08 TiO3 lead-free ceramics

Piezoelectric ceramics (Na0.5Bi0.5)0.92Ba0.05TiO3 x%MnCO3(BNBT-Mn, x=0-1.6,mass fraction)were synthesized by conventional solid state reaction. The results show that when the addition of MnCO3 is 0-1.4%, BNBT-Mn ceramics exhibit a single-phase perovskite structure. With the increase of content of MnCO3, piezoelectric constant and electromechanical coupling factor increase rapidly when x is lower than 0.3. Then they both decrease when x is in the range of 0.3 and 1.6. When x=0.3, piezoelectric constant and electromechanical coupling factor reach the maximum value of 160 pC/N and 58.5% respectively, which can improve the temperature stability of BNBT-Mn.     

锰掺杂对(Na0.5Bi0.5)0.92Ba0.08TiO3压电陶瓷性能的影响

研究了 Mn掺杂对 (Na0.5Bi0.5)0.92Ba0.08TiO3系陶瓷介电、压电与铁电性能的影响. X- ray衍 射结构分析表明掺杂适量的 Mn得到单一的钙钛矿结构,无第二相出现.当添加 0.3 wt % MnCO3 时,介电常数达到 1850;矫顽场强 Ec降低至 3.54kV/mm;压电常数 d33达到 160× 10- 12 C/N.该 材料的温度稳定性也得到改善.     

AlN薄膜体声波谐振器研究

采用一维Mason模型,研究了体声波谐振器的频率特性,探讨了压电薄膜AlN和上电极膜厚对谐振频率的影响,压电参数d33及压电薄膜与电极的厚度比率对机电耦合系数的影响,同时研究了谐振区域的面积和声能在衬底中的损耗对品质因数的影响.测量的体声波谐振器频率特性曲线与模拟结果吻合的较好.     

Effect of doped Mn on piezoelectric properties of (Na_(0.5)Bi_(0.5))_ (0.92)Ba_(0.08)TiO_3 lead-free ceramics

1INTRODUCTION Therehasbeengreatinterestinthestudiesof thelead freematerialswithdielectric,piezoelectricandferroelectricpropertiesinthefieldoffunction almaterialsfortheiramiabilitytoenvironment. (Na1/2)TiO3(NBT)ceramicshavebeenwidelystudiedbecauseoftheirrelativelylargeremnant polarization(Pr)of38μC/cm2andcoercivefieldof 73kV/cm[1].However,NBTcannotreplacelead zirconatetitanate(PZT)basedceramicsbecausethepiezoelectricpropertiesofNBTarestillnot comparabletothoseofPZT[24].Recently,m…     

AlN薄膜体声波谐振器的制备与性能分析

采用直流磁控反应溅射,在Pt电极上沉积了AlN压电薄膜,并制备了以SiO2为声反射层的体声波谐振器。用X-射线衍射(XRD)、电镜扫描(SEM)、原子力显微镜(AFM)测试表明,制备出的AlN薄膜具有高c轴择优取向、良好的柱状晶结构以及平滑的表面;用网络分析仪测试体声波谐振器得到较好的频率特性,即串、并联谐振频率分别为1.22 GHz1、.254 GHz,机电耦合系数为6.68%,带宽20 MHz。