排序方式: 共有37条查询结果,搜索用时 125 毫秒
1.
脉冲激光沉积(La(0.2)Bi(0.8)FeO3)(0.8)-(NiFe2O4)(0.2)薄膜及其多铁性能研究 总被引:1,自引:0,他引:1
采用脉冲激光沉积法,在(100)SrTiO3基底上,制备了(La0.2Bi0.8FeO3)0.8-(NiFe2O4)0.2(LBFO-NFO)多铁薄膜,通过X射线衍射仪和场发射扫描电子显微镜确定了LBFO-NFO多铁薄膜的显微结构,通过标准铁电测试系统(RT-66A)和振动样品磁强计(VSM)分别测试了LBFO-NFO多铁薄膜的铁电性能和铁磁性能.研究发现:多铁薄膜中LBFO和NFO二相均沿(100)方向外延生长,晶粒尺寸在100-150nm之间;薄膜具有明显的电滞回线(Ps=7.6μC/cm2)和磁滞回线(Ms=4.12×104A/m),显示出明显的铁电铁磁共存特性.通过对薄膜生长条件的控制,可削除杂质相,减小LBFO-NFO薄膜的漏电流,提高铁电及铁磁性能. 相似文献
2.
采用脉冲激光沉积法, 在(100)SrTiO3基底上, 制备了(La0.2Bi0.8FeO3)0.8-(NiFe2O4) 0.2(LBFO-NFO)多铁薄膜, 通过X射线衍射仪和场发射扫描电子显微镜确定了LBFO-NFO多铁薄膜的显微结构, 通过标准铁电测试系统(RT-66A)和振动样品磁强计(VSM)分别测试了LBFO-NFO多铁薄膜的铁电性能和铁磁性能. 研究发现: 多铁薄膜中LBFO和NFO二相均沿(100)方向外延生长, 晶粒尺寸在100~150nm之间; 薄膜具有明显的电滞回线(Ps=7.6μC/cm2)和磁滞回线(Ms=4.12×104A/m), 显示出明显的铁电铁磁共存特性. 通过对薄膜生长条件的控制, 可削除杂质相, 减小LBFO-NFO薄膜的漏电流, 提高铁电及铁磁性能. 相似文献
3.
电磁污染的日益严重和军事隐身技术的需求为吸波材料的研究和发展提供机遇。吸波材料对电磁波的吸收主要依赖于填充其中的电磁波吸收剂。磁性纤维吸收剂以其良好的电磁性能可调性,高的磁导率和磁损耗,得到国内外学者的广泛关注和研究。综述铁氧体磁性纤维、金属磁性纤维、磁性非晶纤维、纳米纤维几种吸收剂的研究现状,并对它们各自的特点及发展作了较为详尽的评述。认为磁性纤维必将向着多功能化、非晶化、纳米化的方向发展。 相似文献
4.
5.
The characteristics of backward harmonic radiation due to electron oscillations driven by a linearly polarized fs laser pulse are analysed considering a single electron model. The spectral distributions of the electron's backward harmonic radiation are investigated in detail for different parameters of the driver laser pulse. Higher order harmonic radiations are possible for a sufficiently intense driving laser pulse. We have shown that for a realistic pulsed photon beam, the spectrum of the radiation is red shifted as well as broadened because of changes in the longitudinal velocity of the electrons during the laser pulse. These effects are more pronounced at higher laser intensities giving rise to higher order harmonics that eventually leads to a continuous spectrum. Numerical simulations have further shown that by increasing the laser pulse width the broadening of the high harmonic radiations can be controlled. 相似文献
6.
7.
以SrTiO3(STO)为基片,以La0.7Sr0.3MnO3(LSMO)为缓冲层,采用脉冲激光沉积法制备了Bi0.8La0.2FeO3(BLFO)/LSMO/STO多铁薄膜。通过生长条件控制,得到单相的BLFO薄膜,且沿(100)面生长,晶粒尺寸为40nm,厚度为223nm。BLFO/LSMO/STO纳米晶薄膜的最大电极化为25μC/cm2,饱和磁化强度为30kA/m,具有多铁性能。 相似文献
8.
9.
The Ni microcantilevers were fabricated by femtosecond laser. The corrosion behavior of the micro-sized Ni cantilever beams was studied by electrochemical noise and a newly developed fatigue testing method. The results show that the micro-sized specimens exhibit general corrosion behavior under the studied corrosion condition, whereas the ordinary-sized plates exhibit the localized corrosion behavior. The critical load amplitude of the micro-sized Ni specimens under corrosion fatigue status was determined to be 15 mN. The maximum bending loads, which were measured by fatigue tests, decrease gradually prior to final fracture. Corrosion fracture first occurs in the range of notch with a higher tensile bending stress, and exhibits clear evidence of trans-columnar fracture. The variation of maximum bending loads with time agrees with that creep deformation of the micro-sized Ni specimens can easily occur at room temperature, which implies that the micro-sized Ni specimens appear to have an improved resistance towards total crack as compared with the ordinary-sized Ni specimens. 相似文献
10.
将不同比例的羰基铁和羰基镍混合气体在磁场引导下加热分解、形成了铁含量分别为80、55、20(ω/%,质量分数,下同)的羰基铁镍纤维.通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)研究了羰基铁镍纤维相组成和形貌特征.将羰基铁镍纤维混合于环氧树脂中,经强磁场取向后制成同轴样品,通过矢量网络分析仪研究了其在2~18 GHz范围内的微波磁性能.结果发现羰基铁镍纤维的直径、长径比及形貌可通过磁场大小调节.对于直径为微米级的羰基铁镍纤维,其饱和磁化强度对微波磁性能的影响远大于直径及长径比的影响.当铁含量为20%纤维的直径减小到亚微米(0.8 μm)时,由于忽略了趋肤效应以及高的长径比,使其微波磁性能急剧提高. 相似文献