Biodegradation of chlorpyrifos by either single or combined cultures of some soilborne plant pathogenic fungi

Biodegradation of chlorpyrifos was studied in liquid culture media amended with either single or combined eight different plant pathogenic fungi isolated from the continuous cropping wheat fields. The average recovery of chlorpyrifos from the liquid media was found to be 86.1%. The detection limit of chlorpyrifos by the analytical method used was 19 ppb. Data showed that the growth of mixed fungi at concentrations up to 200 ppm of chlorpyrifos was higher than in the control treatment. Chlorpyrifos concentrations declined in the medium of combined fungi more than it did in the medium of any single fungus with increase in the incubation period. The amount of chlorpyrifos recovered was 79.8 ppm (39.9%) in the combined fungal cultures after 21 days. However, those recovered from the media of Fusarium graminearum, F. oxysporum, Rhizoctonia solani, Cladosporium cladosporiodes, Cephalosporium sp., Trichoderma viridi, Alternaria alternata, and Cladorrhinum brunnescens, ranged from 48.0 to 74.8%. The half-life value (T1/2) for chlorpyrifos was 15.8 day in the medium amended with mixed fungi. However, for the single cultures it ranged from 19.3 to 33.0 day.     

Reliability and scale effect in toughness of concrete structures

In the present work, the distribution of the random toughness characteristics (i.e. critical energy release rate, G_1c) has been evaluated on the basis of experimental observations. Fracture test results from three groups of geometrically similar concrete specimens of size (width×total depth×thickness), 420×420×50–1680×1680×200 mm³, made with different maximum aggregate size of 9.5, 19, 38, and 76 mm were analyzed using a recently proposed distribution of extremes. In applications of probability, it is important to use an appropriate distribution type and adequate techniques for estimating the parameters of distribution. In this study, a new type distribution of minima is employed for probability computations. It was noticed that the entropy of distribution increases with the crack length, i.e. the uncertainty of toughness, G_1c, value increases with crack length. A non-linear reduction of the maximum allowable splitting force with the defect size, a, was noticed. For large specimens, the maximum allowable splitting load is more sensitive to the required reliability level than that for small specimens. Reliability increases with aggregate size when all other conditions were constant.     

Study of the structure of As0.3Se0.2S0.4Ge0.1 chalcogenide glass using the radial distribution function

In the present work, the structure of As_0.3Se_o.3S_0.4Ge_0.1 chalcogenide glass has been studied using the radial distribution function (RDF). Moreover, the effect of annealing temperature on the short range order of this glass has been investigated. The results revealed that the short range order structure of the as-prepared and annealed As_0.3Se_0.2S_0.4Ge_0.1 chalcogenide glass is close to a regular tetrahedron. The medium range order of As_0.3Se_0.4S_0.4Ge_0.1 chalcogenide glass is topology order. The topological structure of the medium range order can be described by the Phillips model. The structure of As_0.3Se_0.2S_0.4Ge_0.1 chalcogenide glass is stable in the annealing temperature range 324–523 K.     

An object design framework for structural engineering

Object-oriented principles have introduced several useful concepts for developing complex software systems. As a result, several methodologies have been suggested for the overall design of software systems based on these concepts. Methodologies and frameworks for designing objects that are to be part of the software systems are currently lacking. This paper proposes anobject design framework andmethodology, which utilizes the object-oriented concepts, for planning, organizing and designing structural engineering design objects. Design objects in an integrated structural engineering system are complex and often related to each other in various different ways. The paper also identifies several important relationships among structural engineering design objects. These relationships serve as communication channels through wich design objects send messages to and receive responses from each other. Several examples, drawn from reinforced concrete structures, will be presented to demonstrate the object design methodology and to illustrate how the framework is effective in reducing the complexity of design objects in an integrated structural engineering system.     

Exporting water wave optimization concepts to modified simulated annealing algorithm for size optimization of truss structures with natural frequency constraints

This paper proposes an improved version of a recently proposed modified simulated annealing algorithm (MSAA) named as an improved MSAA (I-MSAA) to tackle the size optimization of truss structures with frequency constraint. This kind of problem is problematic because its feasible region is non-convex while the boundaries are highly non-linear. The main motivation is to improve the exploitative behavior of MSAA, taking concept from water wave optimization metaheuristic (WWO). An interesting concept of WWO is its breaking operation. Thirty functions extracted from the CEC2014 test suite and four benchmark truss optimization problems with frequency constraints are explored for the validity of the proposed algorithm. Numerical results indicate that I-MSAA is more reliable, stable and efficient than those found by other existing metaheuristics in the literature.

     

Performance evaluation of dynamic probabilistic broadcasting for flooding in mobile ad hoc networks

In mobile ad hoc networks (MANETs), flooding is a required message dissemination technique for network-wide broadcast. The conventional blind flooding algorithm causes broadcast storm problem, a high number of unnecessary packet rebroadcasts thus resulting in high contention and packet collisions. This paper proposes a new probabilistic approach that dynamically fine-tunes the rebroadcasting probability of a node for routing request packets (RREQs) according to the number of neighbour nodes. We evaluate the performance of the proposed approach for the ad hoc on demand distance vector (AODV) routing protocol and compared against the blind flooding, fixed probabilistic and adjusted probabilistic flooding [L.M.M.M. Bani-Yassein, M. Ould-Khaoua et al., Performance analysis of adjusted probabilistic broadcasting in mobile ad hoc networks, International Journal of Wireless Information Networks 13(2) (2006) 127–140; M.B. Yassein, M.O. Khaoua et al., Improving route discovery in on-demand routing protocols using local topology information in MANETs, Proceedings of the ACM international workshop on Performance Monitoring, Measurement, and Evaluation of Heterogeneous Wireless and Wired Networks, Terromolinos, Spain, ACM Press, 2006, pp. 95–99.] approaches. The simulation results show that our proposed approach demonstrates better performance than blind flooding, fixed probabilistic and adjusted flooding approaches.     

Aeroelastic tailoring using lamination parameters

The aim of the present work is to passively reduce the induced drag of the rear wing of a Formula One car at high velocity through aeroelastic tailoring. The angle-of-attack of the rear wing is fixed and is determined by the required downforce needed to get around a turn. As a result, at higher velocity, the amount of downforce and related induced drag increases. The maximum speed on a straight part is thus reduced due to the increase in induced drag. A fibre reinforced composite torsion box with extension-shear coupled upper and lower skins is used leading to bending-torsion coupling. Three-dimensional static aeroelastic analysis is performed loosely coupling the Finite Element code Nastran and the Computational Fluid Dynamics panel code VSAERO using ModelCenter. A wing representative of Formula One rear wings is optimised for minimum induced drag using a response surface methodology. Results indicate that a substantial induced drag reduction is achievable while maintaining the desired downforce during low speed turns.     

A study of the impact of the willingness-to-learn of CAD novice users on their competence development

The notion that ‘attitude drives behavior’ manifests itself in a variety of ways in educational and occupational settings. As applied to CAD competence development, industrial training of novice CAD users on their way to becoming competent CAD users consume a lot of corporate resources. This paper is the third paper in the line of research that attempts to answer the question having to do with what it takes to make a competent CAD user. Specifically, we examine the CAD-specific factors revolving around the trainees’ willingness-to-learn CAD.These factors are analyzed in two stages. At the start of the training, trainees’ initial attitude towards CAD is established by means of a short questionnaire. Afterwards, throughout the training, trainees’ behavior (online and offline practice) is gauged and, in turn, a relation is established to illustrate how this practice leads to the development of CAD-specific skills. For this purpose, another short questionnaire was utilized. Strong correlations were established relating the trainees’ CAD-specific behavior with the CAD-specific outcomes of learning CAD syntax.Furthermore, and in order to assess the quality of the trainees’ learning of CAD, overall competence was monitored throughout the study via performance measures that describe the time it took the trainees to build test models (speed), which reflects upon the ability to learn the syntax of the CAD tool (declarative knowledge). The sophistication of the models is also used as another measure. Correlating the trainees’ character attributes with these assessed measures, it was found that the stronger is the trainees’ will to learn CAD, the stronger is the likelihood to learn faster. Perhaps more importantly, trainees with initial favorable attitude toward CAD were shown to develop increasingly positive behavior that manifested through additional practice and other forms of visible effort.