Vibration-induced particle formation during yogurt fermentation—Effect of frequency and amplitude

Machinery such as pumps used for the commercial production of fermented milk products cause vibrations that can spread to the fermentation tanks. During fermentation, such vibrations can disturb the gelation of milk proteins by causing texture defects including lumpiness and syneresis. To study the effect of vibrations on yogurt structure systematically, an experimental setup was developed consisting of a vibration exciter to generate defined vibrational states and accelerometers for monitoring. During the fermentation of skim milk, vibrations (frequency sweep: 25 to 1,005 Hz) were introduced at different pH (5.7 to 5.1, step width 0.1 units) for 200 s. Physical properties of set gels (syneresis, firmness) and resultant stirred yogurts (visible particles, rheology, laser diffraction) were analyzed. Vibrational treatments at pH 5.5 to 5.2 increased syneresis, gel firmness, and the number of large particles (d > 0.9 mm); hence, this period was considered critical. The particle number increased from 34 ± 5 to 242 ± 16 particles per 100 g of yogurt due to vibrations at pH 5.4. In further experiments, yogurts were excited with fixed frequencies (30, 300, and 1,000 Hz). All treatments increased syneresis, firmness, and particle formation. As the strongest effect was observed by applying 30 Hz, the amplitude was set to vibration accelerations of a = 5, 10, 15, 20, and 25 m/s² in the final experiments. The number of large particles was increased due to each treatment and a positive correlation with the amplitude was found. We concluded that vibrations during gelation increase the collision probability of aggregating milk proteins, resulting in a compressed set gel with syneresis. Resultant stirred yogurts exhibit large particles with a compact structure leading to a reduced water-holding capacity and product viscosity.     

A flexible air separation process: 1. Design and steady-state optimizations

The flexible operation of energy-intensive processes, such as cryogenic air separation, has economic potential due to increasing fluctuations of the electricity markets. Multiproduct air separation processes with high ratios of liquid product are very promising for flexible operation due to storable products. We present a process design with an integrated liquefication cycle and liquid assist operation, that facilitates a high liquid product ratio and a flexible process operation. We use a mechanistic dynamic process model in steady-state process optimizations covering the wide operational range of the proposed process. The optimization results show that the power demand can be varied in a range from 3.5 to 28 MW without violating operational constraints by changing the nitrogen and oxygen production rates. Thus, the proposed process is a promising air separation candidate for flexible operation with respect to fluctuating electricity markets.     

Romanian River Basins Lag Time Analysis. The SCS-CN Versus RNS Comparative Approach Developed for Small Watersheds

Romanian policy makers have to perceive that human intervention on river basins land cover is influencing rainfall-runoff relation and the used methodology cannot accurately estimate watershed surface flow transformations. Global water cycles and energy fluxes understanding is leading to better predictions of land atmosphere interaction and local hydro-climates evolution. The water transfer time determination from rainfall to runoff needs accurate measurements of river basins hydrological parameters. Here, we analyzed and compared the lag time value results of two different methodologies (curve number and rational methodology) used for 54 Romanian small catchment areas study. The focus of this paper is the lag time evaluation and interpretation for an effective implementation of the best methodology approach in the Romanian geographical space. Our research in small river basins was developed using remote sensing technology maps, GIS and environmental datasets in combination with field work on every drainage basin in order to assess the specific morphological features and validate the land cover typology. We found that Soil Conservation Service - Curve Number (SCS-CN) method is widely used according to USA landscape features classification, but not necessarily applicable to Romanian river basins characteristics. Our results show how the official Romanian rational methodology national standard (RNS) can be improved and the limits of SCS-CN method.

     

Sodium and ultrafiltration profiling in hemodialysis: A long-forgotten issue revisited

Sodium and ultrafiltration profiling are method of dialysis in which dialysate sodium concentration and ultrafiltration rate are altered during the course of the dialysis session. Sodium and ultrafiltration profiling have been used, commonly simultaneously, to improve hemodynamic stability during hemodialysis. Sodium profiling is particularly effective in decreasing the incidence of intradialytic hypotension, while ultrafiltration profiling is suggested to decrease subclinical repeated end organ ischemia during dialysis. However, complications such as increased interdialytic weight gain and thirst due to sodium excess have prevented widespread use of sodium profiling. Evidence suggest that different sodium profiling techniques may lead to different clinical results, and preferring sodium balance neutral sodium profiling may mitigate adverse effects related to sodium overload. However, evidence is lacking on the long-term clinical outcomes of different sodium profiling methods. Optimal method of sodium profiling as well as the utility of sodium/ultrafiltration profiling in routine practice await further clinical investigation.     

Advanced Postirradiation Characterization of Nuclear Fuels Using Pulsed Neutrons

Methods for postirradiation characterization of bulk (cm³) irradiated materials or even spent nuclear fuels are sparse due to their extremely radioactive nature. While several methods exist to characterize smaller volumes (<?1 mm³) of such samples, selecting these volumes from larger samples is challenging. X-ray-based methods are prohibitive due to the strong γ-radiation from the sample flooding the detectors. Neutron-based methods available in the proximity of irradiation reactors allow for thermal neutron radiography or computed tomography using a small reactor source, but one cannot assess isotope distributions or microstructural features such as phases, texture, or strain from diffraction measurements due to flux limitations. We present herein a pathway to provide pulsed neutron characterization of bulk irradiated samples using time-of-flight neutron diffraction for microstructural characterization and energy-resolved neutron imaging for assessment of isotopic densities and distributions. Ultimately, laser-driven pulsed neutron sources may allow deployment of these techniques pool-side at irradiation reactors.

     

Estimation of heat transfer coefficient of forced-air cooling and its experimental validation in controlled processing of forgings

Estimation of the cooling efficiency of an accelerated air for the needs of cooling of die forgings is presented. Temperature dependence of heat transfer coefficient (HTC) was calculated for different cooling conditions varied by airflow velocity, covering the range from 18 to 48?m/s. Time–temperature measurements performed on a full-scale semi-industrial cooling line provided similarity to conditions typical of industrial conveyor, which gives the results utilitarian significance in design of controlled processing (of steel forged products). Acquired HTC values, ranging from 164.7 to 298?W/m²?·?K, were validated in numerical simulation of cooling complex-shape forgings and subject to experimental verification, indicating perfect agreement with physical measurements.