Influence of the Impaction Angle on the Triboelectric Charging of Aerosol Nanoparticles

A low pressure impactor is used to measure triboelectric charging behavior of metallic nanoparticles. Ag nanoparticles, produced by spark discharge, were impacted onto Pt sputtered targets. The influence of the impaction angle and impaction velocity on the triboelectric charging was investigated. While for perpendicular impaction the charge transfer behavior of previous work was confirmed, the oblique impaction revealed new phenomena. Additional charge transfer was observable, which increases with obliqueness. The possibility of mass transfer between particle and target due to the high-energy collisions was also investigated. SEM characterization and Auger spectroscopy indicate mass transfer from the particle to the target surface.     

Tunable Spectrum Selectivity for Multiphoton Absorption with Enhanced Visible Light Trapping in ZnO Nanorods

Observation of visible light trapping in zinc oxide (ZnO) nanorods (NRs) correlated to the optical and photoelectrochemical properties is reported. In this study, ZnO NR diameter and c‐axis length respond primarily at two different regions, UV and visible light, respectively. ZnO NR diameter exhibits UV absorption where large ZnO NR diameter area increases light absorption ability leading to high efficient electron–hole pair separation. On the other hand, ZnO NR c‐axis length has a dominant effect in visible light resulting from a multiphoton absorption mechanism due to light reflection and trapping behavior in the free space between adjacent ZnO NRs. Furthermore, oxygen vacancies and defects in ZnO NRs are associated with the broad visible emission band of different energy levels also highlighting the possibility of the multiphoton absorption mechanism. It is demonstrated that the minimum average of ZnO NR c‐axis length must satisfy the linear regression model of Z _p,min = 6.31d to initiate the multiphoton absorption mechanism under visible light. This work indicates the broadening of absorption spectrum from UV to visible light region by incorporating a controllable diameter and c‐axis length on vertically aligned ZnO NRs, which is important in optimizing the design and functionality of electronic devices based on light absorption mechanism.     

Trans-Splicing Improvement by the Combined Application of Antisense Strategies

Spliceosome-mediated RNA trans-splicing has become an emergent tool for the repair of mutated pre-mRNAs in the treatment of genetic diseases. RNA trans-splicing molecules (RTMs) are designed to induce a specific trans-splicing reaction via a binding domain for a respective target pre-mRNA region. A previously established reporter-based screening system allows us to analyze the impact of various factors on the RTM trans-splicing efficiency in vitro. Using this system, we are further able to investigate the potential of antisense RNAs (AS RNAs), presuming to improve the trans-splicing efficiency of a selected RTM, specific for intron 102 of COL7A1. Mutations in the COL7A1 gene underlie the dystrophic subtype of the skin blistering disease epidermolysis bullosa (DEB). We have shown that co-transfections of the RTM and a selected AS RNA, interfering with competitive splicing elements on a COL7A1-minigene (COL7A1-MG), lead to a significant increase of the RNA trans-splicing efficiency. Thereby, accurate trans-splicing between the RTM and the COL7A1-MG is represented by the restoration of full-length green fluorescent protein GFP on mRNA and protein level. This mechanism can be crucial for the improvement of an RTM-mediated correction, especially in cases where a high trans-splicing efficiency is required.     

A new approach to evaluating the toxicity and genotoxicity of disinfected drinking water

The aim of this study was to evaluate the formation of toxic and genotoxic compounds in surface drinking waters treated with two widely used disinfectants, sodium hypochlorite (NaClO) and chlorine dioxide (ClO(2)), and a new disinfectant, peracetic acid (PAA). For this purpose a pilot plant was set up to add these biocides continuously to pre-filtered lake water flowing into three different basins. During three seasonal experiments, short-term in vivo tests (with plant, fish and molluscs) and in vitro tests (with bacteria, yeast and human cells) were carried out to evaluate the formation of genotoxic disinfection by-products (DBPs). Gas chromatography/mass spectrometry (GC/MS) was used to identify DBPs produced during the different treatments, microbiological analyses were performed to test the biocidal activity of the disinfectants, and chemical analyses were carried out to evaluate the quality of the water. The pilot drinking water plant under study was useful in studying the toxicity and genotoxicity of disinfected drinking water with this combined chemical/biotoxicological approach. This paper describes the setting up of the pilot plant and sets out/reports the results of the microbiological and chemical analyses.     

Sub-micrometer particulate air pollution and cardiovascular mortality in Beijing, China

Background

While the link between particulate matter and cardiovascular mortality is well established, it is not fully investigated and understood which properties of the aerosol might be responsible for the health effects, especially in polluted mega-city areas.

Objectives

Our goal was to explore the association between daily cardiovascular mortality and different particle metrics in the sub-micrometer range in Beijing, China.

Methods

We obtained daily counts of cause-specific cardiovascular deaths in the Beijing urban area for the period March 2004 to August 2005. Concurrently, continuous measurements of particle number size distributions were performed. Particle number concentrations (NC) between 0.003 μm and 0.8 μm were converted to particle mass and surface area concentrations assuming spherical particles. Semi-parametric Poisson regression models adjusting for trend, seasonality, day of the week, and meteorology were used to estimate immediate, delayed and cumulative particle effects. Additionally, effect modification by air mass origin was investigated.

Results

We observed associations between daily cardiovascular mortality and particle NC for a 2-days delay. Moreover, nearly all particle metrics showed 2-days delayed associations with ischemic heart disease mortality. The strongest association was found for particle NC in the size range 0.03-0.1 μm (7.1% increase in daily mortality with a 95%-confidence interval of 2.9%-11.5%, per an increase of 6250 particles/cm³). Results for surface and mass concentrations with a lag of two days indicated effect modification by air mass origin, whereas effects of particle NC were not modified.

Conclusions

Results show an elevated risk of cardiovascular mortality in Beijing from short-term exposure to particulate air pollution in the sub-micrometer range. Results also indicate that locally produced smaller particles and regionally transported particles may exhibit different effects in Beijing.     

Cultural biases in migration: Estimating non‐monetary migration costs

We monetize the cost for moving to a culturally different location. We combine administrative social security panel data with a proxy for cultural difference based on historical dialect dissimilarity between German counties. Conditional on geographic distance and pre‐migration wage profiles, we find that migrants demand a (indexed with respect to local rents) wage premium of about 1 (1.5) per cent for overcoming one standard deviation in cultural dissimilarity. The effect is driven by males and those who earn above average occupational wages before migration, and more pronounced for geographically short moves.     

What the American Institute of Planners Expects From the National Housing Conference

Planning initiative on the part of individual groups and communities within urban areas has been made necessary by the increasing bureaucratization and technical basis of decisions in current urban society. The efforts of advocate planners to represent these groups are made difficult because of their frequent lack of homogeneity, community feeling, and common interests in action. The treatment of local areas as “communities” of homogeneous interests can result in severe damage to the interest of their weakest inhabitants. Further, it is difficult to draw low-income families into the framework of planning, and to evoke their concern for the planning issues normally posed by the local establishment. Thus it is necessary to carefully generate viable issues in the work and maintain a consciousness of the interrelation of technical and political matters at all levels. The advocate planner's need to evoke and formulate issues maizes him dangerously similar to other manipulators of the poor's interests. One of the most difficult kinds of issues is the type like transportation which, although generated at the community level, must be studied and argued at the metropolitan scale with the consequent loss of a clearly identified client group. Advocacy planning takes many forms depending on its sponsorship. In spite of its problems, it fills a crucial need for managing latent conflict in the cities and for humanizing public action.     

Removal of emerging contaminants of concern by alternative adsorbents

The effective removal of emerging contaminants of concern (ECCs) such as endocrine-disrupting chemicals, pharmaceutically active compounds, personal care products, and flame retardants is a desirable water treatment goal. In this study, one activated carbon, one carbonaceous resin, and two high-silica zeolites were studied to evaluate their effectiveness for the removal of an ECC mixture from lake water. Adsorption isotherm experiments were performed with a mixture of 28 ECCs at environmentally relevant concentrations (200–900 ng/L). Among the tested adsorbents, activated carbon was the most effective, and activated carbon doses typically used for taste and odor control in drinking water (<10 mg/L) were sufficient to achieve a 2-log removal for most of the tested ECCs. The carbonaceous resin was less effective than the activated carbon because this adsorbent had a smaller volume of pores in the size range required for the adsorption of many ECCs (6–9 Å). For the removal of ECC mixture constituents, zeolites were less effective than the carbonaceous adsorbents. Because zeolites contain pores of uniform size and shape, a few of the tested ECCs with matching pore size/shape requirements were well removed, but the adsorptive removal of others was negligible, even at zeolite doses of 100 mg/L. The results of this study demonstrate that effective adsorbents for the removal of a broad spectrum of ECCs from water should exhibit heterogeneity in pore size and shape and a large pore volume in the 6–9 Å size range.