A reflection ansatz for surfaces with electrically small radii of curvature

Uniform reflection coefficients are developed for two- and three-dimensional, edge-like, perfectly conducting surfaces in the deep lit region. The uniformity is with respect to the electrical size of the radii of curvature at the surface's specular point. This uniformity allows one to physically interpret the reflected field from a smooth surface as one of the radii of curvature approaches zero as a diffracted field. The coefficients are heuristically generated from the exact scattered field for a two dimensional parabolic cylinder with plane wave illumination. The significant variables in this solution are the radii of curvature at the specular point and the distance between the specular point and the incident shadow boundaries in the principal planes. The field prediction accuracy of these reflection coefficients are critically examined through comparisons with reflected fields extracted from scattered fields of canonical surfaces.     

Feasibility of compact ranges for near-zone measurements

The purpose of this paper is to demonstrate the feasibility of using compact range reflector systems to make near-zone radiation or scattering measurements. This can be achieved by designing the compact range to provide a uniform spherical wave incident upon the antenna or scatterer under test. The basic design technique is demonstrated using the Scientific Atlanta reflector system which has been modified by adding an elliptic rolled edge to improve the uniformity of the incident wave. The near-zone range design is validated (from around 50 ft range to the far zone) by probing the field in the measurement volume and by comparing measured backscattering patterns from a circular cylinder with those calculated by the geometrical theory of diffraction (GTD). All the advantages of a conventional far-zone compact range are now made available by our demonstrated variable-zone (adjustable continuously from 50 ft to infinity) compact range.     

Heifer fertility and its relationship with cow fertility and production traits in Holstein dairy cattle

Breeding receipts from three AI units were merged with Ontario Dairy Herd Improvement Corporation and Record of Performance production records. Data comprised 53,705 heifer, 41,253 lactation 1, 14,688 lactation 2, and 3054 lactation 3 records by daughters of 2150 sires represented in 15,877 herd-year-seasons of birth. Three measures of heifer fertility, three measures of cow fertility, and three measures of production were investigated. Measures of heifer fertility were ages at first and last breeding and number of inseminations per conception. Cow fertility traits were days from calving to first breeding, days open, and number of inseminations per conception. Production traits were breed class average milk, breed class average fat, and fat percentage. Relationships among these nine traits for the first three lactations were estimated using a maximum likelihood multiple-trait procedure. The linear mixed model for each trait included fixed effects of herd-year-season of birth and genetic groups of sire and the random effect of sire. Transformations of the data for nonnormality had no influence on the estimates of genetic and phenotypic parameters. The heritability of .12 for age at first insemination, which was higher than other heifer fertility traits, indicated that selection would result in genetic response. Genetic and phenotypic correlations between heifer fertility and cow fertility and production traits in all three lactations were not different from zero. There was no genetic antagonism between fertility and subsequent production traits.     

Dinitrochlorobenzene contact hypersensitivity as a marker trait for selection to improve disease resistance in calves

Measurements of double skin fold thickness (mm) were used to assess the feasibility of use of cutaneous delayed-type hypersensitivity response as a marker trait to select for genetically improved disease resistance. Data were from a sample of 149 7-wk-old Holstein calves, from 15 sires, that previously had been sensitized to the contact allergen dinitrochlorobenzene. Response was monitored 24 and 48 h postchallenge. Analysis was by least squares according to a model that included fixed managerial effects, disease prevalence, and severity categories and sire of calf. Double skin fold thickness increased about 50% by 24 h, followed by a 4% decrease between 24 and 48 h. Season of birth was the only consistently significant fixed effect. Calves born in fall showed larger skin changes at each stage of response than calves born in spring. Restricted maximum likelihood estimates of paternal half-sib heritability were moderate to high for all stages of response, and phenotypic and genetic correlations between stages were significant and positive. Although the prevalence and severity of naturally occurring pneumonia and diarrhea did not significantly affect quantity of response, there is need to study further this relationship for intracellular pathogens. Delayed-type hypersensitivity response to dinitrochlorobenzene can meet requirements for a successful marker on which to base sire selection for disease resistance, if it is related to economically important, intracellularly characterized, pathogenic bovine diseases.     

Treatment of dairy cows with recombinant bovine somatotropin: genetic and phenotypic aspects

Thirty-four multiparous and primiparous Holstein cows were utilized to examine the association between the response to long-term administration of recombinant bovine somatotropin and the cow's phenotypic and genetic production potential. Cows representing a range of phenotypic and genetic production potentials were assigned to one of four treatment groups: 0, 12.5, 25.0, or 50.0 mg recombinant bovine somatotropin daily. They were injected daily for 266 d beginning on d 24 to 35 postpartum. Pretreatment milk and fat yields were used to predict daily yields over the lactation and allowed treatment groups to serve as their own controls. Actual minus predicted yield estimated the response to treatment for milk, fat, and FCM for each cow. Milk composition (fat, protein, and lactose percentage) was not significantly affected by treatment. Response in yield for milk, fat, and FCM was significant during the treatment period (266 d). Milk yield increased by 18.5, 19.9, and 21.4%; fat yield increased by 13.4, 20.3, and 18.1%; and FCM increased by 16.3%, 19.7%, and 21.1% after receipt of 12.5, 25.0 and 50.0 mg recombinant bovine somatotropin, respectively. Differences in response were not significant. The dramatic effect recombinant bovine somatotropin has on production requires that alternative approaches be adopted in the future for accurate genetic evaluation of sires and dams if somatotropin is discriminantly used in the national herd.     

Antibody responses to human erythrocytes and ovalbumin as marker traits of disease resistance in dairy calves

Microhemagglutination procedures were used to quantify antibody titers against human erythrocytes and ovalbumin in calf sera. Calves were also monitored for the prevalence of pneumonia and diarrhea. Calves, 72 males and 82 females, were the progeny of 15 AI bulls. Blood was sampled weekly for 2 wk after primary and secondary immunizations. Antibody response peaks to both antigens occurred by 14 and 7 d postimmunization, respectively. There were significant effects of season and birth and location of rearing on antibody titers against both test antigens. Diarrhea prevalence was negatively associated with high primary response antibody titers against human erythrocytes, but no trends were observed for pneumonia prevalence and for antibody titers to ovalbumin. Paternal half-sib heritability estimates ranged from 0 to .40 +/- .32 for primary antibody responses and from 0 to .87 +/- .50 for secondary antibody responses, depending on antibody specificity, and those for average titer were higher for antiovalbumin antibody (h2 = .48 +/- .39) than for antihuman erythrocyte antibody (h2 = .31 +/- .21). Although the environmental component of the humoral immune response is substantial, heritabilities of the magnitude in this study suggest the feasibility for successful genetic manipulation of antibody response profiles of young calves, and these may contribute to enhanced disease resistance.     

Enhanced compact range reflector concept using an R-card fence:two-dimensional case

Compact range reflector edge diffraction can be reduced by using an R-card fence. Well-designed R-cards (resistive sheets) placed in front of reflector edges reduce the field variations in the test zone. The keys to successful R-card design are proper choices of both the geometry and resistance profile. In this paper, a two-dimensional (2-D) version of the problem is attacked to show the basic concepts and essential considerations in designing R-cards. The complexity of a design is simplified by separating the different mechanisms associated with R-cards. Undesired mechanisms can be visualized by ray tracing and then eliminated by choosing the correct R-card geometry. The useful impact of this treatment is illustrated as it controls the transmitted energy level through the R-card; thus, the resistance of the R-card is defined based on an optimum aperture taper. Excellent performance in both the cross-range and down-range directions is presented, and the validity of the design is verified over a wide band of frequencies. The simplicity, flexibility, and low cost of this R-card fence concept provides a viable alternative to other edge treatments     

A method to design blended rolled edges for compact rangereflectors

A method to design blended rolled edges for compact range reflectors with arbitrary rim shape is presented. The reflectors may be center-fed or offset-fed. The method leads to rolled edges with minimal surface discontinuities. It is shown that the reflectors designed using the prescribed method can be defined analytically using simple expressions. A procedure to obtain optimum rolled parameters is also presented. The procedure leads to blended rolled edges that minimize the diffracted field emanating from the junction between the paraboloid and the rolled edge surface while satisfying certain constraints regarding the reflector size and the minimum operating frequency of the system     

An aperture-matched compact range feed horn design

The moment method and the uniform geometrical theory of diffraction are used to obtain two separate solutions for theE-plane far field pattern of an aperture-matched horn antenna. This particular horn antenna consists of a standard pyramidal horn with the following modifications: a rolled edge section attached to the aperture edges and a curved throat section. The resulting geometry provides significantly better performance in terms of the pattern, impedance, and frequency characteristics than normally obtainable. The moment method is used to calculate theE-plane pattern and voltage standing-wave ratio (VSWR) of the antenna. However, at higher frequencies, the moment method requires large amounts of computation time. On the other hand, the uniform geometrical theory of diffraction provides a quick and efficient high frequency solution for theE-plane field pattern. In fact, the uniform geometrical theory of diffraction may be used to initially design the antenna; then the moment method may be applied to "fine tune" it. In both methods, a two-dimensionalE-plane model of the antenna is used, but these two-dimensional solutions yield excellent agreement with measured data of the actual three-dimensional antenna. This procedure has been successfully applied to design a compact range feed horn.     

Scattering from a finite length rod with endpoint contribution

A uniform, high frequency analysis for calculating scattering from thin, finite length cylinders is presented. The cylinder diameter is assumed to be small (on the order of a wavelength or less) so that the modal solution is valid. The total field consists of the incident field, the scattered field from the specular point, and two endpoint contributions. A thin wire tip diffraction coefficient (TDC) is developed for calculating the end point contributions. The incident fields are those of a spherical source radiating throughout space. While the specularly scattered field and end point contributions are discontinuous, these discontinuities cancel each other, resulting in a uniformly continuous total field. Good agreement is obtained between measured and calculated results.