Authenticity green coffee bean species and geographical origin using near-infrared spectroscopy combined with chemometrics

To prevent the adulteration of agricultural resources and provide a solution to enhance the green coffee bean supply chain, authentication using the near-infrared spectroscopy (NIRS) technique was investigated. Partial least square with discrimination analysis (PLS-DA) models combined with various preprocessing methods were built from NIR spectra of 153 Vietnamese green coffee samples. The model combined with the standard normal variate and the first order of derivative yielded excellent performance in predicting coffee species with the error cross-validation of 0.0261. PLS-DA model of mean centre and first-order derivative spectra also yielded good performance in verifying geographical indication of green coffee with the error of 0.0656. By contrast, the predicting abilities of post-harvest methods were poor. The overall results showed a high potential of the NIRS in online authentication practices.     

First Harmonic (2f) Characterisation of Resonant Frequency and Q-Factor of Micromechanical Transducers

In this paper, the response to the first harmonic component (2f) of the electrostatic force in single terminal driven electrostatic comb-drive and parallel-plate drive was used as a signal to extract device parameters, namely, the Q-factor and resonant frequency instead of the fundamental (1f) resonance response. It is shown that the difficulty in motional measurement due to electrical cross-talk (parasitics) using 1f measurement can be overcome with a higher signal-to-noise ratio of the 2f signal. Both atmospheric (low-Q) and reduced pressure environment were investigated using off-chip electronics and lock-in amplifier. The measurements were done on the electrostatic comb-drive and capacitive parallel plate sensing plates that form the two core modules of a yaw rate sensor (dual-axis resonator). The effects of AC and DC bias voltages on the measured response have been investigated. Experimental amplitude and phase response data have been analysed using the Lorentzian curve-fit, Resonance Curve Area (RCA) method, the half-power bandwidth method (3 dB) and the Nyquist plot for data fitting and determination of the Q-factor and resonance frequency.     

Efficient fine granularity scalability using adaptive leaky factor

Fine Granularity Scalability (FGS) video coding has been adopted by the MPEG-4 standard for video streaming applications. In this paper, we propose a novel FGS coding scheme, which applied adaptive leaky factors for the enhancement layer prediction to further improve the coding efficiency of FGS. A flexible method that can dynamically determine the leaky factors according to the network conditions is also presented. With the proposed method, a better trade-off between the coding efficiency and drifting reduction can be achieved, and the coding performance is further improved compared with using a fixed leaky factor. Experimental results show that the proposed method can further improve the coding efficiency over a wide range of bitrate and packet loss ratio, and still keep the original characteristics, such as fine granularity, and bandwidth adaptation.     

Hot-carrier degradation of submicrometer p-MOSFETs withthermal/LPCVD composite oxide

It is shown that while gate oxides containing thermal/LPCVD composite oxide have lower defect densities than gates using only thermal oxides, they are more susceptible to hot-carrier degradation. The hot-carrier-induced degradation of composite oxides is worse in p-channel MOSFETs than in n-channel MOSFETs. This sensitivity of p-channel MOSFETs is caused by higher electron trapping levels in LPCVD oxides. For 150-Å gate technology, the hot-carrier-degradation resistance of thermal/LPCVD composite gate oxides with a 70-Å or thicker thermal oxide layer approaches that of high-quality pure thermal oxide     

Surgical treatment and outcome in patients with a hepatocellular carcinoma greater than 10 cm in diameter

BACKGROUND: Hepatocellular carcinoma (HCC) over 10 cm in diameter at the time of diagnosis continues to account for a number of patients undergoing hepatic resection. This study evaluated the clinicopathological features and outcome following surgery for large HCC. METHODS: Forty patients with a large HCC (greater than 10 cm) (group 1) resected between 1991 and 1996 were studied retrospectively. They were compared with 245 patients who had smaller HCCs (10 cm or less) (group 2). RESULTS: No patient in group 1 had hepatitis C infection compared with 22.9 per cent in group 2 (P=0.001). Patients in group 1 were significantly younger, had higher alpha-fetoprotein levels (16750 versus 1864 ng/ml; P < 0.001), better liver function, a higher incidence of multiple tumours (27 of 40 versus 42.0 per cent; P=0.003) and venous invasion (35 of 40 versus 52.2 per cent; P < 0.001), and underwent more major resections (37 of 40 versus 26.5 per cent; P < 0.001) than those in group 2. Morbidity and mortality rates and hospital stay were comparable in the two groups. For group 1, the 1-, 3- and 5-year disease-free survival rates were 42, 30 and 28 per cent respectively. Multiple tumours, venous invasion and impaired liver function were factors associated with recurrence. CONCLUSION: Large HCC had specific clinicopathological features. In selected patients, resection is safe and offers the chance of long-term disease-free survival.     

Discovery of a novel tetrahydroacridine acetylcholinesterase inhibitor through an indexed combinatorial library

BACKGROUND: Methods for the rapid and efficient preparation of drug candidates through combinatorial chemistry are of increasing interest. We have previously reported an indexed combinatorial library method that allows both the preparation and testing of compounds in solution. We set out to apply this method to develop more effective analogs of the known, marketed drug tacrine, an acetylcholinesterase inhibitor. RESULTS: A one-step condensation of cyclohexanones with cyanoanilines to generate tetrahydroacridine pools was developed. The resulting library of (formally) 72 tetrahydroacridines was screened against acetylcholinesterase, and a compound 10-fold more potent than tacrine, 7-nitrotacrine, was discovered. Its increased potency could be readily explained by examining the known structure of the complex of acetylcholinesterase with tetrahydroacridine. CONCLUSIONS: In this work, we have provided a relatively rare example of carbon-carbon bond formation in a pool synthesis and have discovered a potentially useful acetylcholinesterase inhibitor.     

An effective hybrid approach of desirability,fuzzy logic,ANFIS and LAPO algorithm for optimizing compliant mechanism

This paper proposes an efficient hybrid approach for solving multi-objective optimization design of a compliant mechanism. The approach is developed by integrating desirability function approach, fuzzy logic system, adaptive neuro-fuzzy inference system, and Lightning attachment procedure optimization. Box–Behnken design is used to form a numerically experimental matrix. First, a refinement of design variables is conducted through analysis of variance and Taguchi approach in terms of considerably eliminating space of design variables and computation efforts. Next, desirability of two objective functions is computed and transferred into the fuzzy logic system. The output of fuzzy logic system is regarded as single combined objective function. Subsequently, a modeling for fuzzy output is developed via adaptive neuro-fuzzy inference system. Then, LAPO algorithm is adopted for solving the optimization problem. By investigating three different numerical examples, performance of the proposed approach is validated. Numerical results revealed that the proposed approach has a computational accuracy better than that of Taguchi-based fuzzy logic reasoning. Finally, case study 1 is chosen as an optimal solution for the mechanism. Furthermore, the effectiveness of proposed approach is greater than that of the Jaya algorithm and TLBO algorithm through Wilcoxon signed rank test and Friedman test. The proposed approach can be used for related engineering fields.

     

Study of the composition effect of glass ceramic and silver on poly(vinyl butyral) thermal degradation with thermogravimetric analysis

The thermal degradation of poly(vinyl butyral) (PVB)/glass ceramic, PVB/Ag, and PVB/glass ceramic/Ag composites was investigated with thermogravimetric analysis in nitrogen and air. Thermogravimetric data revealed that the compositions of both inorganic materials in air could greatly influence the thermal degradation of PVB. The degradation reactions of PVB/ceramic and PVB/Ag composites began earlier and accelerated rapidly at lower temperatures. The overall degradation period was obviously shortened for the thermal degradation of PVB/Ag in air, whereas a longer time was required for the PVB/ceramic composite than for PVB. Moreover, dual effects of ceramic and Ag on the thermal degradation of PVB were observed for PVB/ceramic/Ag composites. In addition, the catalytic effects of ceramic and Ag on the degradation reaction of PVB in air were verified with a kinetic analysis. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2142–2149, 2004