日本国保桥本市民医院工程简介

本文对日本国保桥本市民医院工程做一概述。     

Development of a new loading test apparatus for microfocus X-ray CT and its application to the investigation of soil behavior surrounding driven open-section piles

In recent years, X-ray CT scanners with task-specific modifications, such as microfocus and/or a synchrotron, have been widely implemented in a variety of fields, including medical and industrial fields. Since microfocus X-ray CT systems enable the visualization of whole samples, and also yield a relatively high resolution of the region of interest in the sample, they are commonly utilized in the fields of soil mechanics and geotechnical engineering. This paper describes a novel loading test apparatus that is specifically designed for microfocus X-ray CT systems capable of performing loading tests to investigate soil behavior during the installation of driven open-section piles. The loading tests were designed to take the micro-level spatial resolution of microfocus X-ray CT systems into account. Digital image correlation (DIC) is subsequently implemented to analyze the obtained CT images, making it possible for measurements to be taken of the displacement fields in the ground following installation of the model pile. Finally, the versatility of this novel test apparatus is proof of its high potential for application in different types of loading tests.     

Ozonated Mineral Oil: Preparation,Characterization and Evaluation of the Microbicidal Activity

The ozonation of vegetable oils has been studied, since the produced ointments have antibacterial and fungicidal activities. However, the ozonation of mineral oils has not been reported in the literature yet, opening an interesting field for examination. In this work, we have shown the ozonation of a commercial mineral oil (Nujol). The main goal was to produce oils containing free ozone, so that this gas could act as antimicrobial agent. It was found that in Nujol, ozone remains for at least 40 days and in the sample ozonized for 15 h its concentration was 7.5 mg mL^?1. Neat Nujol showed no antimicrobial activity against the tested microorganisms, however, when ozonated it showed antimicrobial activity against Enterococcus faecalis, Staphylococcus aureus and Escherichia coli.     

Electrochemical behavior of the Ti6Al4V alloy implanted by nitrogen PIII

Plasma surface treatments have been used very often to enhance the surface properties of metallic materials. In this work, Ti6Al4V titanium alloy was treated by nitrogen plasma immersion ion implantation (NPIII) in order to obtain improvements in its surface properties, such as corrosion resistance evaluated here. The microstructure and corrosion behavior of the implanted and unimplanted samples were evaluated, using, XRD, GDOES and potentiodynamic polarization and impedance electrochemical spectroscopy tests in 0.6 M NaCl solution. It was verified that the NPIII created resistant layers to corrosive attacks. In corrosion tests by polarization, the implanted samples showed corrosion current density reduction of about 10 times compared to the Ti6Al4V alloy without treatment. Besides that, it was also observed a reduction of the passive current density of one order of the magnitude. In all the studied cases, the polarization curves were shifted to more positive values of potentials, indicating a lower tendency of these PIII treated surfaces to corrosion. The implantation process produced a thin TiN surface layer followed by Ti₂N and then a layer with nitrogen in solid solution, all detected by GDOES combined with X-ray diffraction. These layers promoted an excellent polarization resistance of the Ti6Al4V surfaces on impedance spectroscopy tests also. This better performance in these tests can be correlated with the formation of continuous nitride layer, which could retard chloride ions ingress into the substrate.     

Initial Collection Performance of Resin Wool Filters and Estimation of Charge Density

Abstract

A new type of resin wool filter (RWF) that persists the load with oil droplets was developed by Kimura and colleagues. In the present work, the initial collection performances of RWF (A and C) are measured for various particle sizes (0.03, 0.05, 0.1, 0.15, 0.2, 0.25, and 0.3 μm) with different charging states at various filtration velocities (0.05, 0.1, 0.15, and 0.3 m/s). As a result, it is shown that the present RWF impregnated with PTBP resin can attain high collection efficiency (99.999% at filtration velocity of 0.05 m/s) with a pressure drop of less than 30 Pa. The charge density is estimated by applying prediction equations of single-fiber collection efficiencies of electret filters with a dipolar charge distribution because no other prediction equation for RWF are available at present. The experimental single-fiber efficiencies for uncharged particles are successfully predicted by assigning a single value of charge density in the prediction equations for dipolar fibers. The estimated charge density on RWF fibers is 2.1 × 10^{? 4} C/m², which is much higher than those of conventional electret filter media. Therefore, RWF studied in the present work is suitable for the application to respirators as well as room air cleaners.     

A quantitative analysis of a trace amount of hydrogen in high temperature heat-treated carbons

A technique to determine a trace amount of hydrogen in carbon materials heat-treated above 1000 °C was developed. Three types of carbons prepared from poly(furfulyl alcohol), poly(vinyl chloride) and mesophase carbon microbeads were heat-treated at various temperatures ranging from 1000 to 1800 °C. Then they were gasified by O₂ in a fixed bed flow reactor, and the H₂O gases formed during the gasification processes were carefully monitored with a Karl Fischer moisture analyzer. As a result, this method makes it possible to determine the hydrogen contents in the carbons down to three places of decimals as a weight percent and can detect even a trace amount of hydrogen as low as 0.002 wt.%. A possible chemical structure of carbon edge sites was also discussed based on the experimentally determined hydrogen contents.     

Curative laparoscopic surgery for early gastric cancer: five years experience

Sixty-one patients who were diagnosed with mucosal gastric cancer have been successfully treated with two laparoscopic techniques at our institute from March 1992 to March 1997. One is laparoscopic wedge resection of the stomach using a lesion-lifting method for lesions of the anterior wall, the lesser curvature, and the greater curvature of the stomach. The other is laparoscopic intragastric mucosal resection for lesions of the posterior wall of the stomach and near the cardia or the pylorus. Indications are as follows: (1) preoperatively diagnosed mucosal cancer; (2) <25 mm diameter elevated lesions; and (3) <15 mm diameter depressed lesions without ulcer formation. Patients were discharged in 4 to 8 days uneventfully. There was no major complication or mortality. The resected specimens had sufficient surgical margins horizontally (16 +/- 5 and 8 +/- 4 mm, respectively) and vertically. In one patient histologic examination revealed slight tumor infiltration into the submucosal layer with lymphatic invasion. He underwent gastrectomy with lymph node dissection 1 month after surgery. Otherwise, histologic examination revealed curative surgery. All patients in the series have survived during the 4- to 65-month follow-up period. There have been two recurrences in the series, both of which were found near the staple line 2 years after the initial surgery and were still mucosal lesions. They were successfully treated by open gastrectomy and laser irradiation. A separate early gastric cancer was found 2 years after the initial surgery in one patient, who then underwent curative open gastrectomy. In conclusion, if the patients are selected properly, these laparoscopic procedures are curative, minimally invasive treatment for early gastric cancer.