Experimental and Computational Chemistry Studies on the Inhibition Efficiency of Phthalic Acid (PHA) for the Corrosion of Aluminum in Hydrochloric and Tetraoxosulphate (VI) Acids

Protection of Metals and Physical Chemistry of Surfaces - In this work, phthalic acid is investigated for its corrosion inhibition properties (for aluminum in solutions of HCl and H2SO4) through...     

Visible transmission spectroscopy for the assessment of egg freshness

The objective of this research was to investigate the feasibility of visible transmission spectroscopy for the non‐destructive assessment of the freshness of an individual egg. A total of 600 intact white‐shelled eggs of the same flock (Lohmann, 40 weeks of age) were measured. To obtain a considerable variation in freshness, groups consisting of 60 eggs were stored (18 °C, 55% RH) for 0, 2, 4, 6, 8, 10, 12, 14, 16 and 18 days. The non‐destructive spectral measurements were compared with the two most widely used destructive freshness parameters, namely Haugh units and albumen pH. A partial least squares (PLS1) model was built in order to predict Haugh units and pH of the albumen based on the transmission spectra. The correlation coefficients between the predicted value and the measured value were 0.842 and 0.867 for Haugh unit and pH of the albumen, respectively. These results show that the light transmission spectrum of an egg provides quantitative information about egg freshness. Relevant information concerning egg freshness is restricted to the interval between 570 and 750 nm. Furthermore, the models obtained for both destructive parameters were strikingly similar, indicating that Haugh unit and pH have the same physico‐chemical background. Copyright © 2006 Society of Chemical Industry     

Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (111), Si (100) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disorder in the AIN films increased as determined by X-ray diffraction, FTIR and Raman spectroscopy. The preferred orientation of the film's c-axis changed from completely normal to the film at 100 V, to a mixture of normal and in the plane of the film at 200 V. For AIN films deposited under the same conditions, the films were more highly oriented on sapphire (0001) than in Si (111). The hardness of the films increased from 18.2 to 23.7 GPa with the nitrogen-beam voltage, and possible reasons for this change in hardness are considered.     

Virtual Teams: Guide to Successful Implementation

The successful initiation and execution of a virtual team is gaining increasing attention in the design and construction community. From opportunities to integrate international and multidisciplinary teams to the opportunity to leverage the best resources in an organization on a given project, virtual teams can transform the concept of project planning and execution. However, potential barriers exist in several areas to the successful implementation of virtual teams. The needs of increased management emphasis, social and cultural understanding, and emphasis on common goals are only a few of the nontechnical factors that can turn successful virtual teaming into virtual frustration. When combined with traditional technical challenges including compatibility of systems, security, and the selection of appropriate technologies, the line between leveraging virtual technologies for enhanced solutions and introducing additional complications into the project process is one that can be easily crossed. This paper presents the findings of research that addresses the opportunities and potential barriers to successful virtual teams in the engineering, procurement, and construction industry. Combining results from current research, industry practices, and early results from nonconstruction industries, the research findings provide an initial path to successful virtual team implementation.     

Comparison of a contactor catalytic membrane reactor with a conventional reactor: example of wet air oxidation

A wet air oxidation reaction was carried out in a gas/liquid catalytic membrane reactor of the contactor type. The oxidation of formic acid was used as a model reaction. The mesoporous top-layer of a ceramic tubular membrane was used as catalyst (Pt) support, and was placed at the interface of the gas (air) and liquid (HCOOH solution) phases.

A similar reaction was carried out in a conventional batch reactor, using a steering rate high enough to avoid gas-diffusion limitations, and exactly identical conditions than for the CMR (amount of catalyst, pressure, etc.). At room temperature, the CMR showed an initial activity three to six times higher than the conventional reactor. This activity increase was attributed to an easier oxygen access to the catalytic sites. Nevertheless, the catalytic membrane gradually deactivated after a few hours of operation. Different deactivation mechanisms are presented.     

Redox and pH Dual Responsive Polymer Based Nanoparticles for In Vivo Drug Delivery

Responsive nanomaterials have emerged as promising candidates as drug delivery vehicles in order to address biomedical diseases such as cancer. In this work, polymer‐based responsive nanoparticles prepared by a supramolecular approach are loaded with doxorubicin (DOX) for the cancer therapy. The nanoparticles contain disulfide bonds within the polymer network, allowing the release of the DOX payload in a reducing environment within the endoplasm of cancer cells. In addition, the loaded drug can also be released under acidic environment. In vitro anticancer studies using redox and pH dual responsive nanoparticles show excellent performance in inducing cell death and apoptosis. Zebrafish larvae treated with DOX‐loaded nanoparticles exhibit an improved viability as compared with the cases treated with free DOX by the end of a 3 d treatment. Confocal imaging is utilized to provide the daily assessment of tumor size on zebrafish larva models treated with DOX‐loaded nanoparticles, presenting sustainable reduction of tumor. This work demonstrates the development of functional nanoparticles with dual responsive properties for both in vitro and in vivo drug delivery in the cancer therapy.     

Thermal performance indicators for refrigerated road vehicles

An experimental evaluation of insulation effectiveness, pull-down times and effectiveness of a mechanical refrigeration unit was performed on five refrigerated panel vans. Additionally, a mapping of temperature variability in the cargo space was carried out during a simulated journey encompassing several door openings. The temperature variability measured in the vans was neither correlated to the effectiveness of the insulation nor the time required to achieve complete cooling of the cargo space. These criteria are common thermal performance indicators used to evaluate refrigerated vehicles in international standards. The efficiency of insulation was correlated to the pull-down times, presenting the possibility of calculating the former as a function of the latter. The temperature variability was correlated with the time required for the unit to recover temperature control after a door opening and the difference between the maximum and minimum temperatures reached during a door opening cycle.     

Efficient and scalable omniscient debugging for model transformations

This paper discusses a technique for supporting omniscient debugging for model transformations, which are used to define core operations on software and system models. Similar to software systems developed using general-purpose languages, model transformations are also subject to human error and may possess defects. Existing model-driven engineering tools provide stepwise execution to aid developers in locating and removing defects. In this paper, we describe our investigation into a technique and associated algorithms that support omniscient debugging features for model transformations. Omniscient debugging enables enhanced navigation and exploration features during a debugging session beyond those possible in a strictly stepwise execution environment. Finally, the execution time performance is comparatively evaluated against stepwise execution, and the scalability (in terms of memory usage) is empirically investigated.     

MnO2-Based Electrochemical Supercapacitors on Flexible Carbon Substrates

Manganese dioxide films were grown on large area flexible carbon aerogel substrates. Characterization by x-ray diffraction confirmed α-MnO₂ growth. Three types of films were compared as a function of hexamethylenetetramine (HMTA) concentration during growth. The highest concentration of HM TA produced MnO₂ flower-like films, as observed by scanning electron microscopy, whose thickness and surface coverage lead to both a higher specific capacitance and higher series resistance. Specific capacitance was measured to be 64 F/g using a galvanostatic setup, compared to the 47 F/g-specific capacitance of the carbon aerogel substrate. Such supercapacitor devices can be fabricated on large area sheets of carbon aerogel to achieve high total capacitance.