Shape Factor Effect on Inclusion Sedimentation in Aluminum Melts

Metallurgical and Materials Transactions B - The quality requirements of aluminum products are steadily increasing, and the presence of non-metallic inclusions have a large impact on the quality of...     

Study of direct and indirect naphtha recycling to a resid FCC unit for maximum propylene production

To satisfy the increasing propylene demand, direct and indirect naphtha recycling schemes around an existing resid fluid catalytic cracking (FCC) unit were investigated. To this aim, light cracked naphtha (LCN), heavy cracked naphtha (HCN) and a PolyNaphtha (PN) oligomerisation product were cracked under a wide range of operating conditions over a commercial Y zeolite based equilibrium catalyst. Experimental data were acquired in three different units: a fixed bed bench scale unit, a fixed fluidised bed unit and an adiabatic circulating fluidised bed pilot plant. It was shown that FCC naphthas require high operating severities to crack, and that even then their conversion remains relatively moderate. Hence, direct recycling to the main riser does not seem a viable pathway to increase propylene product. Feeding FCC naphthas to a second reaction zone operating at high severity allows to increase the propylene yield in a significant manner. Increasing conversion, however, not only leads to higher LPG and propylene yields, but also results in very high dry gas yields. An alternative scheme was proposed, in which the olefinic C₄ and C₅ fractions are converted into a naphtha fraction through oligomerisation in a dedicated unit before being recracked in the secondary riser. As the highly olefinic oligomerised effluent mainly consist of dimerised and trimerised butenes and pentenes, this feed is more easily cracked and high conversions can be achieved. This indirect interconversion of butenes and pentenes into propylene therefore effectively allows to convert these butenes and pentenes into propylene, resulting in a significant increase in propylene yield. Each of the three main naphtha recycle options (directly to the main riser, directly to a secondary riser or indirectly via a light olefin oligomerisation unit) have been analysed and compared to a base case. In the evaluation of each of these schemes, all heat balance effects, both on the riser and the regenerator side, have been accounted for. The proposed process scheme with an indirect recycle via an oligomerisation unit enhances the already inherent flexibility of the FCC unit. The naphtha recycle can be turned on or off, the second reaction zone can be used to crack naphtha or to crack resid feed to maximise throughput, while the effluent of the oligomerisation unit can be recycled to the FCC unit for propylene production or hydrogenated and sent to gasoline and kerosene pool.     

Chronic Q fever. Ninety-two cases from France, including 27 cases without endocarditis

OBJECTIVE: Chronic Q fever is seldom recognized; before 1989, only 234 cases had been reported in the literature. The 92 cases of chronic Q fever collected at the French National Reference Center for Rickettsioses from 1982 through 1990 represent the largest series ever reported. PATIENTS: The patients included in the study were diagnosed between July 31, 1982, and August 1, 1990, at the French National Reference Center for Rickettsioses as having chronic Q fever by the following criteria: presence of antibody against Coxiella burnetii phase I antigen at a titer greater than or equal to 800 for IgG and 50 for IgA by the indirect immunofluorescence test. Epidemiologic, clinical, laboratory, and treatment data were collected from 39 different collaborative hospitals throughout France. MAIN OUTCOME MEASURE: For each serologically selected patient, a computerized questionnaire was utilized to record 188 different items of demographic, epidemiologic, clinical, laboratory, and therapeutic data, which were analyzed. RESULTS: Chronic Q fever occurs more frequently in city dwellers than in rural inhabitants, and exposure to domestic ruminants and raw milk is an important feature. Immunocompromising conditions (20.2%) and underlying heart disease (88.4%) or vascular disease are the most important risk factors to consider in potential cases of chronic Q fever. The mortality in these patients with endocarditis was high (23.5%). The clinical spectrum of 84 patients included 57 cases of endocarditis, three cases of vascular prosthesis infection, three cases of aneurysmal infection, three cases of osteoarthritis, four cases with lung localizations, nine asymptomatic cases, three cases of hepatitis, and two cases with cutaneous forms of the disease. CONCLUSIONS: In patients with unexplained fever, negative blood cultures, and a history of underlying vascular or cardiac disease, Q fever should be considered.     

Les enjeux économiques de ľinterconnexion des réseaux

The network interconnection and its regulation consist in solving the following dilemma: increase competition and preserve the universal service through access charges, which symbolizes today institutional organization within the telecommunication industry. This paper presents some of the economic and social factors that drive the interconnection policies namely ona (open network architecture) in the United States, or onp (open network provision) in Europe. In the first section, we list some social and economical issues related to open network policies. In the second section, we study the different answers brought up by the regulator through alternative interconnection price formulas. In conclusion, we discuss the stakes and risks of interconnection, while the technological evolution of network introduces intelligent software in switching équipement and implements the tremendous abilities of the digital broadband networks.     

The forward muon detector of the DELPHI experiment at LEP

The layout and construction of the muon drift chambers equipping the end caps of the DELPHI detector are described. The performance of this forward muon detection system, determined from cosmic ray tests and data collected during the first year of LEP operation, is presented.     

Visually guided locomotion, distractibility, and the missing-stimulus effect in hooded rats with unilateral or bilateral lesions of parietal cortex.

When hooded rats with bilateral lesions of Krieg's Area 7 (parietal cortex) were trained to locomote toward visual targets in a runway, they ran less accurately than did controls, although unilaterals ran accurately. When flashing lights were presented unexpectedly during their run, bilateral parietals were less disrupted than were controls, but they failed to show total neglect. Unilateral parietals turned toward distracters on either side but turned preferentially toward distracters contralateral to the intact hemisphere, particularly when distracters occurred bilaterally and simultaneously. Effects due to the omission of expected distracters were similar in parietals and controls. Rat parietal cortex is not essential for the redirection of attention to stimuli notable for their unexpected presence or absence, but parietal cortex may resolve interhemispheric competition. Results suggest a homology between parietal cortex in rat and primate. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cationic ring-opening polymerization of hexamethylcyclodisilazane: General aspects and tentative mechanisms

The ring-opening polymerization of hexamethylcyclodisilazane (D_2NMe), initiated by methyl triflate in 1,2-dichloroethane, forms in the first, fast kinetic step both linear polymer and cyclic dimer (D_4NMe). Subsequently a slow depolymerization process occurs leading to exclusively cyclotrisilazane (D_3NMe). On the basis of kinetic measurements carried out using an adiabatic calorimetric technique and complementary experiments, mechanisms of both propagation, cyclization and back-biting reactions are proposed. The influence of the reaction temperature was also studied; it is demonstrated that, at low temperature, polymerization does not lead to cyclic oligomer formation. In such conditions, the polymerization presents a ‘living’ character.     

Ring-opening polymerization of decamethylcyclopentasiloxane initiated by a superbase: Kinetics and rheology

The use of phosphazene bases in combination with water was proved to be efficient in order to obtain polysiloxane polymers from cyclic monomers. Only a few minutes are necessary to obtain polymer chains with a monomer concentration of 5% at the equilibrium. For that purpose the space which is between a rheometer's plates is the most convenient device to monitor this reaction concerning a chemical and viscoelastic point of view. Therefore, here is proposed a chemo-rheology study that leads in the same time to the chemical kinetics equations and to the variation of the viscoelastic functions during the polymerization. In this way different catalysts are used and their efficiencies are compared as a function of their “basicity tank”. Whatever the experimental conditions involved are, viscosity versus polymer concentration or conversion shows a master curve for catalysts suitable to be used under extrusive conditions. Thus, only a few experiments are needed in order to develop a model which can be used to foresee the variation of the viscosity during the reaction.     

A simple footskate removal method for virtual reality applications

Footskate is a common problem encountered in interactive applications dealing with virtual character animations. It has proven difficult to fix without the use of complex numerical methods, which require expert skills for their implementations, along with a fair amount of user interaction to correct a motion. On the other hand, deformable bodies are being increasingly used in virtual reality (VR) applications, allowing users to customize their avatar as they wish. This introduces the need of adapting motions without any help from a designer, as a random user seldom has the skills required to drive the existing algorithms towards the right solution. In this paper, we present a simple method to remove footskate artifacts in VR applications. Unlike previous algorithms, our approach does not rely on the skeletal animation to perform the correction but rather on the skin. This ensures that the final foot planting really matches the virtual character’s motion. The changes are applied to the root joint of the skeleton only so that the resulting animation is as close as possible to the original one. Eventually, thanks to the simplicity of its formulation, it can be quickly and easily added to existing frameworks.