Bovidae-based gelatin: Extractions method,physicochemical and functional properties,applications, and future trends

Gelatin is one of the most important multifunctional biopolymers and is widely used as an essential ingredient in food, pharmaceutical, and cosmetics. Porcine gelatin is regarded as the leading source of gelatin globally then followed by bovine gelatin. Porcine sources are favored over other sources since they are less expensive. However, porcine gelatin is religiously prohibited to be consumed by Muslims and the Jewish community. It is predicted that the global demand for gelatin will increase significantly in the future. Therefore, a sustainable source of gelatin with efficient production and free of disease transmission must be developed. The highest quality of Bovidae-based gelatin (BG) was acquired through alkaline pretreatment, which displayed excellent physicochemical and rheological properties. The utilization of mammalian- and plant-based enzyme significantly increased the gelatin yield. The emulsifying and foaming properties of BG also showed good stability when incorporated into food and pharmaceutical products. Manipulation of extraction conditions has enabled the development of custom-made gelatin with desired properties. This review highlighted the various modifications of extraction and processing methods to improve the physicochemical and functional properties of Bovidae-based gelatin. An in-depth analysis of the crucial stage of collagen breakdown is also discussed, which involved acid, alkaline, and enzyme pretreatment, respectively. In addition, the unique characteristics and primary qualities of BG including protein content, amphoteric property, gel strength, emulsifying and viscosity properties, and foaming ability were presented. Finally, the applications and prospects of BG as the preferred gelatin source globally were outlined.     

Studies on influence of hydrogen and carbon monoxide concentration on reduction progression behavior of molybdenum oxide catalyst

Temperature programmed reduction (TPR) analysis was applied to investigate the chemical reduction progression behavior of molybdenum oxide (MoO₃) catalyst. The composition and morphology of the reduced phases were characterized by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). The reduction progression of MoO₃ catalyst was attained with different reductant types and concentration (10% H₂/N₂, 10% and 20% CO/N₂ (%, v/v)). Two different modes of reduction process were applied. The first approach of reduction involved non-isothermal mode reduction up to 700 °C, while the second approach of reduction involved the isothermal mode reduction for 60 min at 700 °C. Hydrogen temperature programmed reduction (H₂-TPR) results showed the reduction progression of three-stage reduction of MoO₃ (Mo⁶⁺ → Mo⁵⁺ → Mo⁴⁺ → Mo⁰) with Mo⁵⁺ and Mo⁴⁺. XRD analysis confirmed the formation of Mo₄O₁₁ phase as an intermediate phase followed by MoO₂ phase. After 60 min of isothermal reduction, peaks of metallic molybdenum (Mo) appeared. Whereas, FESEM analysis showed porous crater-like structure on the surface cracks of MoO₂ layer which led to the growth of Mo phase. Meanwhile, the reduction of MoO₃ catalyst in 10% carbon monoxide (CO) showed the formation of unstable intermediate phase of Mo₉O₂₆ at the early stage of reduction. Furthermore, by increasing 20% CO led to the carburization of MoO₂ phase, resulted in the formation of Mo₂C rather than the formation of metallic Mo, as confirmed by XPS analysis. Therefore, the presented study shows that hydrogen gave better reducibility due to smaller molecular size, which contributed to high diffusion rate and achieved deeper penetration into the MoO₃ catalyst compared to carbon monoxide reductant. Hence, the reduction of MoO₃ in carbon monoxide atmosphere promoted the formation of Mo₂C which was in agreement with the thermodynamic assessment.     

Thermo-protective properties of polymer composites with nano-titanium dioxide

International Journal of Mechanics and Materials in Design - The present work investigates the ablative and thermal properties of an epoxy resin which was modified with titanium dioxide...     

Dynamic Analysis of Truss‐Beam System

As the manned exploration of space continues, many complex structural components are being developed to construct the orbital platforms that will be used to house communication hardware, personnel, and manufacturing complexes. These components are extremely flexible and complex in their behavior. There is a need for a simple method for determining the dynamic characteristics of these space structures with a minimum of effort. A mathematical model of one of these structural elements, an articulating truss beam, has been developed to predict its dynamic response. Assumptions of the force interaction between the beam elements and the joints have been made for using this model. Algorithms are provided to determine the flexibility matrix of the truss beam for use in the equation of motion. The natural frequencies obtained from using this method are compared with those obtained by the finite element method. An experimental procedure is planned to validate the results from the theoretical method.     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

Evaluation of simple dynamic models and controllers for hydraulic and nozzle pressure in injection molding

Simple pseudo-steady state relations between the hydraulic and nozzle pressures of an injection molding machine were presented and verified experimentally. A simulation study was performed to evaluate the performance of simple controllers using dynamic models developed for the hydraulic and nozzle pressures. The controllers chosen were the discrete proportional, proportional-integral (PI), and proportional-integral-derivative (PID) types, tuned according to the ITAE criterion. The control of hydraulic pressure simulation showed that the PI controller had the best overall performance, whereas the result of nozzle pressure control loop simulation showed that the PID controller performance was better than that of the PI controller. All the controllers, in both loops, gave responses that were about an order of magnitude more rapid than the open loop response.     

Terson''s syndrome in a patient with acute promyelocytic leukemia on all-trans retinoic acid treatment

Hypothermia induced by surface cooling has shown to protect vulnerable regions of the brain during an ischemic insult. This study evaluated the neuroprotective efficacy of neurotensin, a potent hypothermic agent, using a 5-min carotid occlusion procedure in the gerbil. In Experiment 1, the dose-response and time course of neurotensin-induced hypothermia were evaluated (n = 5/dose). Central infusion of 10, 20, and 30 micrograms neurotensin were found to significantly decrease core body temperature of conscious gerbils within 30 min of administration. In Experiment 2, gerbils pretreated with 30 micrograms neurotensin were permitted to become hypothermic or were maintained at 37 degrees-38 degrees C (rectal) during ischemic insult. Other gerbils were pretreated with peptide vehicle prior to ischemic insult (at 37 degrees -38 degrees C) or underwent a sham procedure (n = 6/condition). At 24 h after surgery, gerbils were tested for increased locomotor activity in an open-field apparatus. Gerbils pretreated with peptide vehicle or neurotensin and maintained at 37 degrees-38 degrees C during ischemia had significantly higher activity levels compared to the other treated groups. In contrast, gerbils made hypothermic with neurotensin exhibited activity levels similar to sham gerbils. Histological assessment revealed that neurotensin-induced hypothermia protected the CA1 region from ischemic damage.