Development and evaluation of sub-element testing of SiC/SiC ceramic matrix composites at elevated temperatures

SiC/SiC ceramic matrix composites (CMCs) are being developed for use in aero-engines to replace nickel superalloy components. Sub-element testing acts as the key stepping stone in bridging understanding derived from basic coupon testing and more complex component testing. This study presents the development of high temperature C-shape sub-element testing with the use of digital image correlation to study damage progression. The specimen is designed with a bias towards a mixed mode-stress state more similar to what a CMC component may see in service. Both monotonic and fatigue tests were completed on C specimens and compared with predicted behaviour from modelling. Test data from both test types suggested that specimens were failing once they reached a critical radial stress level. However evidence from fractography of specimens showed that in both monotonic and fatigue tests radial cracks (driven by hoop stresses) are initiating prior to circumferential cracks.     

ZrB2-MoSi2 ceramics: A comprehensive overview of microstructure and properties relationships. Part II: Mechanical properties

The mechanical behavior of ZrB₂-MoSi₂ ceramics made of ZrB₂ powder with three different particle sizes and MoSi₂ additions from 5 to 70 vol% was characterized up to 1500 °C. Microhardness (12–17 GPa), Young’s modulus (450–540 GPa) and shear modulus (190–240 GPa) decreased with both increasing MoSi₂ content and with decreasing ZrB₂ grain size. Room temperature fracture toughness was unaffected by grain size or silicide content, whilst at 1500 °C in air it increased with MoSi₂ and ZrB₂ grain size, from 4.1 to 8.7 MPa m^½. Room temperature strength did not trend with MoSi₂ content, but increased with decreasing ZrB₂ grain size from 440 to 590 MPa for the largest starting particle size to 700–800 MPa for the finest due to the decreasing size of surface grain pullout. At 1500 °C, flexure strength for ZrB₂ with MoSi₂ contents above 25 vol% were roughly constant, 400–450 MPa, whilst for lower content strength was controlled by oxidation damages. Strength for compositions made using fine and medium ZrB₂ powders increased with increasing MoSi₂ content, 250–450 MPa. Ceramics made with coarse ZrB₂ displayed the highest strengths, which decreased with increasing MoSi₂ content from 600 to 450 MPa.     

Chemical exposures from upholstered furniture with various flame retardant technologies

Upholstered furniture is often manufactured with polyurethane foam (PUF) containing flame retardants (FRs) to prevent the risk of a fire and/or to meet flammability regulations, however, exposure to certain FRs and other chemicals have been linked to adverse health effects. This study developed a new methodology for evaluating volatile organic compound (VOC) and FR exposures to users of upholstered furniture by simulating use of a chair in a controlled exposure chamber and assessing the health significance of measured chemical exposure. Chairs with different fire-resistant technologies were evaluated for VOC and FR exposures via inhalation, ingestion, and dermal contact exposure routes. Data show that VOC exposure levels are lower than threshold levels defined by the US and global indoor air criteria. Brominated FRs were not detected from the studied chairs. The organophosphate FRs added to PUF were released into the surrounding air (0.4 ng/m³) and as dust (16 ng/m²). Exposure modeling showed that adults are exposed to FRs released from upholstered furniture mostly by dermal contact and children are exposed via dermal and ingestion exposure. Children are most susceptible to FR exposure/dose (2 times higher average daily dose than adults) due to their frequent hand to mouth contact.     

The rural–urban equity nexus of Metro Manila’s water system

ABSTRACT

This article examines equity concerns and inherent conflicts related to rural–urban water supply allocation and use, with focus on Metro Manila. Going beyond the much-discussed difficulty farmers experience from an allocation policy prioritizing urban water requirements, it shows that inequity in raw water allocation is linked to, and further exacerbated by, inequities in urban domestic water provision. Moreover, it highlights the need for broader equity reviews, using the concept of the rural–urban water equity nexus to draw attention to key equity considerations across space and scale that otherwise might remain invisible.     

Influence of different viscosity grade cellulose-based polymers on the development of valsartan controlled release tablets

This work is based on formulating and optimizing controlled release (CR) valsartan (160 mg) tablets using different viscosity grades of the cellulosic polymer. The objective was to develop an effective once-daily drug delivery system of this cardiovascular agent. Central composite design was used for designing the formulations. Polymers used were Methocel® K4M, K15M and K100M. Compatibility of excipients with active was studied through FT-IR. Micromeritic properties were determined and formulations exhibiting appropriate flow characteristics were compressed. Swelling behavior and in vitro buoyancy effect were studied and response surface curves were constructed to optimize the formulation. Multi-point dissolution profiles of valsartan CR tablets at pH 1.2, 4.5 and 6.8 were obtained. Model-dependent and model-independent methods were performed including f2, stability test as per ICH guidelines and ANOVA. FT-IR studies revealed the compatibility of valsartan with all excipients. Formulation K4T9 (containing 25% K4M polymer) was selected to be the best optimized trial, based on physical properties and controlled release profile (23% at 4 h, 82% at 16 h and 100% at 24 h). Results of buoyancy and swelling behavior indicated that HPMC-K4M polymer exhibited excellent floating lag time and swelling indexes. In vitro drug release kinetics showed that formulation K4T9 displayed Korsmeyer–Peppas drug release pattern with r value > 0.99. The manufacturing process of K4T9 was also found to be reproducible with a shelf life period of 41 and 36 months at room temperature and accelerated conditions, respectively. Valsartan CR matrix-based formulation was successfully prepared with Methocel K4M retardant.     

Seasonal movements of muskellunge in the St. Clair – Detroit River System: Implications for multi-jurisdictional fisheries management

The St. Clair-Detroit River System contains a world-class Great Lakes muskellunge (Esox masquinongy) fishery that has avoided the declines observed in many Great Lakes muskellunge populations. Muskellunge are an upper trophic level predator, and therefore a naturally low-density species. Limited fishery-independent data exist on which to base management decisions. To remedy this, we initiated an acoustic telemetry study in May of 2016, in collaboration with the Great Lakes Acoustic Telemetry Observation System. Our objective was to describe patterns of movement of muskellunge in this large and open system to better understand their spatial ecology. We acoustically tagged 133 muskellunge in the Detroit River and Lake St. Clair, and movements of 58 fish that passed our data quality control screens were analyzed. We utilized mixed modelling to assess the effects of sex, length, release location, and season on daily movement rates. We found that movement rates only differed among seasons, with highest movement rates occurring in the fall and lowest movement rates in the winter. Muskellunge tagged at different locations exhibited distinct residency patterns, and fish frequently crossed jurisdictional and waterbody boundaries. Ultimately our study highlights the scope and patterns of muskellunge movement in a large, unimpounded system and demonstrates that management of these fish would benefit from consideration of their full distribution covering multiple management jurisdictions.     

A lakewide survey of Asian clam (Corbicula fluminea) distribution at warmwater discharges in Lake Michigan

The Asian clam Corbicula fluminea is among the most prolific aquatic invaders in the world; but in colder mid-latitude areas, like the Laurentian Great Lakes, their population expansion has likely been limited by poor overwinter survival. In these areas, Asian clams are typically found in thermal refugia like warmwater discharges from industrial facilities. We sought to identify the current extent of Asian clam populations in Lake Michigan and waters immediately adjacent to it, specifically at locations most likely to harbor overwintering populations – industrial warmwater discharges. During April–May 2017, we surveyed 17 locations around Lake Michigan. Evidence of Asian clam populations was found at four sites, though live specimens (n?=?3) were only found at the Indiana Harbor Ship Canal in East Chicago, IN. Shells or fragments of shells were found at Green Bay, WI, Waukegan, IL, and Port Sheldon, MI. Our findings indicate that although Asian clams are present in Lake Michigan, they are relatively rare, and remain isolated to a few small pockets of over-wintering habitat.