Textile‐surface interfacial asymmetric polymerization

This research demonstrated that polymerization of aniline on cellulose produces chiroptically active composites. Polymerization of aniline in the presence of cotton fibers consisting of chiral cellulose are performed to prepare a polyaniline (PANI)/cotton composite. The polymerization is conducted at the cotton interface. The resultant PANI/cotton composite shows chiroptical activity elucidated with diffuse reflectance circular dichroism. In this reaction, textile‐surface interfacial asymmetric polymerization is performed with imprinting of chiral structure from the cotton as a natural chiroptically active polymer to the PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41118.     

High Hardness and Ductile Mosaic SiC/SiO2 Composite by Spark Plasma Sintering

SiC powder was coated with SiO₂ layer by chemical vapor deposition, and the SiC(core)/SiO₂(shell) composite powder was consolidated to a SiC/SiO₂ composite with a mosaic microstructure by spark plasma sintering (SPS) at 1923 K for 1.8 ks. The SiC(core)/SiO₂(shell) powder with a 80–100 nm thick SiO₂ layer resulted in a SiC/SiO₂ composite with a relative density of 97% and hardness and fracture toughness of 17.1 GPa and 8.4 MPa m^1/2, respectively.     

Long-term field survey on thermal adaptation in office buildings in Japan

A long-term field survey was conducted with six buildings in order to investigate how the occupants adapt to the indoor climate in office buildings in Japan. More than 5000 questionnaires and corresponding indoor temperatures were collected. Clothing adjustment was observed to be related to outdoor temperature and indoor temperature, as well as dress codes. No considerable differences were found on the thermal perceptions between two groups of buildings, which provided different levels of opportunity for controlling indoor climate. With both groups, the preferred SET* was always close to 26 °C. The comfort temperature was estimated from the results of clothing adjustment and the preferred SET*. The gradient of the comfort temperature to outdoor temperature was found to be between the adaptive model for centralized HVAC and for natural ventilation. It could be caused by that the major part of the occupants in the present study had more opportunity to control their thermal conditions than in the centralized HVAC buildings (i.e. operable windows, controllable HVAC or personal fans).     

Adjunctive Application of Antimicrobial Photodynamic Therapy in Nonsurgical Periodontal Treatment: A Review of Literature

Periodontal disease is caused by dental plaque biofilms, and the removal of these biofilms from the root surface of teeth plays a central part in its treatment. The conventional treatment for periodontal disease fails to remove periodontal infection in a subset of cases, such as those with complicated root morphology. Adjunctive antimicrobial photodynamic therapy (aPDT) has been proposed as an additional treatment for this infectious disease. Many periodontal pathogenic bacteria are susceptible to low-power lasers in the presence of dyes, such as methylene blue, toluidine blue O, malachite green, and indocyanine green. aPDT uses these light-activated photosensitizer that is incorporated selectively by bacteria and absorbs a low-power laser/light with an appropriate wavelength to induce singlet oxygen and free radicals, which are toxic to bacteria. While this technique has been evaluated by many clinical studies, some systematic reviews and meta-analyses have reported controversial results about the benefits of aPDT for periodontal treatment. In the light of these previous reports, the aim of this review is to provide comprehensive information about aPDT and help extend knowledge of advanced laser therapy.     

Chemical‐Free Approach for Z‐Isomerization of Lycopene in Tomato Powder: Hot Air and Superheated Steam Heating above the Melting Point of Lycopene

Z‐isomers of lycopene exhibit higher bioavailability and antioxidant capacity than those of the all‐E‐isomer. Therefore, it is important to develop an efficient and environmentally friendly procedure for Z‐isomerization. The current methods for Z‐isomerization of (all‐E)‐lycopene use toxic chemicals such as organic solvents and catalysts. This study is aimed to develop a chemical‐free method for Z‐isomerization of (all‐E)‐lycopene in tomato powder by hot air and superheated steam heating. The Z‐isomerization reaction is promoted by heating above the melting point of lycopene. When heated with superheated steam, the thermal decomposition of lycopene is suppressed compared to that when heated with hot air. When tomato powder is heated at 240 °C for 5 min by superheated steam, the total Z‐isomer content and remaining lycopene are 69.0% and 90.7%, respectively, while with hot air heating, the total Z‐isomer content and remaining lycopene are 69.9% and 68.0%, respectively. These results indicate that the thermal Z‐isomerization of lycopene occurs in the molten state and heating in a low oxygen atmosphere suppresses the thermal decomposition of lycopene. Practical Applications: Tomato powder rich in lycopene Z‐isomers is an important ingredient for the food and animal feed industries. Since Z‐isomers of lycopene are more soluble in solvents including ethanol which is a low‐toxicity and environmentally friendly solvent, the efficiency of lycopene extraction with ethanol can be improved by using the Z‐isomer‐rich tomato powder as a raw material. The obtained Z‐isomer‐rich extract has a high added value because the Z‐isomers have higher bioavailability and antioxidant capacity than those of the all‐E‐isomer. In addition, since lycopene Z‐isomers exhibit higher accumulation efficiency and better color improvement in hen egg yolks than those of the all‐E‐isomer, Z‐isomer‐rich tomato powder is an effective animal feed.     

A Rapid Determination of Ergosterol in Grains Using Gas Chromatography–Mass Spectrometry Method Without Derivatization

Food Analytical Methods - A simple, rapid and sensitive GC-MS method using on-column injection was developed and validated to determine ergosterol (ERG) levels in maize and wheat. In this method,...     

Sensitivity of charged particle activation analysis for long-lived radioactive nuclide determination

ABSTRACT

Charged Particle Activation Analysis (CPAA) utilizing an 8-MeV proton beam has been studied for determination of 35 long-lived radioactive nuclides. We accumulated the reaction cross section and nuclear decay data by referring to nuclear database supplied by National Nuclear Data Center in Brookhaven National Laboratory. We also calculated the reaction cross sections by using statistical model code ALICE. By using the nuclear data, we have derived determination sensitivity of the radioactive nuclides relative to unit weight and specific radioactivity. The result indicates that several hardly measurable nuclides with long half-lives such as ¹³⁵Cs, ²⁴⁴Pu, ¹²⁹I, ¹²⁶Sn, ⁹³Mo, ¹⁰⁷Pd, ²³⁶U, ²⁴⁸Cm, and ²³⁷Np have high sensitivity. It may be concluded that CPAA can be applied to determination of several long-lived nuclei and will provide a quick and non-destructive analysis method.