Comparison of flexibility options to improve the value of variable power generation

As the share of variable generation in power systems increases, there is increasing value in more flexible use and generation of electricity. The paper compares the economic value of several flexibility options in a large power system with a large amount of reservoir hydro power. Generation planning models are needed to consider the impact of flexibility options on other investments in a power system. However, generation planning models do not include all the relevant operational details. The approach in the paper combines a generation planning model with a unit commitment and dispatch model. The results demonstrate the value of coupling the heat and power sectors and the value of transmission. Low-cost electricity storage does not appear to be as decisive in the Northern European context with wind power as the main variable generation source. The paper also addresses methodological issues related to the inclusion of operational constraints in generation planning.     

Oxidative capacity and hemolytic activity of settled dust from moisture‐damaged schools

Exposure to moisture‐damaged indoor environments is associated with adverse respiratory health effects, but responsible factors remain unidentified. In order to explore possible mechanisms behind these effects, the oxidative capacity and hemolytic activity of settled dust samples (n = 25) collected from moisture‐damaged and non‐damaged schools in Spain, the Netherlands, and Finland were evaluated and matched against the microbial content of the sample. Oxidative capacity was determined with plasmid scission assay and hemolytic activity by assessing the damage to isolated human red blood cells. The microbial content of the samples was measured with quantitative PCR assays for selected microbial groups and by analyzing the cell wall markers ergosterol, muramic acid, endotoxins, and glucans. The moisture observations in the schools were associated with some of the microbial components in the dust, and microbial determinants grouped together increased the oxidative capacity. Oxidative capacity was also affected by particle concentration and country of origin. Two out of 14 studied dust samples from moisture‐damaged schools demonstrated some hemolytic activity. The results indicate that the microbial component connected with moisture damage is associated with increased oxidative stress and that hemolysis should be studied further as one possible mechanism contributing to the adverse health effects of moisture‐damaged buildings.     

Role of Bose enhancement in photoassociation

Abstract

We discuss the role of Bose enhancement of the dipole matrix element in photoassociation, using stimulated Raman adiabatic passage as an example. In a non-degenerate gas the time scale for coherent optical transients tends to infinity in the thermodynamic limit, whereas Bose enhancement keeps this time scale finite in a condensate. Coherent transients are therefore absent in photoassociation of a thermal non-degenerate gas, but are feasible if the gas is a condensate.     

Total hordatine content in different types of beers

Hordatines are phenolic secondary metabolites typical of barley. Hordatines withstand at least moderate processing, and thus they are also found in barley malts and beer. So far, no published data on the hordatine content has been available in beers or different styles of beer. The aim of this study was to produce information on the total hordatine content in beers and statistically compare the hordatine content of different beer types. In the current study, hordatines were analysed in 208 beers by high‐performance liquid chromatography equipped with a diode array detector (HPLC‐DAD). The average total hordatine content of all beer samples was 5.6 ± 3.1 mg L^?1 as p‐coumaric acid equivalents (PCAE), with a minimum values 0 to a maximum value 18.7 mg L^?1 PCAE. The total hordatine content correlated positively to the alcohol content in lagers, ales, stouts and porters, but not in wheat beers. There was no statistically significant difference in hordatine content in different types of beer, excluding the non‐alcoholic group of beers. It is noteworthy that non‐alcoholic beers also contained hordatines. More research would be needed to understand how parameters, such as mashing, should be chosen in order to achieve maximum recovery of hordatines in wort and beer.     

Preparation and characterisation of α-methylstyrene–butadiene latexes for paper coating applications

The purpose of this work is to demonstrate how α-methylstyrene (AMS) can replace styrene in preparing styrene–butadiene (SB) type latexes and to compare the properties of the paper coating of the prepared α-methylstyrene–butadiene emulsion with the commercial styrene–butadiene latex reference sample. A lot of work is nowadays being conducted on different biorefinery concepts replacing fossil oil with biomass based raw materials due to the expected rise of the fossil oil cost. Aromatics can in principle be produced from renewable raw materials, such as lignin, sugars and terpenes for example. The potential methods include thermochemical conversions, catalytic fast pyrolysis, metabolic engineering, catalytic aromatisation and dehydrogenation among others. Terpenes, such as α-limonene and pinene, are possible sources of aromatics, and they can indeed be catalytically converted to p-cymene. Industrial hydrodealkylation and disproportionation processes developed by major petrochemical companies can further convert p-cymene to BTX aromatics or simultaneously dehydrogenate the alkyl chain of p-cymene to styrenic monomers such as α-methylstyrene. Based on the measured paper properties for uncalendered and calendered coated samples, AMS proved to be adequate to replace the oil based styrene in commercial reference SB latexes. Even though the emulsion polymerisation for the α-methylstyrene–butadiene latex was not optimised, almost all tested properties were at least equally good as in the commercial reference sample. α-Methylstyrene containing coating colours had slightly higher viscosity than the other coating colours. Coating colours containing α-methylstyrene seems to have an improved water retention compared to the commercial reference styrene–butadiene latex coating colour and the laboratory prepared styrene–butadiene coating colour. The paper coated with the commercial reference latex containing coating colour was less porous than the other coated papers. Despite of that, both dry and wet surface strength were at least equally good as in the case of the commercial reference latex. The results are promising when thinking of the future development of the bio-based latexes.     

On-chip offset generator for accurate integral non-linearity testing of A/D converters and D/A-A/D converter pairs

It has recently shown how a constant dc offset between two low-quality test signals can be used to test the integral nonlinearity (INL) of A/D converters (ADCs) without an accurate test stimulus, and how the same method can be used to test the INL of D/A converters (DACs) as well. We propose here an on-chip offset generator for producing the constant offset and analyse its limitations. Experimental tests on the 122 × 22 μm² offset generator fabricated in 130 nm CMOS process show that it can be used to test the INL of 12-b DACs and ADCs. The generator is rail-to-rail capable so that almost the whole input/output range of converters can be tested. Moreover, if the proposed offset generator is used in a ratiometric test setup as proposed here as well, the influence of a reference voltage drift on measurement accuracy is cancelled out. Because of its small size, simple design, rail-to-rail capability and immunity to reference voltage changes, the proposed offset generator is well suited for built-in self-test usage.     

Measurement of Particulate Carbon in Atmospheric Aerosol in Helsinki

By means of a simple optical apparatus the levels and variations of concentrations of elemental carbon in particles were measured. Additionally, relations between variations of elemental carbon, lead, sulfate, total suspended particle, and nitrate concentrations were studied. Calibration was performed on real samples analyzed by a wet chemical method.     

Performance analysis of power generating sludge combustion plant and comparison against other sludge treatment technologies

Expectations on wastewater sludge treatment and recovery of its energy and material contents are increasing because of the tightening legislation and the obligation to reduce environmental impacts of sludge disposal. The objective of this study was to analyze the performance of a heat and power generating sludge combustion plant from technical and economical viewpoints and to compare the studied concept to optional sludge treatment technologies. The plant performance was modeled for sewage sludge produced by approximately 200,000 inhabitants. Two plant sizes below 1000 kWe range were investigated, the smaller plant using sludge as the only fuel and the larger plant with wood chips as the additional fuel. The plants were compared with heat-only plants of similar size. The payback periods for heat-only plants are typically shorter than with the cogenerating plants because the changes in plant investment affect stronger the economy than do the revenues from selling electricity. The gate fee of sludge treatment has the strongest effect on the payback period. The selection of the plant concept (cogeneration, heat only or pure electricity generation) is, however, affected more by the local demand of heat and electricity than pure economy. The selection of the optimal technology for sludge treatment is a complicated task. The studied concept can be the optimal choice, for example, if there is no cement kiln or co-combustion possibility near the source of sludge, if there is no land enhancement demand for the digested sludge, or if the energy surplus from combustion compared to anaerobic digestion is considered more valuable than nutrient recovery possibility from digestion. If the new technology concept is found competitive, it still has to meet the challenge of acceptability from the business, social and cultural points of view.