Thermal desorption and pyrolysis direct analysis in real time mass spectrometry of Nafion membrane

Perfluorosulfonic acid ionomer membranes have been widely used as proton conducting membranes in various electrochemical processes such as polymer electrolyte fuel cells and water electrolysis. While their thermal stability has been studied by thermogravimetry and analysis of low molecular weight products, their decomposition mechanism is little understood. In this study a newly developed methodology of thermal desorption and pyrolysis in combination with direct analysis in real time mass spectrometry is applied for Nafion membrane. An ambient ionization source and a high-resolution time-of-flight mass spectrometer enabled unambiguous assignment of gaseous products. Thermal decomposition is initiated by side chain detachment above 350°C, which leaves carbonyls on the main chain at the locations of the side chains. Perfluoroalkanes are released above 400°C by main chain scission and their further decomposition products dominate above 500 °C. DFT calculation of reaction energies and barrier heights of model compounds support proposed decomposition reactions.     

Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

3D Structural Insights into β-Glucans and Their Binding Proteins

β(1,3)-glucans are a component of fungal and plant cell walls. The β-glucan of pathogens is recognized as a non-self-component in the host defense system. Long β-glucan chains are capable of forming a triple helix structure, and the tertiary structure may profoundly affect the interaction with β-glucan-binding proteins. Although the atomic details of β-glucan binding and signaling of cognate receptors remain mostly unclear, X-ray crystallography and NMR analyses have revealed some aspects of β-glucan structure and interaction. Here, we will review three-dimensional (3D) structural characteristics of β-glucans and the modes of interaction with β-glucan-binding proteins.     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.     

An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

Effect of morphology on shear viscosity for binary blends of polycarbonate and polystyrene

The structure and rheological properties of binary blends of polycarbonate (PC) and polystyrene (PS) were investigated using various PS samples with different molecular weights, namely PS1k (M_w = 1,000), PS53k (M_w = 53,000), and PS240k (M_w = 240,000). The blends with PS53k and PS240k show phase-separated structures, whereas the blend with PS1k is miscible. The shear viscosity decreases greatly on addition of PS53k and PS240k, especially at high shear rates, which would be a great advantage at processing operations. Because the nonlinear response occurs in the small strain region for multilayered films of PC and PS240k, the origin of the significant viscosity drop for the phase-separated system is interfacial slippage at the phase boundary.     

Investigation on standard entropy change of metal hydrides and work function of metals

We focused on the work function of metals as an index of ion binding property between metals and hydrogen and analyzed the relation between the standard entropy change of metal hydrides and the work function of metals (alloys). The standard entropy change of saline hydrides and metallic hydrides roughly increased with the work function. It was indicated that hydrogen storage alloys consist of metal elements A and B whose work functions are small and large, respectively. The standard entropy changes of alloy-based metal hydrides with different composition ratio ΔS⁰ linearly increased with the work functions of the alloys W_c. W_c also linearly increased with the bulk modulus B_c. Then, it was found that ΔS⁰ was proportional to the standard heat of formation ΔH⁰ because dW_c/dB_c, dΔS⁰/dW_c and dΔH⁰/dB_c are constant.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.