Inhaled induction and emergence from desflurane anesthesia in the ambulatory surgical patient: the effect of premedication

We studied the effect of premedication (1 microgram/kg fentanyl and 0.04 mg/kg midazolam 5 min before induction of anesthesia) on airway reactivity and hemodynamic stability during inhaled induction using desflurane in 10 ambulatory surgical patients. Eight patients who were anesthetized without premedication served as the controls. Induction and emergence were rapid and unaffected by premedication. End-tidal and inspired concentrations of desflurane at loss of consciousness were significantly reduced by premedication (10.1% end-tidal/14.1% inspired, no premedication, vs. 5.3% end-tidal/8.9% inspired, premedication). Airway irritability was markedly attenuated by premedication (100% no premedication versus 30% premedicated), as was apnea (37.5% no premedication versus 0% premedicated). We observed an increase in mean arterial blood pressure and heart rate after loss of consciousness (mean arterial pressure 103 vs 121 mm Hg, heart rate 73 vs 100 bpm) in the unpremedicated patients, whereas both groups demonstrated a decrease in mean arterial blood pressure with no change in heart rate when baseline values were compared to those at incision (103 vs 74 mm Hg, no premedication, 99 vs 81 mm Hg premedicated). Patient acceptability was satisfactory and unchanged by premedication. We recommend the use of such premedication when desflurane is used during the induction of anesthesia.     

Piezoelectric glass-ceramics: Crystal chemistry,orientation mechanisms,and emerging applications

Piezoelectric materials have coupled mechanical and electrical energies and have long been used in devices for actuators, sensors, energy harvesters, frequency filters, and various additional applications. Piezoelectricity requires a non-centrosymmetric crystal structure and is therefore confined to materials that possess a periodic crystalline structure. Due to the non-crystalline nature of glass, piezoelectricity is fundamentally forbidden. However, one way to exploit piezoelectric properties in a glassy matrix is by developing glass-ceramics that possess controlled growth of a crystalline phase. Growth and orientation of piezoelectric crystals in a glassy matrix is a non-trivial process that has long been explored to combine the formability of glass with the thermal and mechanical resilience of glass-ceramics. While extensive work has been done in the field of functional glass-ceramics, the results are presented in isolated articles and a comprehensive review pertaining to symmetry breaking methods to exploit anisotropic properties in glass-ceramics has been absent from the literature. Here, we present a global review of the fundamental symmetry requirements for piezoelectricity, the development of polar, piezoelectric glass-ceramic compositions (specifically those with LiNbO₃ and fresnoite-based crystal phases), and various crystal growth and orientation mechanisms, including relevant kinetic and thermodynamic driving forces. Lastly, we discuss the challenges associated with implementing gradients to drive oriented crystal growth to develop non-centrosymmetry, and the need for future modeling work to produce adequate time-temperature-transformation (TTT) diagrams that take into account kinetic and thermodynamic driving forces for oriented crystal growth. Going beyond technical challenges, we conclude with an examination of current and potential applications for piezoelectric glass-ceramics that combine the formability of glass with the symmetry-dependent properties of ceramics.     

Map‐based Visualizations Increase Recall Accuracy of Data

We investigate the memorability of data represented in two different visualization designs. In contrast to recent studies that examine which types of visual information make visualizations memorable, we examine the effect of different visualizations on time and accuracy of recall of the displayed data, minutes and days after interaction with the visualizations. In particular, we describe the results of an evaluation comparing the memorability of two different visualizations of the same relational data: node‐link diagrams and map‐based visualization. We find significant differences in the accuracy of the tasks performed, and these differences persist days after the original exposure to the visualizations. Specifically, participants in the study recalled the data better when exposed to map‐based visualizations as opposed to node‐link diagrams. We discuss the scope of the study and its limitations, possible implications, and future directions.     

利用虚拟化软件环境增强控制性能

CNC系统同时运行一个实时操作系统和MS Windows XP系统可获得多任务能力和实时性能．     

Fast kriging of large data sets with Gaussian Markov random fields

Spatial data sets are analysed in many scientific disciplines. Kriging, i.e. minimum mean squared error linear prediction, is probably the most widely used method of spatial prediction. Computation time and memory requirement can be an obstacle for kriging for data sets with many observations. Calculations are accelerated and memory requirements decreased by using a Gaussian Markov random field on a lattice as an approximation of a Gaussian field. The algorithms are well suited also for nonlattice data when exploiting a bilinear interpolation at nonlattice locations.     

Investigating haptic distance-to-break using linear and nonlinear materials in a simulated minimally invasive surgery task

Accurate detection of mediated haptic information in minimally invasive surgery (MIS) is critical for applying appropriate force magnitudes onto soft tissue with the aim of minimising tissue trauma. Force perception in MIS is a dynamic process, with surgeons’ administration of force into tissue revealing information about the remote surgical site which further informs the surgeons’ haptic interactions. The relationship between applied force and material deformation rate provides biomechanical information specifying the deformation distance remaining until a tissue will fail: which is termed distance-to-break (DTB). The current study demonstrates that observers can detect DTB while deforming simulated tissues and stop before reaching the tissues’ failure points. The design of training simulators, control devices and automated robotic systems for applications outside of MIS is discussed.

Practitioner Summary: In MIS, haptic information is critical for applying appropriate forces onto soft tissue to minimise tissue trauma. Observers used force information to detect how far they could deform a virtual tissue before it would break. The design of training simulators, control devices and automated robotic systems is discussed.     

Relative Loss Bounds for On-Line Density Estimation with the Exponential Family of Distributions

We consider on-line density estimation with a parameterized density from the exponential family. The on-line algorithm receives one example at a time and maintains a parameter that is essentially an average of the past examples. After receiving an example the algorithm incurs a loss, which is the negative log-likelihood of the example with respect to the current parameter of the algorithm. An off-line algorithm can choose the best parameter based on all the examples. We prove bounds on the additional total loss of the on-line algorithm over the total loss of the best off-line parameter. These relative loss bounds hold for an arbitrary sequence of examples. The goal is to design algorithms with the best possible relative loss bounds. We use a Bregman divergence to derive and analyze each algorithm. These divergences are relative entropies between two exponential distributions. We also use our methods to prove relative loss bounds for linear regression.     

Effect of Safety and Environmental Variables on Task Durations in Steel Erection

In spite of the efforts by government agencies, labor organizations, and researchers in the field of health and safety, injuries and fatalities continue to affect the construction industry. In 2002 the construction industry had the undesirable distinction of having two of the most dangerous occupations in the United States, with fatalities among structural steel workers at 58.2 per 100,000 workers (fourth highest rate) and among construction laborers at 27.7 per 100,000 workers (ninth highest rate). Costs associated with construction accidents, such as increased insurance premiums and medical expenses, and loss of productivity are also concerns in the industry. It has not been demonstrated how unsafe working conditions affect worker performance, and the impact of unsafe work practices on worker performance has not been quantified. This paper describes a methodology that included direct observation of steel erection activities and statistical analysis of task duration data. The data collected at steel erection sites included safety conditions such as the use of personal protective equipment (PPE), elevation of the work area, environmental conditions such as temperature and humidity, and worker performance in the form of task durations. Analysis of variance (ANOVA) analysis of 186 of steel erection task durations collected over a six-month period showed that the use of personal protective equipment (PPE), the time of day during which the operation was being performed, the elevation at which the work was being performed, and the presence of decking below the work area had statistically significant effects on the durations of steel erection tasks.     

Evaluation of Agronomic and Seed Characteristics in Elevated Oleic Acid Soybean Lines in the South-Eastern US

Increasing oleic acid, a monounsaturated fatty acid, is reported to strike the best balance between cold flow properties and oxidative stability in soybean seed oil to enhance biodiesel and produce a better burning fuel. In addition, it is important that elevated oleic acid soybeans have the agronomic traits of local cultivars and maintain oleic acid stability across environments. Research was conducted in 2007–2008 to evaluate six Roundup Ready^® soybean recombinant inbred lines exhibiting enhanced levels of oleic acid. The six elevated oleic lines averaged a 55% increase in oleic acid and a 43% decrease in linolenic acid over the two commercial cultivars (AG3906 and AG4103). Some elevated oleic acid genotypes fulfilled the linear regression definition of a stable genotype. TN03-93RR was the best genotype because of its oleic acid content (397 g kg^?1) and desirable regression estimates for stability. Iodine value (IV), peroxide value (PV), and induction period (IP) were used to evaluate the fuel properties of the two lines with the highest oleic acid content and the two commercial cultivars. The elevated oleic acid lines had significantly better IP, PV and IV for better biodiesel properties and oxidative stability than the two commercial cultivars.