Fracture toughness of short carbon fibre reinforced thermoplastic polyimide

The fracture toughness testing of short fibre reinforced thermoplastic materials were performed. Materials tested were the polyimide resin and also that reinforced with 20 wt% or 30 wt% short carbon fibre. For introducing the initial crack, the tapping method, the sliding method and the bridge indentation method were examined. Among them, the sliding method was found to be effective for every case. The fracture tests were conducted by the three-point bending test with several loading rates. Stable crack growth was observed for the neat material while unstable fracture occurred for the reinforced materials. The critical values of the stress intensity factor at crack initiation were greater for the reinforced materials than for the neat resin. The fracture toughness of the 30 wt% reinforced material was independent of loading rate while that of 20 wt% reinforced material increased with loading rate. In order to investigate the fracture mechanisms, fractographic observations were also performed.     

Novel anion exchange membranes having fluorocarbon backbone: Preparation and stability

Anion exchange membranes with excellent durability were prepared by chemical modification of Nafion. The modification was achieved by transformation of the sulfonic acid group into quaternary ammonium group. Namely, Nafion membrane was first converted into an amide-type membrane. Reduction of the carbonxyl group to methylene followed by quaternarization with alkyl iodide resulted in the formation of an anion exchange membrane. The electric resistance of the resulting membranes depends on the equivalent weight of the starting membranes (4.4–6.0 Ω cm² in 0.5N NaCl). The characteristics of the membranes are the excellent stability toward chemical substances such as organic solvents, oxidizing agents, acids, etc. For example, the membranes are stable in aqueous saturated chlorine solution at 60°C for 1000 hr.     

66/77-kV C-GIS using composite insulation in SF6 gas

A second-generation model of cubicletype gas-insulated switchgear (C-GIS) with composite insulation incorporating SF₆ gas has been developed. The design does not require a gas process in field assembly; it has high reliability and its installation is more rapid; and a further reduction in size is achieved. The design principles are described in detail.     

Balanced corpus of contemporary written Japanese

The balanced corpus of contemporary written Japanese (BCCWJ) is Japan’s first 100 million words balanced corpus. It consists of three subcorpora (publication subcorpus, library subcorpus, and special-purpose subcorpus) and covers a wide range of text registers including books in general, magazines, newspapers, governmental white papers, best-selling books, an internet bulletin-board, a blog, school textbooks, minutes of the national diet, publicity newsletters of local governments, laws, and poetry verses. A random sampling technique is utilized whenever possible in order to maximize the representativeness of the corpus. The corpus is annotated in terms of dual POS analysis, document structure, and bibliographical information. The BCCWJ is currently accessible in three different ways including Chunagon a web-based interface to the dual POS analysis data. Lastly, results of some pilot evaluation of the corpus with respect to the textual diversity are reported. The analyses include POS distribution, word-class distribution, entropy of orthography, sentence length, and variation of the adjective predicate. High textual diversity is observed in all these analyses.     

Living cationic polymerization of vinyl monomers by organoaluminum halides

Summary Well-defined living polymers of isobutyl vinyl ether were obtained in the polymerization initiated with ethylaluminum dichloride (EtAlCl₂) in conjunction with a stoichiometric excess of dioxane (5–10 vol%) in n-hexane at 0°C. Under these conditions, the number-average molecular weight of the polymers increased in direct proportion to monomer conversion, while the molecular weight distribution stayed narrow (M_w/M_n = 1.1–1.25). In sharp contrast, the EtAlCl₂-initiated polymerization in the absence of dioxane led to non-living polymers with a broad molecular weight distribution. It was concluded that the propagating carbocation is stabilized not by the counteranion but by an externally added basic compound (dioxane) that strongly interacts with the active end.     

Stability of fine water droplet clouds

The rate of evaporation of monodisperse water droplets was first evaluated by solving numerically the modified Maxwell equation, assuming the cellular model for a droplet clouds. The results are discussed in comparison with those for a single isolated droplet, which can be obtained analytically. The critical conditions for the droplet cloud to be stable are then evaluated as a function of droplet number concentration, droplet size and initial conditions of the surrounding air. Secondly, the equilibrated system, where a water droplet cloud is steadily mixed with unsaturated air, was analysed on the basis of enthalpy and material balance of the system to evaluate the total volume change of the droplets. Some of these analyses were verified by experiment, using an ultramicroscopic technique which is useful for droplet size analysis.     

Heterogeneous nucleation of organic vapours on a cold substrate

The heterogeneous phase transition of the organic vapours, cyclohexane and p-xylene, on a cold substrate was observed by cooling the substrate at a slow rate under reduced pressure conditions. Either organic vapour at a vapour pressure lower than 130 Pa formed directly solid crystals but p-xylene vapour at a higher vapour pressure formed liquid condensates with subsequent formation of solid crystals. The dependence of the critical supersaturation ratios on the critical temperatures and the physical properties of the organic vapours has been clarified by the equation derived on the basis of classical nucleation theory.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Fabrication of piezoelectric multilayer thin-film actuators

In this study, we fabricated multilayer ceramics (MLCs) composed of multilayered Pb(Zr,Ti)O₃ (PZT) piezoelectric thin films with internal electrodes and evaluated their dielectric and piezoelectric properties. The stack of PZT ferroelectric layers (550 nm) and SrRuO₃ (SRO, 80 nm) electrodes were alternatively deposited on Pt/Ti-coated silicon-on-insulator substrates by radio-frequency magnetron sputtering. The MLCs composed of one, three, and five PZT layers were fabricated by the alternate sputtering deposition of PZT ferroelectric layers and SRO electrodes through the movable shadow mask. The capacitances of MLCs were proportionally increased with the number of PZT layers, while their relative dielectric constants were almost same among the each MLC. The MLCs exhibited symmetric and saturated P–E hysteresis loops similar to the conventional PZT thin films. We estimated that the piezoelectric properties of MLCs by FEM simulation, and confirmed that the effective transverse piezoelectric coefficients (d _31,eff ) increased with the number of PZT layers. The piezoelectric coefficients calculated to be d _31,eff  = ?2964 pC/N at 25 PZT layers, which is much higher than those of conventional single-layer piezoelectric thin films.     

Formation and magnetic properties of γ-Fe2O3particles surface modified with crystallized cobalt-ferrite

Acicular γ-Fe2O3particles were heated at 90°C in alkali solution containing Co²⁺and Fe²⁺with Co²⁺/Fe²⁺ratio of 0.5. The coercivity of resultant particles increased linearly with increasing the Co²⁺content, and the coercivity of 900 Oe was obtained for the particles with Co²⁺content of 7 wt%. The shape of the particles is acicular, and an appreciable variation of morphology by the treatment in alkali solution was not observed. Cobalt-ferrite was expected to crystallize epitaxially on the surface of γ-Fe2O3particles, and the increase of coercivity was attributed to the magnetic anisotropy of the cobalt-ferrite. A variation of coercivity by annealing at 60°C and print-through were small compared with those of the particles in which iron were homogeneously substituted by cobalt ions. Such stability was explained by considering that a very high concentration of cobalt ions exist only on the surface of γ-Fe2O3particles, and the migration of cobalt ions is extremely difficult.