Transient liquid phase sintering of high-purity mullite for high-temperature structural ceramics

High-purity mullite ceramics, promising engineering ceramics for high-temperature applications, were fabricated using transient liquid phase sintering to improve their high-temperature mechanical properties. Small amounts of ultrafine alumina or silica powders were uniformly mixed with the mullite precursor depending on the silica-alumina ratio of the resulting ceramics to allow for the formation of a transient liquid phase during sintering, thus, enhancing densification at the early stage of sintering and mullite formation by the reaction between additional alumina and the residual glassy phase (mullitization) at the final stage of sintering. The addition of alumina powder to the silica-rich mullite precursor resulted in a reaction between the glassy silica and alumina phases during sintering, thereby forming a mullite phase without inhibiting densification. The addition of fine silica powder to the mullite single-phase precursor led to densification with an abnormal grain growth of mullite, whereas some of the added silica remained as a glassy phase after sintering. The resulting mullite ceramics prepared using different powder compositions showed different sintering behaviors, depending on the amount of alumina added. Upon selecting an optimum process and the amount of alumina to be added, the pure mullite ceramics obtained via transient liquid phase sintering exhibited high density (approximately 99%) and excellent high-temperature flexural strength (approximately 320 MPa) at 1500 °C in air. These results clearly demonstrate that pure mullite ceramics fabricated via transient liquid phase sintering with compositions close to those of stoichiometric mullite could be a promising process for the fabrication of high-temperature structural ceramics used in an ambient atmosphere. The transient liquid phase sintering process proposed in this study could be a powerful processing tool that allows for the preparation of superior high-temperature structural ceramics used in the ambient processing atmosphere.     

RF sources for ITER Ion Cyclotron H&CD system

The Ion Cyclotron Heating and Current Drive (IC H&CD) system for ITER will provide 20 MW to the plasma. The associated Radio Frequency (RF) source system has to be compliant with all operation modes foreseen in that frame. Their specifications are fully described in this paper and constraints on IC RF source components are detailed, in particular concerning the final stage tube of the amplifier. Results of tests performed under a collaborative work at the National Institute for Fusion Science (NIFS) facility are presented. Consequences on the procurement process by ITER India (II) are deduced.     

ABSORPTION OF CO2 INTO AQUEOUS SOLUTIONS OF STERICALLY HINDERED METHYL AMINOETHANOL USING A HYDROPHOBIC MICROPOROUS HOLLOW FIBER CONTAINED CONTACTOR

The absorption of dilute CO₂ into aqueous solutions of sterically hindered 2-methyl aminoethanol (MAE) and the desorption of CO₂ from CO₂-loaded MAE solutions into N₂ stream were investigated separately for the various combinations of operational variables, using a hydrophobic microporous hollow fiber (polytetrafluoroethylene, PTFE) contained gas-liquid contactor with aqueous solutions of MAE as liquid media in the shell side at 30°C. The absorption of CO₂ in this contactor is governed by resistance in the liquid and hollow fiber phases. The resistance to diffusion in the hollow fiber phase amounts to 76-80% of the total resistance. Nevertheless, the absorption rates of CO₂ into aqueous MAE solutions in this contactor are higher than those into aqueous solutions of sterically hindered 2-amino-2-methyl-1-propanol (AMP) in the stirred tank with a plane unbroken gas-liquid interface. The process of desorption of CO₂ from CO₂-loaded MAE solutions can be regarded as being controlled by diffusion and chemical reaction in both the stagnant film of the liquid phase and the liquid-filled pore of the hollow fiber phase under the slow or intermediate reaction regime. Both absorption and desorption rates under the simultaneous absorption-desorption operation in a single unit tend to approach the respective constant values as process time elapses. The total absorption rate here seems to be almost balanced with the total desorpion rate at the constant mass transfer rate periods.     

Near-net-shape forming of Al-Al3Ni functionally graded material over eutectic melting temperature

A possibility to make near-net-shape functionally graded material (FGM) products has been examined. The FGM billets having a graded volume fraction of Al₃Ni in thickness direction were machined from an Al-Al₃Ni FGM thick-walled tube manufactured by a vacuum centrifugal method. Billets, which were set in the container for the backward extruding, were heated to 650 °C to 680 °C, at which temperature the FGM becomes a mixture of molten aluminum eutectic and solid intermetallics. Then, billets were extruded successfully to FGM cups by a semisolid forming, except at 650 °C. Residual bulky Al₃Ni particles are found at higher temperature. Thus, an optimum operation temperature is found to be around 660 °C, because bulky Al₃Ni particles transform to fine spheroidal or fibrous shape after the forming. The volume fraction of intermetallics at the bottom region of the cup was condensed more than 60 vol pct in a proper billet setting.     

Antioxidant activity and constituents of propolis collected in various areas of China

Propolis is a resinous substance collected by honeybees from various plant sources. The composition of propolis depends on time, vegetation, and the area of collection. This study examined the antioxidant activity of propolis from various areas of China: Heilongjiang, Neimongol, Hebei, Shandong, Shanxi, Gansu, Henan, Hubei, Sichuan, Hunan, Yunnan and Hainan. Ethanol extracts of propolis (EEP) were prepared and evaluated for their antioxidant activities by β-carotene bleaching, 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical-scavenging, and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation decolorization assays. Furthermore, the major constituents in EEP were identified by high-performance liquid chromatography (HPLC) analysis with a photodiode array (PDA) and mass spectrometric (MS) detection, and each component was quantitatively analyzed. All propolis samples except that from Yunnan had relatively strong antioxidant activity accompanied by high total polyphenol contents. Propolis with strong antioxidant activity contained large amounts of antioxidative compounds, such as caffeic acid, ferulic acid and caffeic acid phenethyl ester. On the other hand, propolis from Yunnan and Hainan had compounds not present in propolis from other areas.     

Formation of needle‐like lepidocrocite fine particles by oxidation of an aqueous suspension of ferrous hydroxide in a bubble column

Fine particles of needle‐like lepidocrocite (γ‐FeOOH) were synthesized by the oxidation of aqueous suspensions of ferrous hydroxide using a bubble column with draft tube at a constant temperature ranging from 20°C to 30°C. The oxidation steps leading to green rust (an intermediate) and lepidocrocite (final product), termed Step I and II, respectively, could be described apparently as first order, with respect to oxygen, and zero order, with respect to total ferrous species. When the concentration of oxygen in the feed stream was varied under a constant gas velocity, the mean size based on the major axis of needle‐like particle decreased from 0.60 to 0.35 μm with increasing oxidation rate. When the gas velocity was varied under a constant oxygen concentration, the particle size was almost independent of the oxidation rate and was equal to ca. 0.6 μm. By the addition of a small amount of sodium dihydrogenphosphate (NaH₂PO₄), the major axis could be reduced to 0.2 μm with the minor axis and the oxidation rate almost unchanged.     

Liquid-phase photocatalytic degradation over tio2 particles suspending in gas-liquid dispersion

The photocatalytic degradation over TiO2 particles suspending in the gas-liquid dispersion was modeled by taking the decay of the illumination intensity in the gas-liquid-solid fluidized bed in terms of Lambert-Beer law into consideration. For the sake of experimental verification of the proposed model, the oxidative degradation of an acid dye (C.I. Acid Blue 40) as a model compound, was carried out using a coaxial double cylinder-type reactor (internal cylinder part: quartz glass cylinder installing black light type fluorescent tube as UV light source; annular part: gas-liquid-solid fluidized bed) newly manufactured here. The reactor is operated continuously with respect to the gas phase and batchwise with respect to the solid phase, whereas the liquid phase is recirculated. The degradation rate could be expressed apparently as first-order in the concentration of acid dye. The observed relationship between apparent degradation rate constant and solid (TiO2) loading could satisfactorily be interpreted in terms of the proposed model.     

Stellate ganglion block does not change the tympanic membrane temperatures of either block or unblock sides in male volunteers

STUDY OBJECTIVES: To test the effect of stellate ganglion block on tympanic membrane temperatures. DESIGN: Prospective, observational study. SETTING: Department of Anesthesia, Yamanashi Medical University, Yamanashi, Japan. SUBJECTS: 7 healthy male volunteers. INTERVENTIONS: Stellate ganglion block, 6 ml of 1% mepivacaine hydrochloride, was administered. MEASUREMENTS AND MAIN RESULTS: Application of temperature probes (right and left tympanic membranes, eight adhesive right skin-surface temperatures at the chest, upper arm, digital fingertip, lateral calf, thigh, and great toe) was followed by a 30-minute control period. Temperatures were recorded every 15 minutes for 30 minutes before stellate ganglion block and every 5 minutes for 40 minutes after the block. The right tympanic membrane temperature increased slightly but not significantly compared with the left tympanic membrane temperature 10 minutes after stellate ganglion block and subsequently. Right skin-surface temperature gradients at the upper limb decreased slightly but not significantly after stellate ganglion block. Similarly, right skin-surface temperature gradients at the lower limb decreased slightly but not significantly after stellate ganglion block. CONCLUSIONS: Stellate ganglion block does not change the tympanic membrane temperatures of either block or unblock sides.     

An advanced defect-monitoring test structure for electrical screening and defect localization

A new test structure for the detection and localization of short and open defects in large-scale integrated intralayer wiring processes is proposed. In the structure, an open-monitoring element in the first metal layer meanders around lines of short-monitoring elements placed in contact with N-type diffusion regions to make the structure compact. The proposed structure allows defective test structures to be screened through electrical measurements and killer defects to be localized through voltage contrast or optical microscopy methods.     

A nation-wide surveillance of pathogen in elderly patients with urinary tract infections. 2nd Report: Sensitivities of pathogen for oral antibacterial agents

A nation-wide surveillance of sensitivities of bacteria, which were isolated from elderly patients with UTIs aged more than 65 in 190 private clinics and 73 hospitals, for oral antibacterials, CPFX, OFLX, NFLX, CPDX and CCL, was conducted in August and September in 1993. Antibacterial activities of 5 agents against all 1,511 strains were intensified in CPFX, OFLX, NFLX, CPDX and CCL in that order. Major pathogens such as Enterobacteriaceae, E. faecalis, Staphylococcus spp. and P. aeruginosa were more susceptible to fluoroquinolones than cephems. The rate of resistant strains to antibacterials was higher in isolates from older patients, patients with complicated UTIs and with indwelling catheter. The representative of resistant strains was P. aeruginosa, and about 50% of the strains of P. aeruginosa were resistant to even CPFX which had the most superior antibacterial activity among the 5 agents. About 40% of the S. aureus were MRSA, which were almost resistant to the 5 agents. From the above findings, it was confirmed that a high recovery rate of strains which is less susceptible to various antibacterials is one of the refractory factors in elderly patients with UTIs, particularly in complicated UTIs and with indwelling catheter. Regardless of the size of the clinic or hospital, Fluoroquinolones are more suitable for the treatment of elderly patients with UTIs than cephems.