The corrosion of mild and stainless steel in alkaline anaerobic conditions representing the Belgian “supercontainer” concept and the Swiss L/ILW repository

Deep geological repositories for radioactive waste contain metallic materials, either used to construct disposal canisters or as low-/intermediate-level waste (L/ILW). The safety relevance of corrosion is linked to canister lifetime in the former case and gas generation in the latter. More specifically, the Belgian “supercontainer” concept envisages mild steel for the used fuel disposal canister, and in the case of the Swiss L/ILW repository, mild steels are the largest metallic waste component due to the decommissioning of civilian power-generating facilities. For these circumstances, the corrosion environment is dominated by the chemistry of cement, which is used as buffer or backfill material. The corrosion behaviour of mild steel in anoxic environments was studied through the analysis of the hydrogen end-product. Hydrogen analysis was conducted by periodically purging the cell head-space and analysing the gas using a solid-state hydrogen sensor. While this method is limited to providing only uniform corrosion rates averaged over periods of time, ranging from weeks to months, it provides excellent resolution and sensitivity. The test cell environments were matched against the anticipated Belgian high-level waste and Swiss L/ILW repository environments, and also against experiments that have been conducted by other researchers for comparative purposes. Samples were exposed to synthetic cement pore waters, representing fresh and degraded cement. In young cement waters, the formation of initial corrosion products resulted in steel wire corrosion rates of the order of µm/year, which, at 80°C rapidly declined to ∼10 nm/year. In contrast, SA516 grade 70 steel plate corroded much more slowly under similar conditions. In aged cement waters, initial corrosion rates were higher but declined faster towards a longer-term rate of ∼10 nm/year. 316L stainless steel, embedded in cementitious material, corroded at a rate of <1 nm/year at 50°C.     

Assessment of the influence of the compliant aortic root on aortic valve mechanics by means of a geometrical model

In recent years several researchers have suggested that the changes in the geometry and angular dimensions of the aortic root which occur during the cardiac cycle are functional to the optimisation of aortic valve function, both in terms of diminishing leaflet stresses and of fluid-dynamic behaviour. The paper presents an analytical parametric model of the aortic valve which includes the aortic root movement. The indexes used to evaluate the valve behaviour are the circumferential membrane stress and the stress at the free edge of the leaflet, the index of bending strain, the bending of the leaflet at the line attachment in the radial and circumferential directions and the shape of the conduit formed by the leaflets during systole. In order to evaluate the role of geometric changes in valve performance, two control cases were considered, with different reference geometric configuration, where the movement of the aortic root was ignored. The results obtained appear consistent with physiological data, especially with regard to the late diastolic phase and the early ejection phase, and put in evidence the role of the aortic root movement in the improvement of valve behaviour.     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hybrid photocatalytic membranes embedding decatungstate for heterogeneous photooxygenation

The incorporation of decatungstate in polymeric membranes provides new heterogeneous photocatalysts for the oxidation of organic substrates under oxygen atmosphere at 25 °C. Photocatalytic membranes have been prepared yielding polymeric films with a high thermal, chemical and mechanical stability (PVDF, PDMS, Hyflon). Surface spectroscopy techniques including transmittance and reflectance UV-Vis and FT-IR have been used to assess the photocatalyst integrity within the polymeric support. Catalyst screening has been performed under both homogeneous and heterogeneous photooxygenation conditions. The photocatalyst activity has been evaluated in terms of the substrate conversion, turnover numbers, and recycling experiments. A membrane induced selectivity behavior has been evidenced by comparison with homogeneous oxidations.     

Controlled experiments to study corrosion effects due to external varying fields in embedded pipelines

We present controlled laboratory tests carried out to study corrosion effects due to induction currents on pipes embedded in environments with electrical resistance lateral discontinuities. Sacrificial anodes were connected to underground pipes, and corrosion rates were estimated by measuring the mass loss in each anode. We considered 1 Hz and 50 Hz inducting fields, and the effects produced on the pipes were compared with cases without an external field. The results indicated an increase in the corrosion rate when the pipe was under the effect of induction currents, particularly where there was a change of electrical resistance in the soil.     

Spatio-temporal hotspots and application on a disease analysis case via GIS

Hotspot analysis is a spatial analysis that uses cluster techniques for determining areas with elevated concentrations of localized events. We use the consolidated Extended Fuzzy C-Means algorithm to determine the hotspot areas on the map as circles, moreover the advantages of this technique are the linear computational complexity, the robustness to noise and outliers, the automatic determination of the optimal number C of clusters (in the classical FCM algorithm C is chosen a priori). Furthermore it prevents the problem of shifting the clusters with low density area of data points in areas with higher density of such points. We apply this method to study the spatio-temporal variations of the hotspot areas by testing this process on a specific disease problem, precisely we have clusterized 5,000 point-events correspondent to cases of brain cancer detected in the state of New Mexico from 1973 to 1991. We also show that the same results are obtained by using the Extended Gustafson–Kessel algorithm which gives elliptical clusters. We have implemented both algorithms in a Geographic Information System environment. Thus we establish the areas which seem not interested from the incidence of the disease and those areas in which the phenomenon appears to be temporarily attenuated either increased or constant or quite disappeared.     

PRILJ: an efficient two-step method based on embedding and clustering for the identification of regularities in legal case judgments

In an era characterized by fast technological progress that introduces new unpredictable scenarios every day, working in the law field may appear very difficult, if not supported by the right tools. In this respect, some systems based on Artificial Intelligence methods have been proposed in the literature, to support several tasks in the legal sector. Following this line of research, in this paper we propose a novel method, called PRILJ, that identifies paragraph regularities in legal case judgments, to support legal experts during the redaction of legal documents. Methodologically, PRILJ adopts a two-step approach that first groups documents into clusters, according to their semantic content, and then identifies regularities in the paragraphs for each cluster. Embedding-based methods are adopted to properly represent documents and paragraphs into a semantic numerical feature space, and an Approximated Nearest Neighbor Search method is adopted to efficiently retrieve the most similar paragraphs with respect to the paragraphs of a document under preparation. Our extensive experimental evaluation, performed on a real-world dataset provided by EUR-Lex, proves the effectiveness and the efficiency of the proposed method. In particular, its ability of modeling different topics of legal documents, as well as of capturing the semantics of the textual content, appear very beneficial for the considered task, and make PRILJ very robust to the possible presence of noise in the data.