Damage evolution around white etching layer during uniaxial loading

Rolling contact fatigue cracks and thermally induced defects are common problems in the railway industry especially as demands for increasing loads, speeds, and safety continue to rise. Often, the two types of defects are found together in the field, however, whether one causes the other to occur is not completely agreed upon. The effect of thermal damage, in the form of a martensite spot on pearlitic steel test bars, on the fatigue life in uniaxial low cycle fatigue experiments was investigated by the authors. However, the focus of the current work was to characterize the damage evolution from the low cycle fatigue (LCF) tests and correlate the crack initiation and propagation with the initial thermal damage. Residual stress measurements, digital image correlation, and X‐ray tomography were used to characterize the effects of the thermal damage before, during, and after fatigue testing, respectively. It was found that the thermal damage causes strain accumulation and crack initiation at the interface between the two materials. The strain evolution was visualized using digital image correlation (DIC), clearly showing the strain concentrations at the top and bottom of the white etching layers (WEL), where the residual stresses are also most tensile. X‐ray tomography confirmed the planar crack growth from the martensite spot.     

Corrosion of hot-dip-galvanised steel and zinc alloy-coated steel in ammonia and ammonium chloride

There are many potential causes of corrosion in animal buildings. Animals exhale large quantities of moisture into the air creating high relative humidity in the building if the moisture is not properly vented. High humidity increases the potential for condensation. In addition, ammonia may be found in large quantities in animal buildings. Ammonia is released from manure and urine. In addition, ammonium chloride is used as a nitrogen source in fertilisers. In this study, the atmospheric corrosion of hot-dip-galvanised steel and zinc alloy-coated steel such as zinc–aluminium and zinc–aluminium–magnesium has been studied in atmospheres containing different levels of ammonia. Investigations have also been conducted at different levels of ammonium chloride. The results are discussed in view of the mechanisms of corrosion of zinc and zinc alloy-coated steel in ammonia and ammonium chloride-containing environments.     

Mild and severe udder cleft dermatitis—Prevalence and risk factors in Swedish dairy herds

Udder cleft dermatitis (UCD) is an inflammatory skin condition affecting the anterior parts of the udder of dairy cows. The lesions may present as mild or severe skin lesions and have been associated with mastitis and digital dermatitis. The full etiology and pathogenesis are not understood and no large-scale studies have investigated prevalence and risk factors. Therefore, the main objectives of the study were to investigate the prevalence of mild and severe UCD in Swedish dairy herds and to identify risk factors associated with such lesions. We also wanted to investigate risk factors for all cases of UCD and to determine whether UCD increases the risk for mastitis and culling. A random sample of 100 freestall dairy herds were included in the study, and each herd was visited once. Cows were registered as having no, mild, or severe UCD. Additional cow and herd data were obtained via observations, interviews, and the Swedish Official Milk Recording Scheme. The data were analyzed using logistic regression models to identify risk factors for mild and severe UCD. In total, data from 3,479 cows in 99 herds were analyzed. The prevalence of mild and severe UCD was 19 and 9%, respectively. Lesions were found in 98 of 99 herds but the within-herd prevalence of mild (0–43%) and severe (0–33%) UCD varied notably between herds. Breed (Swedish Red compared with Swedish Holstein), certain udder conformation traits, and higher parity were risk factors associated with increased risk of UCD. In addition, cows with hock lesions and cows in herds with high incidence of culling due to hoof and leg diseases had a higher risk for mild UCD. More days in milk and high milk yield were cow-related risk factors associated with severe UCD. Three housing-related factors (shorter cubicles, mattress as cubicle base, and cubicles installed before 2001 compared with 2001–2005), a high incidence of veterinary-treated clinical mastitis and culling due to udder diseases, and a low incidence of culling of first-parity cows in early lactation were herd-related risk factors associated with increased risk for severe UCD. In addition, cows in herds with a high proportion of heifers older than 17 mo that were not inseminated were associated with lower risk of all UCD. Finally, UCD was not associated with the outcomes milk somatic cell count, veterinary-treated clinical mastitis, or culling in the multivariable analyses. The etiology of UCD is most likely multifactorial, involving udder conformation traits and other cow-related risk factors as well as herd-related risk factors. The high prevalence of severe UCD lesions in Swedish dairy cows emphasizes the need for preventive measures and efficient treatments.     

The variation of bedrock quality with increasing ductile deformation

Most of the rocks in Precambrian shield areas have experienced a complex structural and metamorphic evolution, processes which have a strong influence on the bedrock quality. This may vary both on a local and regional scale. The main object of this investigation was to study the variation of the rock mechanical properties at various stages of ductile deformation of an originally isotropic rock. Ten samples from five different localities northeast of Lake Vänern (south central Sweden) were tested, including studded tyre and LA tests, uniaxial compressive strength (UCS), ultrasonic velocity, electrical resistivity, Swedish impact value and Swedish flakiness index as well as petrographic and chemical analyses. This study highlights the importance of considering all possible variations in bedrock before classification, and of undertaking regional investigations.     

Fire Emissions of Organics into the Atmosphere

The mass of dioxins, PAH (polycyclic aromatic hydrocarbons) and VOC (volatile organic compounds) emitted from fires to the atmosphere in Sweden per year has been estimated. The estimate is based on the number of fires in buildings, vehicles, waste and forest fires in Sweden in 1999. It is estimated that the total emission of dioxins from fires is in the range 0.5–1.4 g TEQ. The total emissions of PAH and VOC are in the ranges 2–12 ton and 13–200 ton, respectively. The estimated emission of dioxins from fires approximately corresponds to the total emission from traffic or half the emissions from municipal waste combustion (Swedish data from 1993). The fire statistics show that the mass of material combusted in building fires during a year is approximately 7500 ton, while that from forest fires is 2600 ton. Additionally, 2000–3000 tons are combusted in vehicle fires, fires in containers, etc. In addition to the more common types of fires during a year, individual large incidents may contribute significantly to the total emission. Such incidents include fires in municipal landfills or specific waste storage facilities (such as those for used tyres). An assessment of the consequences of such incidents has been made. This assessment implies that a large contribution to the emission of dioxins could be expected from fires in landfills and from fires in waste plastics (PVC) and tyres. Fires in deposits of wood chips and tyres are also significant potential sources of PAH and VOC.     

Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook

Currently available treatments for the degenerated intervertebral disc present disadvantages, such as surgical invasiveness and inadequate load distribution results. Load-bearing, injectable materials may be interesting for future therapies, but have not been studied in depth. In this study, the existing literature was screened for studies on injectable materials for the intervertebral disc and a rationale for load-bearing, injectable materials was formulated. Requirements for such a material were discussed, partly based on the experience of materials used for similar applications. Important properties were discussed and found to include biocompatibility, bioactivity, porosity, handling, injectability, working time, setting time, radiopacity, containment and mechanical properties, where several of these properties are linked to one another. In conclusion, there is a need for consensus on the properties of new materials developed for use in minimally invasive procedures in the spine. A substantial amount of attention may need to be given to non-toxic setting reactions.     

Noise Effect on Ice Surface Softening During Friction

The ice surface softening by friction is investigated considering the additive non-correlated fluctuations of the shear strain and stress, and the temperature. The premelting is construed by the Kelvin–Voigt equation for shear strain and by the relaxation equations of Landau–Khalatnikov type for shear stress and temperature. Taking into account the noises in these equations, the Langevin and Fokker–Planck equations are derived. Their analysis is based on the investigation of extrema of the distribution function, i.e., steady-state values of the shear strain using the Stratonovich interpretation. The phase diagrams are constructed, where the noises intensities and thermostat temperature determine the regions of ice, softened ice and their mixture (stick–slip rubbing). We present that domain of ice friction is bounded by relatively small background sliding block temperatures and fluctuation intensities of the stress and temperature. The ice film softens with growth of the stress noise intensity even at small thermostat temperatures. The friction force time series for all rubbing modes are calculated and compared with experimentally observed ones.     

Field normalized citation rates, field normalized journal impact and Norwegian weights for allocation of university research funds

We compared three different bibliometric evaluation approaches: two citation-based approaches and one based on manual classification of publishing channels into quality levels. Publication data for two universities was used, and we worked with two levels of analysis: article and department. For the article level, we investigated the predictive power of field normalized citation rates and field normalized journal impact with respect to journal level. The results for the article level show that evaluation of journals based on citation impact correlate rather well with manual classification of journals into quality levels. However, the prediction from field normalized citation rates to journal level was only marginally better than random guessing. At the department level, we studied three different indicators in the context of research fund allocation within universities and the extent to which the three indicators produce different distributions of research funds. It turned out that the three distributions of relative indicator values were very similar, which in turn yields that the corresponding distributions of hypothetical research funds would be very similar.     

Corrosion product formation on Zn55Al coated steel upon exposure in a marine atmosphere

The formation of corrosion products on Zn55Al coated steel has been investigated upon field exposures in a marine environment. The corrosion products consisted mainly of zinc aluminium hydroxy carbonate, Zn_0.71Al_0.29(OH)₂(CO₃)_0.145·xH₂O, zinc chloro sulfate (NaZn₄(SO₄)Cl(OH)₆·6H₂O), zinc hydroxy chloride, Zn₅(OH)₈Cl₂·H₂O and zinc hydroxy carbonate, Zn₅(OH)₆(CO₃)₂ were the first three phases were formed initially while zinc hydroxy carbonate Zn₅(OH)₆(CO₃)₂ was formed after prolonged exposure in more corrosive conditions. The initial corrosion product formation was due to selective corrosion of the zinc rich interdendritic areas of the coating resulting in a mixture of zinc and zinc aluminium corrosion products.