Comparison of Canola and Soy Flour with Added Isocyanate as Wood Adhesives

Canola is widely grown in the northern latitudes for its vegetable oil, generating large quantities of residual, low value canola flour used as animal feed. The common wood adhesive poly(diphenylmethylene diisocyanate) (pMDI) should react with the wide variety of functional groups in proteins. Therefore, it would seem that canola flour with added pMDI could be an effective adhesive. Two main questions are addressed in this study: How do the wood adhesive properties of canola flour compare to the better-studied soy flour? How well do proteins, which contain an abundance of functional groups, cure with the very reactive pMDI? These questions were addressed using the small-scale adhesive strength test ASTM D-7998, with various adhesive formulations and bonding conditions for canola flour plus pMDI compared to soy adhesives. The more challenging wet cohesive bond strength was emphasized because the dry strengths were usually very good. Generally, soy adhesives were better than canola ones, as was the polyamidoamine-epichlorohydrin cross-linker compared to pMDI, but these generalizations can be altered by the conditions selected. Three-ply plywood tests supported the small-scale test results.     

Production of angiotensin-converting enzyme inhibitory peptides in Iranian ultrafiltered white cheese prepared with Lactobacillus brevis KX572382

In this study, ultrafiltered (UF) Iranian white cheese made with adjunct cultures including six Lactobacillus isolates (Lactobacillus brevis, L. casei and L. plantarum) from traditional Iranian Motal cheese. The peptide extract (<5 kDa) of cheese samples were assessed for angiotensin-converting enzyme (ACE)-inhibitory activity during ripening (5 °C). Among the strains used, L. brevis KX572382 (M8) was selected because of the greater increase in (ACE)-inhibitory activity in the cheese (P < 0.05). The highest activity of M8 extract was observed on the 28th (71.72%) day of ripening (P < 0.05). Proteolytic activity assessment and RP-HPLC peptide profile of M8 water-soluble extracts (WSEs) indicated the effect of M8 on further protein degradation due to secondary proteolysis. A total of 7 different peptide sequences, previously known in the literature for their ACE-inhibitory activity, were tentatively identified by LC/ESI-MS in 28-day M8 peptide extract. Although the effect of M8 on pH and the proteolysis development in cheese was significant, no adverse effect was observed on the sensory properties. In conclusion, M8 strain can enhance the functional properties of Iranian UF white cheese.     

Highly crystalline and oriented high‐strength poly(ethylene terephthalate) fibers by using low molecular weight polymer

High‐strength poly(ethylene terephthalate) (PET) fibers were obtained using low molecular weight (LMW) polymervia horizontal isothermal bath (hIB), followed by postdrawing process. We investigated the unique formations of different precursors, which differentiated in its molecular orientation and crystalline structures from traditional high‐speed spinning PET fibers. Sharp increase in crystallinity was observed after drawing process even though the fibers showed almost no any crystallinity before the drawing. Properties of as‐spun and drawn hIB and control filaments at different process conditions were compared. As would be expected, performances of resulted treated undrawn and drawn fibers have dramatically improved with developing unique morphologies. Tenacities more than 8 g/d for as‐spun and 10 g/d for drawn treated fibers after just drawn at 1.279 draw ratio were observed. These performances are considerably higher than that of control fibers. An explanation of structural development of high‐strength fibers using LMW polymer spun with hIB is proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42747.     

Kinetic study of styrene atom transfer radical polymerization from hydroxyl groups of graphene nanoplatelets: Heterogeneities in chains and graft densities

Confinement effect of graphene nanoplatelets on the kinetics of styrene atom transfer radical polymerization was studied by a “grafting from” reaction. Graphene oxide was modified by different amounts of (3‐aminopropyl) triethoxysilane and then alpha‐bromoisobutyryl bromide from the hydroxyl groups. Polymerization of styrene in the presence of modified graphene and free initiator, ethyl alpha‐bromoisobutyrate, was accomplished at 110°C. Then, effect of various graft densities and different graphene loadings on the heterogeneous graft and free polystyrene chains characteristics and also kinetics of polymerization was studied by gas and gel permeation chromatographies. Efficiency of grafting reactions along with the graft contents was studied by X‐ray photoelectron spectroscopy, elemental analysis, and thermogravimetric analysis. Confinement effects of graphene on the relaxation behavior of polystyrene chains and also morphology of the graphenes were studied by differential scanning calorimetry and transmission electron microscopy, respectively. POLYM. ENG. SCI., 55:1720–1732, 2015. © 2014 Society of Plastics Engineers     

Microscopic and macroscopic atomization characteristics of a pressure-swirl atomizer,injecting a viscous fuel oil

Combustion of heavy fuels is one of the main sources of greenhouse gases, particulate emissions, ashes, NOxand SOx. Gasification is an advanced and environmentally friendly process that generates combustible and clean gas products such as hydrogen. Some entrained flow gasifiers operate with Heavy Fuel Oil(HFO) feedstock. In this application, HFO atomization is very important in determining the performance and efficiency of the gasifiers.The atomization characteristics of HFO(Mazut) discharging from a pressure-swirl atomizer(PSA) are studied for different pressures difference(Δp) and temperatures in the atmospheric ambient. The investigated parameters include atomizer mass flow rate( _m), discharge coefficient(CD), spray cone angle(θ), breakup length(Lb), the unstable wavelength of undulations on the liquid sheet(λs), global and local SMD(sauter mean diameter) and size distribution of droplets. The characteristics of Mazut sheet breakup are deduced from the shadowgraph technique. The experiments on Mazut film breakup were compared with the predictions obtained from the liquid film breakup model. Validity of the theory for predicting maximum unstable wavelength was investigated for HFO(as a highly viscous liquid). A modification on the formulation of maximum unstable wavelength was presented for HFO. SMD decreases by getting far from the atomizer. The measurement for SMD and θ were compared with the available correlations. The comparisons of the available correlations with the measurements of SMD andθ show a good agreement for Ballester and Varde correlations, respectively. The results show that the experimental sizing data could be presented by Rosin-Rammler distributions very well at different pressure difference and temperatures.     

Efflorescence control in geopolymer binders based on natural pozzolan

This paper addresses methods to reduce efflorescence in a geopolymer binder based on a pumice-type natural pozzolanic material from Taftan, Iran. Geopolymer pastes samples are analyzed for compressive strength and efflorescence formation after curing at 95% humidity for 28 days. To reduce the extent of efflorescence, Al-rich mineral admixtures such as metakaolin, ground granulated blast-furnace slag, and three types of calcium aluminate cements are incorporated into the dry binder at a range of concentrations. Hydrothermal curing at elevated temperatures also shows a positive effect in efflorescence reduction. Calcium aluminate cements show the greatest effect in efflorescence reduction, which is attributed to their dissolution in alkaline media releasing high amounts of alumina into the aluminosilicate geopolymer gel. These results confirm that it is possible to develop a more reliable geopolymer binder with improved properties either by adding a suitable amount of active alumina to precursors such as natural pozzolan, or by manipulating the curing conditions to enhance alumina release from less-reactive precursor phases.     

Synthesis and characterization of alcogels based on ethylene glycol methyl ether methacrylate-vinyl phosphonic acid copolymers

Alcohol absorbents based on poly(ethylene glycol methyl ether methacrylate) and vinyl phosphonic acid (VPA) were prepared via solution polymerization using poly(ethylene glycol dimethacrylate) macrocrosslinker. Swelling capacity of these materials was measured in water, ethanol and methanol. Alcohol absorbency was increased with increase of VPA content that can be attributed to ability of VPA in formation of H-bonding and disassociation of phosphonic acid group to produce mobile ions. The alcogels could absorb ethanol and methanol up to 15.1 and 17.8 g/g respectively. Thermo-gravimetric analysis showed that increase in VPA concentration increased char yield and decreased the initial decomposition temperature (IDT) due to forming anhydride crosslinks during heating. Based on rheological measurements, the storage modulus was increased with increase in PEGMEMA content. The prepared alcogels were further characterized using FTIR, NMR and DMTA.