Magnetic resonance imaging (MRI) site planning and economics

Site planning and economic forecasting for MRI require careful, individualized analysis of several possible sites. Particular attention should be accorded to the magnetic environment. Realistic estimates of financial feasibility will depend heavily on decisions of regulators and third-party payers.     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

UTILIZATION OF POPULATION BALANCES IN SIMULATION OF LIQUID-LIQUID SYSTEMS IN MIXED TANKS

A simulation model has been developed to model drop populations in a mixed tank. A multiblock mixed tank model has been used with the drop population balance equations developed in the literature. The drop breakage and coalescence functions used in the population balance model take into account the local turbulent energy dissipation values. The drop breakage and coalescence function parameters are fitted against drop size measurements from dense liquid-liquid dispersions, which were assumed fully turbulent. Since the local turbulence and flow values of a mixed tank are used in the present model, the fundamental breakage and coalescence phenomena can be taken into closer examination. Furthermore, the present model is capable of predicting inhomogeneities occurring in a mixed tank. It is also considered as an improved tool for process scale-up, compared to the simple vessel-averaged population balance approach, or use of correlations of dimensionless numbers only. The present model can use two sources of data for fitting parameters in the drop rate functions. One is the transient data of the measured drop size distribution as the impeller speed is changed. The other is the time-averaged data measured at different locations of the mixed tank. Different flow regions can be chosen from direct measurements or from the CFD simulations in a straightforward manner. CFD flow simulation results can be used when no experimentally obtained flow conditions are available. This is especially useful for nonstandard vessels, such as reactors containing cooling coils.     

Acute heavy alcohol intake increases silent myocardial ischaemia in patients with stable angina pectoris

PURPOSE: The purpose was to determine tumor neovascularisation via colour-coded Doppler (duplex) sonography and the "power mode", both visually and quantitatively, by means of videodensitometry. MATERIAL AND METHODS: 6 VX2 tumours of 4 to 11 mm size were implanted in 4 rabbits at various sites. The colour-coded duplex sonography and the new sonographic power technique were tested before and after having injected a new contrast medium (SH U 616A). RESULTS: If no contrast medium was injected, tumour neovascularisation was identified in only 50% of the cases. Injection of contrast medium increased signal intensity three to fourfold with all examined tumors. Combined use of the sonographic method by the power technique with injection of contrast medium is outstandingly suitable for tumor vessel imaging even of small tumors, as these initial results seem to show. CONCLUSION: If these results are corroborated by further studies, contrast-medium supported sonographic technique may possibly become established as an alternative method to other imaging procedures.     

Effect of Anisotropy and Destructuration on the Behavior of Murro Test Embankment

This paper investigates the influence of anisotropy and destructuration on the behavior of a test embankment on soft clay. The test embankment at Murro, Finland, was commissioned in 1993 by the Finnish Road Administration and has been monitored for over 10?years. The construction and consolidation of Murro test embankment is analyzed with finite element method using three different constitutive models to represent the soft soil. The results are compared with field observations. The constitutive models used include two recently proposed constitutive models, namely S-CLAY1 that accounts for initial and plastic strain induced anisotropy and its extension, called S-CLAY1S. The S-CLAY1S model accounts, additionally, for interparticle bonding and degradation of bonds. For comparison, the test embankment is also analyzed using the isotropic Modified Cam Clay model. The simulations demonstrate that for this type of problem, it is important to account for the anisotropy, whereas destructuration appears to have less influence on predicted deformations. However, only a model incorporating destructuration can explain the decrease in undrained shear strength during consolidation that was measured in field.     

Temporal property verification as a program analysis task

We describe a reduction from temporal property verification to a program analysis problem. First we present a proof system that, unlike the standard formulation, is more amenable to reasoning about infinite-state systems: disjunction is treated by partitioning, rather than enumerating, the state space and temporal operators are characterized with special sets of states called frontiers. We then describe a transformation that, with the use of procedures and nondeterminism, enables off-the-shelf program analysis tools to naturally perform the reasoning necessary for proving temporal properties (e.g. backtracking, eventuality checking, tree counterexamples for branching-time properties, abstraction refinement, etc.). Using examples drawn from the PostgreSQL database server, Apache web server, and Windows OS kernel, we demonstrate the practical viability of our work.     

3‐Heterocycle‐Phenyl N‐Alkylcarbamates as FAAH Inhibitors: Design,Synthesis and 3D‐QSAR Studies

Carbamates are a well‐established class of fatty acid amide hydrolase (FAAH) inhibitors. Here we describe the synthesis of meta‐substituted phenolic N‐alkyl/aryl carbamates and their in vitro FAAH inhibitory activities. The most potent compound, 3‐(oxazol‐2yl)phenyl cyclohexylcarbamate ( 2 a ), inhibited FAAH with a sub‐nanomolar IC₅₀ value (IC₅₀=0.74 nM ). Additionally, we developed and validated three‐dimensional quantitative structure–activity relationships (QSAR) models of FAAH inhibition combining the newly disclosed carbamates with our previously published inhibitors to give a total set of 99 compounds. Prior to 3D‐QSAR modeling, the degree of correlation between FAAH inhibition and in silico reactivity was also established. Both 3D‐QSAR methods used, CoMSIA and GRID/GOLPE, produced statistically significant models with coefficient of correlation for external prediction (R²_PRED) values of 0.732 and 0.760, respectively. These models could be of high value in further FAAH inhibitor design.     

Asymptotic behavior of morphological filters

The connection between morphological and stack filters is used in the analysis of the statistical properties of morphological filters. Closed-form expressions for the output distributions of morphological filters are given, and their statistical symmetry properties are analyzed. Asytotically tight bounds on the expectations of two-dimensional morphological filters, and asymptotic formulas for the variances of one-dimensional morphological filters are derived. These results form the basis for analyzing general asymptotic properties of morphological filters.     

Environment Analysis as a Basis for Designing Multimodal and Multidevice User Interfaces

In this article, we present a practical approach to analyzing mobile usage environments. We propose a framework for analyzing the restrictions that characteristics of different environments pose on the user's capabilities. These restrictions along with current user interfaces form the cost of interaction in a certain environment. Our framework aims to illustrate that cost and what causes it. The framework presents a way to map features of the environment to the effects they cause on the resources of the user and in some cases on the mobile device. This information can be used for guiding the design of adaptive and/or multimodal user interfaces or devices optimized for certain usage environments. An example of using the framework is presented along with some major findings and three examples of applying them in user interface design.