Critical current density and mechanical performance of MgB2 superconductors prepared with different magnesium sources

In this study, the critical current density and mechanical performance of MgB₂ superconductors prepared using different magnesium sources (Mg and MgH₂ with 99.9% and 96.5% purities, respectively) were analyzed. When the samples were characterized structurally and electrically, we found that the grain sizes were about 40?nm and transition temperature was around 30?K being lower than the literature. Critical current densities of all samples were calculated using Bean's model and our calculations yielded critical current density values higher than 10⁶?A?cm^?2 in self-field. The highest critical transition temperature value belongs to M800 (Mg with 99.9% purity) sample and when the critical current density and transition temperature values of this sample are considered, this sample appears to have the potential for practical use. Vicker's microhardness measurements were performed and yield stress (Y), elastic modulus (E), brittleness (B_i), ductility (D) and fracture toughness (K_IC) were calculated. All samples exhibited Indentation Size Effect (ISE) and microhardness measurements were compared with some microhardness models with were compatible with ISE behavior.     

An analysis of used lubricant recycling unit in Turkey

In chemical industries such as lube oil recycling units, stakeholders seek to continuously increase the productivity and profitability of the chemical processes to survive in the market. While scholars have investigated technological production options, recycling, and lube oil recycling flows, there is not enough study that evaluates the interplay between the production volume allocation and the recycled oil quality and quantity contingent upon the process temperature and pressure. The results based on a case study in the Kayalar Dorse production in Turkey show that by optimizing the chemical process mix, the volume of the lubricant oil can be increased by 20% at almost zero variable cost increase.     

Comparison of lactic acid bacteria diversity during the fermentation of Tarhana produced at home and on a commercial scale

Food Science and Biotechnology - In this study, lactic acid bacteria diversity during the fermentation of homemade and commercially prepared Tarhana, a traditional fermented cereal food from...     

Synthesis, characterization, electrochemistry and spectroelectrochemistry of novel soluble porphyrazines bearing unsaturated functional groups

Metalloporphyrazines with a 2-methyl-2-pentenyl group fused to each pyrrole unit were synthesized starting with the corresponding unsaturated dicarbonitrile derivative. The new compounds were characterized by elemental analysis together with FTIR, ¹H-NMR, and UV-Vis spectroscopy and via voltammetric and spectrochemical methods. Electrochemical and spectroelectrochemical measurements demonstrate that while metal-free and magnesium porphyrazines gave common porphyrazine (Pz) ring-based electron-transfer reactions, incorporating redox active metal center, Co^II, into the porphyrazine core extended the redox activity of the ring system with reversible metal-based reduction and oxidation couples of the metal center in addition to the common Pz ring-based electron transfer processes. The unsaturated functional groups of the porphyrazines did not alter the common electrochemical behavior of the complexes. An in situ electrocolorimetric method, based on the 1931 CIE (Commission Internationale de l’Eclairage) system of colorimetry, was applied to investigate the color of the electro-generated anionic and cationic forms of the complexes for possible electrochromatic applications.     

Hemocompatibility,cytotoxicity, and genotoxicity of poly(methylmethacrylate)/nanohydroxyapatite nanocomposites synthesized by melt blending method

The aim of this study was to show the hemocompatibility, cytotoxicity, and genotoxicity of nanocomposites that were synthesized with different molecular weights of poly(methyl methacrylate) (PMMA) and different concentrations of nanohydroxyapatite (nHAp). Different techniques to characterize the nanocomposites were used. The cytotoxicity and genotoxic effects of the polymers and nanocomposites on human lymphocytes were determined by acid phosphatase assay, viability test, and comet assay. Moreover, hemocompatibility test was performed. It was found that all of the PMMA/nHAp nanocomposites are highly hemocompatible and biocompatible, none of the nanocomposites showed a cytotoxic effect, and nHAp addition decreased the genotoxicity.     

Dye‐affinity hollow‐fibres and their lysozyme adsorption–desorption characteristics

Dye‐affinity adsorption is increasingly used for protein separation. Hollow‐fibres have advantages as adsorbents in comparison to conventional bead supports because they are not compressible and can eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow‐fibres to which Reactive Green HE‐4BD was attached for adsorption of lysozyme. The hollow‐fibre was characterized by scanning electron microscopy. These dye‐carrying hollow‐fibres (26.3 µmol g^?1) were used in the lysozyme adsorption–elution studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached hollow‐fibres was studied in a batch system. The non‐specific adsorption of lysozyme on the polyamide hollow‐fibres was 1.8 mg g^?1. Reactive Green HE‐4BD attachment significantly increased the lysozyme adsorption up to 41.1 mg g^?1. Langmuir adsorption model was found to be applicable in interpreting lead adsorption by Reactive Green HE‐4BD attached hollow fibres. Significant amount of the adsorbed lysozyme (up to 95%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pH 8.0. In order to determine the effects of adsorption conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We concluded that polyamide dye‐affinity hollow‐fibres can be applied for lysozyme adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these dye‐attached hollow‐fibres are suitable for lysozyme adsorption. © 2001 Society of Chemical Industry     

Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

利用先进的纱疵分级系统分析纱线

当今因为经济原因,为相应的织物选择正确的纱至关重要,连续的进料检验才能保证产品达到稳定满意的质量,清纱和纱疵分级系统在这方面扮演着重要的角色.清纱曲线的设置在电清刚开始问世时是很困难的,需要专家来解决.