Studies on Properties of Rice Straw/Polymer Nanocomposites Based on Polycaprolactone and Fe3O4 Nanoparticles and Evaluation of Antibacterial Activity

Modified rice straw/Fe₃O₄/polycaprolactone nanocomposites (ORS/Fe₃O₄/PCL-NCs) have been prepared for the first time using a solution casting method. The RS/Fe₃O₄-NCs were modified with octadecylamine (ODA) as an organic modifier. The prepared NCs were characterized by using X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD results showed that as the intensity of the peaks decreased with the increase of ORS/Fe₃O₄-NCs content in comparison with PCL peaks, the Fe₃O₄-NPs peaks increased from 1.0 to 60.0 wt. %. The TEM and SEM results showed a good dispersion of ORS/Fe₃O₄-NCs in the PCL matrix and the spherical shape of the NPs. The TGA analysis indicated thermal stability of ORS/Fe₃O₄-NCs increased after incorporation with PCL but the thermal stability of ORS/Fe₃O₄/PCL-NCs decreased with the increase of ORS/Fe₃O₄-NCs content. Tensile strength was improved with the addition of 5.0 wt. % of ORS/Fe₃O₄-NCs. The antibacterial activities of the ORS/Fe₃O₄/PCL-NC films were examined against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using nutrient agar. The results indicated that ORS/Fe₃O₄/PCL-NC films possessed a strong antibacterial activity with the increase in the percentage of ORS/Fe₃O₄-NCs in the PCL.     

Degradability Enhancement of Poly(Lactic Acid) by Stearate-Zn(3)Al LDH Nanolayers

Recent environmental problems and societal concerns associated with the disposal of petroleum based plastics throughout the world have triggered renewed efforts to develop new biodegradable products compatible with our environment. This article describes the preparation, characterization and biodegradation study of poly(lactic acid)/layered double hydroxide (PLA/LDH) nanocomposites from PLA and stearate-Zn₃Al LDH. A solution casting method was used to prepare PLA/stearate-Zn₃Al LDH nanocomposites. The anionic clay Zn₃Al LDH was firstly prepared by co-precipitation method from a nitrate salt solution at pH 7.0 and then modified by stearate anions through an ion exchange reaction. This modification increased the basal spacing of the synthetic clay from 8.83 Å to 40.10 Å. The morphology and properties of the prepared PLA/stearate-Zn₃Al LDH nanocomposites were studied by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), thermogravimetric analysis (TGA), tensile tests as well as biodegradation studies. From the XRD analysis and TEM observation, the stearate-Zn₃Al LDH lost its ordered stacking-structure and was greatly exfoliated in the PLA matrix. Tensile test results of PLA/stearate-Zn₃Al LDH nanocomposites showed that the presence of around 1.0–3.0 wt % of the stearate-Zn₃Al LDH in the PLA drastically improved its elongation at break. The biodegradation studies demonstrated a significant biodegradation rate improvement of PLA in the presence of stearate-Zn₃Al LDH nanolayers. This effect can be caused by the catalytic role of the stearate groups in the biodegradation mechanism leading to much faster disintegration of nanocomposites than pure PLA.     

Reflection and transmission coefficient of yttrium iron garnet filled polyvinylidene fluoride composite using rectangular waveguide at microwave frequencies

The sol-gel method was carried out to synthesize nanosized Yttrium Iron Garnet (YIG). The nanomaterials with ferrite structure were heat-treated at different temperatures from 500 to 1000 °C. The phase identification, morphology and functional groups of the prepared samples were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR), respectively. The YIG ferrite nanopowder was composited with polyvinylidene fluoride (PVDF) by a solution casting method. The magnitudes of reflection and transmission coefficients of PVDF/YIG containing 6, 10 and 13% YIG, respectively, were measured using rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in X-band frequencies. The results indicate that the presence of YIG in polymer composites causes an increase in reflection coefficient and decrease in transmission coefficient of the polymer.     

Preparation and characterization of gelatin mediated silver nanoparticles by laser ablation

We successfully prepared colloidal silver nanoparticles (Ag-NPs) using a nanosecond pulsed Nd:YAG laser, λ = 532 nm, with laser fluence of approximately about 0.6 J/pulse, in an aqueous gelatin solution. The size and optical absorption properties of samples were studied as a function of the laser repetition rates. The results from the UV-vis spectroscopy demonstrated that the mean diameter of Ag-NPs increase with the laser repetition rate increases. The Ag-NPs have mean diameters ranging from approximately 9 nm to 15 nm. Compared with other preparation methods, this work is clean, rapid, and simple to use.     

Bilinear temperature gradient focusing in a hybrid PDMS/glass microfluidic chip integrated with planar heaters for generating temperature gradients

Temperature gradient focusing (TGF) is a counterflow gradient focusing technique, which utilizes a temperature gradient across a microchannel or capillary to separate analytes. With an appropriate buffer, the temperature gradient creates a gradient in both the electric field and electrophoretic velocity. Combined with a bulk counter flow, ionic species concentrate at a unique point where the total velocity sums to zero and separate from each other. Scanning TGF uses varying bulk flow so that a large number of analytes that have large differences in electrophoretic mobility can be sequentially focused and passed by a single detection point. Up to now, scanning TGF examples have been performed using a linear temperature gradient which has limitations in improving peak capacity and resolution at the same time. In this work, we develop a bilinear temperature gradient along the separation channel that improves both peak capacity and separation resolution simultaneously. The temperature profile along the channel consists of a very sharp gradient used to preconcentrate the sample followed by a shallow gradient that increases separation resolution. A specialized design is developed for the heaters to achieve the bilinear profile using both analytical and numerical modeling. The heaters are integrated onto a hybrid PDMS/glass chip fabricated using conventional sputtering and soft-lithography techniques. Separation performance is characterized by separating several different dyes and amino acids that have close electrophoretic mobilities. Experiments show a dramatic improvement in peak capacity and resolution in comparison to the standard linear temperature gradient.     

Experimental and Numerical Investigation of Mixed-Mode Interlaminar Fracture of Carbon-Polyester Laminated Woven Composite by Using Arcan Set-up

Composite materials are widely used in marine, aerospace and automobile industries. These materials are often subjected to defects and damages from both in-service and manufacturing process. Delamination is the most important of these defects. This paper reports investigation of mixed-mode fracture toughness in carbon–polyester composite by using numerical and experimental methods. All tests were performed by Arcan set-up. By changing the loading angle, α, from 0° to 90° at 15° intervals, mode-I, mixed-mode and mode-II fracture data were obtained. Correction factors for various conditions were obtained by using ABAQUS software. Effects of the crack length and the loading angle on fracture were also studied. The interaction j-integral method was used to separate the mixed–mode stress intensity factors at the crack tip under different loading conditions. As the result, it can be seen that the shearing mode interlaminar fracture toughness is larger than the opening mode interlaminar fracture toughness. This means that interlaminar cracked specimen is tougher in shear loading condition and weaker in tensile loading condition.     

Synthesis and characterization of polyethylene glycol mediated silver nanoparticles by the green method

The roles of green chemistry in nanotechnology and nanoscience fields are very significant in the synthesis of diverse nanomaterials. Herein, we report a green chemistry method for synthesized colloidal silver nanoparticles (Ag NPs) in polymeric media. The colloidal Ag NPs were synthesized in an aqueous solution using silver nitrate, polyethylene glycol (PEG), and β-D-glucose as a silver precursor, stabilizer, and reducing agent, respectively. The properties of synthesized colloidal Ag NPs were studied at different reaction times. The ultraviolet-visible spectra were in excellent agreement with the obtained nanostructure studies performed by transmission electron microscopy (TEM) and their size distributions. The Ag NPs were characterized by utilizing X-ray diffraction (XRD), zeta potential measurements and Fourier transform infrared (FT-IR). The use of green chemistry reagents, such as glucose, provides green and economic features to this work.     

Effect of accelerator in green synthesis of silver nanoparticles

Silver nanoparticles (Ag-NPs) were successfully synthesized in the natural polymeric matrix. Silver nitrate, gelatin, glucose, and sodium hydroxide have been used as silver precursor, stabilizer, reducing agent, and accelerator reagent, respectively. This study investigated the role of NaOH as the accelerator. The resultant products have been confirmed to be Ag-NPs using powder X-ray diffraction (PXRD), UV-vis spectroscopy, and transmission electron microscopy (TEM). The colloidal sols of Ag-NPs obtained at different volumes of NaOH show strong and different surface plasmon resonance (SPR) peaks, which can be explained from the TEM images of Ag-NPs and their particle size distribution. Compared with other synthetic methods, this work is green, rapid, and simple to use. The newly prepared Ag-NPs may have many potential applications in chemical and biological industries.     

Fabrication and Characterization of SiO2/(3-Aminopropyl)triethoxysilane-Coated Magnetite Nanoparticles for Lead(II) Removal from Aqueous Solution

A novel nano-adsorbent SiO₂/(3-aminopropyl)triethoxysilane-coated magnetite nanoparticles was synthesized for the adsorption of lead ions from water samples. Its structure and magnetic characteristics were characterized, by FTIR, powder X-ray diffraction, scanning electron microscope (SEM), transmission electron microscope (TEM) and vibrating sample magnetometry (VSM). Amino-functionalized SiO₂ coated Fe₃O₄ magnetite nano-adsorbent exhibited superparamagnetic behavior and strong magnetization at room temperature. The efficiency of the nano-adsorbent in separation of the metals was evaluated by adsorption technique. Kinetic data were analyzed using the pseudo-first-order and pseudo-second-order equations. The data fitted very well to the pseudo-second-order kinetic model.The linear Langmuir and Freundlich models were applied to describe equilibrium isotherms and Langmuir model fitted well. The monolayer adsorption capacity was found as 17.65 mg/g at pH 4.0. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were also calculated. These parameters showed that the adsorption of Pb(II) onto nano-adsorbent was feasible, spontaneous and endothermic. The amino-functionalized SiO₂ coated Fe₃O₄ magnetic nano-adsorbent shows high adsorption capability for metal ions from aqueous solutions via the chelation mechanisms. The Pb(II) loaded nano-adsorbent can be easily recovered from aqueous solution with magnetic separation and regenerated readily by acid treatment. The product of this work can be used as an effective and recyclable nano-adsorbent for the removal of metal ions in wastewater treatment.     

Rapid Adsorption of Heavy Metals by Fe3O4/Talc Nanocomposite and Optimization Study Using Response Surface Methodology

Fe₃O₄/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameters such as adsorbent dosage, removal time, and initial ion concentration were used as the independent variables and their effects on heavy metal ion removal were investigated. Analysis of variance was incorporated to judge the adequacy of the models. Optimal conditions with initial heavy metal ion concentration of 100, 92 and 270 mg/L, 120 s of removal time and 0.12 g of adsorbent amount resulted in 72.15%, 50.23%, and 91.35% removal efficiency for Cu(II), Ni(II), and Pb(II), respectively. The predictions of the model were in good agreement with experimental results and the Fe₃O₄/talc nanocomposite was successfully used to remove heavy metals from aqueous solutions.