Current scenario and potential of biodiesel production from waste cooking oil in Pakistan: An overview

Biodiesel utilization has been rapidly growing worldwide as the prime alternative to petrodiesel due to a global rise in diesel fuel demand along with hazardous emissions during its thermochemical conversion. Although, several debatable issues including feedstock availability and price, fuel and food competition, changes in land use and greenhouse gas emission have been raised by using edible as well as inedible feedstocks for the production of biodiesel. However, non-crop feedstocks could be a promising alternative. In this article, waste cooking oils have been recommended as a suitable option for biodiesel production bearing in mind the current national situation. The important factors such as the quantity of waste cooking oil produced, crude oil and vegetable oil import expenses, high-speed diesel imports, waste management issues and environmental hazards are considered. Moreover, process simulation and operating cost evaluation of an acid catalyzed biodiesel production unit are also conducted. The simulation results show that the production cost of waste cooking oil-based biodiesel is about 0.66USD·L^-1. We believe that the present overview would open new pathways and ideas for the development of biofuels from waste to energy approach in Pakistan.     

Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach

Reinforcement of PEEK by nanoparticles such as multiwalled carbon nanotubes (MWCNTs), is a promising technique to prepare PEEK nanocomposites with improved properties for promising biomedical applications. However, proper dispersion of MWCNTs in the polymer matrices is a primary processing challenge. The present study reports a novel and environmentally beneficial approach for homogeneous dispersion of MWCNT in PEEK by using ionic liquid (IL) 1-ethyl-3-methylimidazolium hydrogen sulfate ([EMIM][HSO₄]). Neat PEEK, PEEK-MWCNTs (using conventional organic solvent dimethylformamide), and PEEK-MWCNTs-IL (using [EMIM][HSO₄]) nanocomposites were fabricated via melt-compounding and compression molding techniques. The fabricated composites were characterized for morphological, thermal, and mechanical properties and compared to those of neat PEEK and PEEK-MWCNTs. Ionic liquid provoked proficient dispersion of the MWCNTs in PEEK, as confirmed by FESEM and optical micrographs. The thermal stability of PEEK-MWCNTs-IL composite was significantly superior to that of the neat PEEK and PEEK-MWCNTs. Analysis of tensile strength and nanoindentation depicted that the modulus of elasticity of PEEK-MWNCTs-IL was significantly increased by 76% as compared to that of neat PEEK. We believe that the present work could provide a new and green platform for the manufacturing of PEEK nanocomposites with enhanced dispersion of nanofillers for biomedical applications.     

Ferroelectric,dielectric, magnetic,structural and photocatalytic properties of Co and Fe doped LaCrO3 perovskite synthesized via micro-emulsion route

In the present investigation, La_1-xCo_xCr_1-yFe_yO₃ (x,y = 0.0, 0.12, 0.36, 0.60) perovskite was fabricated via a facile micro-emulsion route. The synthesized perovskites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) techniques to examine the effect of Co and Fe ions on the physico-chemical properties. The ferroelectric, dielectric, and magnetic properties of La_1-xCo_xCr_1-yFe_yO₃ were changed significantly as a function of dopants contents (Co and Fe ions). Outcomes revealed that the dielectric, ferroelectric and magnetic properties of LaCrO₃ perovskite can be tuned significantly via Co and Fe doping and La_0.40Co_0.60Cr_0.40Fe_0.60O₃ have potential for photocatalytic dye removal under (visible) light expoure. The photocatalytic activity (PCA) of the pristine LaCrO₃ and La_0.40Co_0.60Cr_0.40Fe_0.60O₃ photocatalyst was evaluated under (visible) light irradiation for crystal violet (CV) dye. Experimental results revealed that La_0.40Co_0.60Cr_0.40Fe_0.60O₃ photocatalyst degrdae almost 77.21% CV dye with the rate constant value of 0.01475 min^?1. In the presence of isopropyl alcohol (IPA) scavenger, the PCA of the La_0.40Co_0.60Cr_0.40Fe_0.60O₃ photocatalyst and rate constant value of the photocatalytic reaction decreased to 32.5% and 0.00491 min^?1, suggesting the superoxide as main active specie. Results revealed that Co and Fe doping doped material is efficient for photocatalytic presentations under solar light expoure.     

Micromechanical Investigation of the Fatigue Crack Propagation and Damage Development in Al/Al2O3/SiC Hybrid Metal Matrix Composite

Russian Journal of Non-Ferrous Metals - In this study, the micro-mechanisms involved in fatigue crack propagation are investigated qualitatively in a Al/Al2O3/SiC hybrid metal matrix composite...     

PtCo@NCNTs cathode catalyst using ZIF-67 for proton exchange membrane fuel cell

Zeolitic Imidazolate Frameworks (ZIF) is one of the potential candidates as highly conducting networks with large surface area with a possibility to be used as catalyst support for low temperature fuel cells. In the present study, highly active state-of-the-art PtCo@NCNTs (Nitrogen Doped Carbon Nanotube) catalyst was synthesized by pyrolyzing ZIF-67 along with Pt precursor under flowing ArH₂ atmosphere. The multi-walled NCNTs were densely grown on the surface of ZIF particles after pyrolysis. The high resolution TEM examination was employed to examine the nature of the PtCo particles as well as multi-walled NCNTs. Rotating disk electrode study was used for measuring oxygen reduction reaction performance for PtCo@NCNTs in 0.1 M HClO₄ and compared with commercial Pt/C catalyst. Fuel cell performance with PtCo@NCNT and commercial Pt/C catalysts was evaluated at 70 °C using Nafion-212 electrolyte using H₂ and O₂ gases (100% RH) and the observed peak power density of 630 and 560 mW cm^?2, respectively.     

Boosting the activity of FeOOH via integration of ZIF-12 and graphene to efficiently catalyze the oxygen evolution reaction

Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm^?2 and a low Tafel slope value of 78 mV dec^?1. The catalyst offers a maximum current density of 101 mA cm^?2, while it gives a turnover frequency (TOF) value of 0.031 s^?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support.     

Soret and Dufour effects between two rectangular plane walls with heat source/sink

This study addresses the thermo‐diffusion and the diffusion‐thermo phenomena in a semi‐infinite absorbent channel whose walls are contracting/expanding, with heat source/sink effects. The governing partial differential equations with suitable boundary conditions are transformed to a system of dimensionless ordinary differential equations. An analytic solution of the problem has been found using a technique called homotopy analysis method (HAM). HAM gives consistently valid answers to the problem over an extensive variety of parameters and also provides better accuracy. To validate the analytical results, a comparison has been presented with a numerical solution calculated by using the parallel shooting method. The effects of dimensionless parameters, that is, deformation parameter, Reynolds number, Soret and Dufour numbers, and heat source/sink parameter on the expressions of velocity, temperature, and concentration profiles are analyzed graphically to understand the physics of the deformable channel. It has been noted that the velocity across the channel is higher for the expanding channel, as compared to that for the contracting channel. Also the Soret and Dufour number increases the temperature of the fluid, and decreases the concentration. The temperature profile has an increasing behavior in the case of heat source, and a decreasing behavior in the case of heat sink.     

Investigation of charge transport mechanism in semiconducting La<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3</Subscript> manganite prepared by sol–gel method

Here in, we report the charge transport mechanism in semiconducting La_0.5Ca_0.5Mn_0.5Fe_0.5O₃ (LCMFO) polycrystalline material synthesized via sol–gel auto combustion route. X-ray diffraction (XRD) analysis confirmed the orthorhombic phase of the prepared material. Temperature dependent resistivity and impedance spectroscopy measurements have been carried out to probe the dielectric and electrical conduction mechanism which revealed a change of Mott variable range to the small polaronic hopping conduction mechanism around 303 K. The complex impedance and modulus spectra undoubtedly showed the contribution of both grain and grain boundary effect on the conduction properties of LCMFO. An equivalent circuit [(R_gbQ_gb) (R_gQ_g)] model has been used to address the electrical parameters associated with the different phases (grains and grain boundaries) having different relaxation times. The values of resistances of two phases obtained after fitting the equivalent circuit in the nyquist plot have been analyzed which confirmed the change of conduction mechanism around 303 K. The resultant change in conduction mechanism is also supported by the conductivity plots.     

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in-situ bulk polymerization

Electric power system applications demand for high-temperature dielectric materials. The improved performance of polymer nanocomposites requires improvement in their thermal conductivity & stability, dielectric stability and processing technique. However, they often lose their dielectric properties with a rise in temperature. Here, we offer a solution by incorporating electrically conducting material (MXene) and semiconducting inorganic nanoparticles (ZnO NPs) into an insulating PMMA polymer matrix to maintain high dielectric constant, both at the room and high temperature. Therefore, to achieve desirable thermal and dielectric properties is the main objective of the present study based on the homogeneous distribution of the nanofillers by in-situ bulk polymerization assisted by strong sonication in the corresponding polymer. The introduction of MXene and ZnO NPs into the PMMA not only acquires a substantial increment in the dielectric constant, to attain a value 437, with minimum energy loss of 0.36 at 25 Hz, but also improves the thermal conductivity of PMMA up to 14 times by causing the reduction of thermal resistance, which is actually responsible for the poor thermal conductivity of amorphous pure PMMA polymer. More importantly, hybrid PMMA/4:2 wt% MXene:ZnO nanocomposite leads to an excellent thermal stability. Moreover, further characterization of the synthesized nanocomposites by FTIR, SEM and XRD leads to the evaluation of strong interaction of ternary components with PMMA matrix.