Centrifugally spun carbon fibers prepared from aqueous poly(vinylpyrrolidone) solutions as binder-free anodes in lithium-ion batteries

Aqueous solutions of poly(vinylpyrrolidone) (PVP) of various concentrations (20, 25, and 28 wt%) were successfully spun into fibers by centrifugal spinning. The pristine PVP fibers were annealed and carbonized to produce flexible carbon fibers for use as binder-free anodes in lithium-ion batteries. These flexible carbon fibers were prepared by developing a novel three-step heat treatment to reduce the residual stresses in the pristine PVP precursor fibers, and to prevent fiber degradation during carbonization. The thermogravimetric analysis data showed that the annealed fibers yielded a residual mass percentage of 36.0% while the pristine PVP fibers suffered a higher mass loss and only retained 26.5% of original mass above 450 °C (under nitrogen). The electrochemical performance of the carbon-fiber anodes was evaluated by conducting galvanostatic charge/discharge, rate performance, and cycle voltammetry experiments. The 20, 25, and 28 wt% derived binder-free anodes delivered specific charge capacities of 205, 189, and 275 mAh g⁻¹, respectively, after the first cycle at a current density of 100 mA g⁻¹. The results obtained in this work indicate that a feasible pathway towards a large-scale production of carbon-fiber anodes from a 100% aqueous solution can be achieved via centrifugal spinning and subsequent heat treatment.     

Photo isomerization of cis-cyclooctene to trans-cyclooctene: Integration of a micro-flow reactor and separation by specific adsorption

Liquid-phase adsorption has hardly been established in micro-flow, although this constitutes an industrially vital method for product separation. A micro-flow UV-photo isomerization process converts cis-cyclooctene partly into trans-cyclooctene, leaving an isomeric mixture. Trans-cyclooctene adsorption and thus separation was achieved in a fixed-bed micro-flow reactor, packed with AgNO₃/SiO₂ powder, while the cis-isomer stays in the flow. The closed-loop recycling-flow has been presented as systemic approach to enrich the trans-cyclooctene from its cis-isomer. In-flow adsorption in recycling-mode has hardly been reported so that a full theoretical study has been conducted. This insight is used to evaluate three process design options to reach an optimum yield of trans-cyclooctene. These differ firstly in the variation of the individual residence times in the reactor and separator, the additional process option of refreshing the adsorption column under use, and the periodicity of the recycle flow.     

The Emerging Regulatory Role of Circular RNAs in Periodontal Tissues and Cells

Periodontitis is a chronic complex inflammatory disease associated with a destructive host immune response to microbial dysbiosis, leading to irreversible loss of tooth-supporting tissues. Regeneration of functional periodontal soft (periodontal ligament and gingiva) and hard tissue components (cementum and alveolar bone) to replace lost tissues is the ultimate goal of periodontal treatment, but clinically predictable treatments are lacking. Similarly, the identification of biomarkers that can be used to accurately diagnose periodontitis activity is lacking. A relatively novel category of molecules found in oral tissue, circular RNAs (circRNAs) are single-stranded endogenous, long, non-coding RNA molecules, with covalently circular-closed structures without a 5’ cap and a 3’ tail via non-classic backsplicing. Emerging research indicates that circRNAs are tissue and disease-specific expressed and have crucial regulatory functions in various diseases. CircRNAs can function as microRNA or RNA binding sites or can regulate mRNA. In this review, we explore the biogenesis and function of circRNAs in the context of the emerging role of circRNAs in periodontitis pathogenesis and the differentiation of periodontal cells. CircMAP3K11, circCDK8, circCDR1as, circ_0062491, and circ_0095812 are associated with pathological periodontitis tissues. Furthermore, circRNAs are expressed in periodontal cells in a cell-specific manner. They can function as microRNA sponges and can form circRNA–miRNA–mRNA networks during osteogenic differentiation for periodontal-tissue (or dental pulp)-derived progenitor cells.     

Cold plasma for the disinfection of industrial food-contact surfaces: An overview of current status and opportunities

Food safety is the primary goal for food and drink manufacturers. Cleaning and disinfection practices applied to the processing environment are vital to maintain this safety; yet, current approaches can incur costly downtime and the potential for microorganisms to grow and establish, if not effectively removed. For that reason, manufacturers are seeking nonthermal, online, and continuous disinfection processes to control the microbial levels within the processing environment. One such emerging technique, with great potential, is cold atmospheric pressure plasma (CAP). This review presents the latest advances and challenges associated with CAP-based technologies for the decontamination of surfaces and equipment found within the food-processing environment. It provides a detailed overview of the technology and a comprehensive analysis of the many CAP-based antimicrobial studies on food-contact surfaces and materials. As CAP is considered an emerging technique, many of the recent studies are still in the preliminary stages, with results obtained under widely different conditions. This lack of cohesive information and an inability to directly compare CAP systems has greatly impeded technological development. The review further explores the challenge of scaling CAP technology to meet industry needs, considering aspects such as regulatory constraints, environmental credentials, and cost of use. Finally, a discussion is presented on the future outlook for CAP technology in this area, identifying key challenges that must be addressed to promote industry uptake.     

Inorganic Electron Transport Materials in Perovskite Solar Cells

In the past decade, the perovskite solar cell (PSC) has attracted tremendous attention thanks to the substantial efforts in improving the power conversion efficiency from 3.8% to 25.5% for single-junction devices and even perovskite-silicon tandems have reached 29.15%. This is a result of improvement in composition, solvent, interface, and dimensionality engineering. Furthermore, the long-term stability of PSCs has also been significantly improved. Such rapid developments have made PSCs a competitive candidate for next-generation photovoltaics. The electron transport layer (ETL) is one of the most important functional layers in PSCs, due to its crucial role in contributing to the overall performance of devices. This review provides an up-to-date summary of the developments in inorganic electron transport materials (ETMs) for PSCs. The three most prevalent inorganic ETMs (TiO₂, SnO_2, and ZnO) are examined with a focus on the effects of synthesis and preparation methods, as well as an introduction to their application in tandem devices. The emerging trends in inorganic ETMs used for PSC research are also reviewed. Finally, strategies to optimize the performance of ETL in PSCs, effects the ETL has on J–V hysteresis phenomenon and long-term stability with an outlook on current challenges and further development are discussed.     

Adsorptive removal of methylene blue from aqueous solution on activated carbon prepared from Malawian baobab fruit shell wastes: Equilibrium,kinetics and thermodynamic studies

Baobab fruit shell (BFS), a renewable bio-waste from Malawian baobab tree was used as a precursor for the production of a low-cost activated carbon to remove methylene blue (MB) from aqueous solution. Parameters such as contact time, initial methylene blue concentration, adsorbent dose and temperature were studied. The adsorption process can be well described by both Langmuir isotherm and the pseudo-second-order kinetics. The maximum monolayer adsorption capacity of MB dye was ca. 334.45 mg/g. The negative value of the Gibb’s free energy and positive value of adsorption enthalpy showed the spontaneous nature and endothermic nature of the adsorption process, respectively.     

Biotransformation of hop derived compounds by Brettanomyces yeast strains

Several hop derived compounds in wort are known to be converted by yeast during fermentation, influencing the overall perception of the beer. A deeper understanding of such metabolic processes during fermentation is needed to achieve better control of the outcome. Here, the interaction between hop derived compounds and the yeast genera Brettanomyces was studied. Several Brettanomyces strains with different genomic backgrounds were selected, focusing on two traits: beta-glucosidase activity and nitrate assimilation. The role of three beta-glucosidases present in Brettanomyces bruxellensis and Brettanomyces anomalus and their impact on the final monoterpene alcohol profile was analysed. The beta-glucosidase activity was highly strain dependent, with B. anomalus CRL-49 exhibiting the highest conversion. Such activity could not be related to the release of aglycones from hops during fermentation, as a substantial part of such activity was intracellular. Nevertheless, the reduction of geraniol to β-citronellol was remarkably efficient for all Brettanomyces strains during fermentation, and it is suggested that two oxidoreductases BbHye2 and BbHye3 may have an influence. Moreover, the transfer of nitrate from hops to wort and its further assimilation by Brettanomyces species was analysed. The amount of nitrate in wort proved to be linearly proportional to the contact time of the hops with the wort. The level of nitrate assimilation by yeast was shown to be dependent on the nitrate assimilation cluster (YNR, YNI, YNT). Hence, the desired yeast strains may be selected according to the genetic make-up. © 2020 The Authors. Journal of the Institute of Brewing published by John Wiley & Sons Ltd on behalf of The Institute of Brewing & Distilling     

A yeast surface display platform for plant hormone receptors: Toward directed evolution of new biosensors

Small-molecule biosensors have major applications in biotechnology and medicine but remain difficult to engineer. Plant hormone receptors represent an attractive platform for engineering such biosensors because their chemically induced dimerization architectures naturally decouple small-molecule sensing and sensor actuation. Rapid biosensor engineering will require quantitative high-throughput screening methods. Here we develop a yeast surface display (YSD) platform for the PYR1/HAB1 abscisic acid sensor of Arabidopsis thaliana. We extensively optimized PYR1 surface display, HAB1 purification, and binding reaction conditions. Our system reproduces previous results with wild-type and engineered receptors, and a mathematical analysis of the PYR1/HAB1 system allows us to infer all binding constants. Critically, we find that a previously engineered PYR1 receptor with altered ligand specificity binds HAB1 with identical affinity, suggesting that substantial reengineering of the PYR1 binding pocket does not compromise sensor actuation. This YSD platform for A. thaliana PYR1/HAB1 will facilitate future biosensor engineering efforts.     

Fox Hunting in Wild Apples: Searching for Novel Genes in Malus Sieversii

Malus sieversii is considered the progenitor of modern apple (Malus pumila) cultivars and to represent a valuable source of genetic diversity. Despite the importance of M. sieversii as a source of disease resistance, stress tolerance, and novel fruit traits, little is known about gene function and diversity in M. sieversii. Notably, a publicly annotated genome sequence for this species is not available. In the current study, the FOX (Full-length cDNA OvereXpressing) gene hunting system was used to construct a library of transgenic lines of Arabidopsis in which each transgenic line overexpresses a full-length gene obtained from a cDNA library of the PI619283 accession of M. sieversii. The cDNA library was constructed from mRNA obtained from bark tissues collected in late fall–early winter, a time at which many abiotic stress-adaptative genes are expressed. Over 4000 apple FOX Arabidopsis lines have been established from the pool of transgenic seeds and cDNA inserts corresponding to various Gene Ontology (GO) categories have been identified. A total of 160 inserts appear to be novel, with no or limited homology to M. pumila, Arabidopsis, or poplar. Over 1300 lines have also been screened for freezing resistance. The constructed library of transgenic lines provides a valuable genetic resource for exploring gene function and diversity in Malus sieversii. Notably, no such library of t-DNA lines currently exists for any Malus species.