A survey on sexual awareness and behaviour of residents of a provincial city

For better understanding of the sexual behaviours that are high-risk in terms of HIV infection, a random sample of 200 people aged above 20 and below 60 years, from a population of 23,700, was selected in the provincial city of Nagano and surveyed by visitation. The responses of 156 people (a rate of response of 78%) were collected and the results were statistically analyzed. The methods employed in conducting a survey on sexual behaviour were also evaluated. The number of sexual partners is an indicator of high-risk sexual behaviour for HIV infection. The data reveals that 65.3% of the men and 37% of the women had two or more partners in the past, with 37.5% of the men and 12.5% of the women having two or more partners in the last 5 years, and 19.1% of the men and 4.2% of the women having two or more partners in the last year, revealing that a higher percentage of men than women have multiple partners. Comparison by age group reveals that young men and women in their 20s have the highest percentage of multiple partners. For both men and women first sexual intercourse before the age of 18, for men self-employment, being a craftsmen or in agriculture, and for women, higher education, were all factors in having greater numbers of partners. In conducting a survey on sexual behaviour the following should be kept in mind. 1) The psychological background of the respondent; Sex counseling skills are required on the part of the interviewer when taking a survey on sex since it is a very private and personal topic for people. Respondents have a tendency to be those who are open-minded about sex and are active in life, and these factors can exaggerate the survey results. 2) Conduct of a survey on sexual behaviour; The survey should be taken only after the purpose of the survey has been fully explained to the respondents and trust has been established. In principle, therefore, mailing of a letter of request and the actual questions should not be the method utilized prior to the collection of responses.     

Heat Generation in Multilayer Piezoelectric Actuators

Multilayer piezoelectric actuators when driven under high frequency, generate significant heat, which influences the reliability and other piezoelectric properties. In this paper, heat generation in various types of multilayer PZT-based actuators was studied. Experimental results showed that heat generation is mainly caused by ferroelectric hysteresis loss in the stress-free state. A simplified analytic method was established to evaluate the temperature rise, which is useful for the design of multilayer and other high-power actuators.     

Transverse colonic stenosis

A 3-year child presented with episodic lower abdominal pain; during the eighth attack, a mass was palpable in the left upper quadrant, and a barium enema revealed a stenotic area in the transverse colon. This was resected and an uneventful postoperative course followed. Subsequently, the child has remained symptom-free. instruments are no longer in use.     

Transiliac catheterization of the inferior vena cava for long-term venous access in children

In infants and children requiring prolonged, multiple central venous (CV) catheterizations, the superior (SVC) and inferior vena cava may become thrombosed or stenotic, making CV access a difficult problem. Use of the iliac vein may be an acceptable alternative. We report a patient with thrombosis of the SVC in whom the external iliac vein was accessed through a retroperitoneal approach for placement of an implantable port. This technique is easy to perform, and there are no special materials or patient positioning required.     

Structural Study on PbO–SiO2 Glasses by X-Ray and Neutron Diffraction and 29Si MAS NMR Measurements

Structure of x PbO–(100− x )SiO₂ ( x =25–89) glasses has been investigated by means of the X-ray and neutron diffraction and ²⁹Si MAS NMR measurements. In the radial distribution functions of all the glasses, the Pb–O correlation was observed at 0.23 nm, indicating that the PbO₃ trigonal pyramids units do exist in the whole glass forming composition range. Furthermore the existence of the first Pb–Pb correlation at ∼0.385 nm in the whole composition range suggests that the basic structural unit is considered to be a Pb₂O₄ unit, which consists of the edge-shared PbO₃ trigonal pyramids. These results strongly imply that the Pb₂O₄ units participate in the glass network constructed by SiO₄ tetrahedra even at low PbO content. Differing from other lead-containing glass systems, these structural characteristics of Pb ions in the PbO–SiO₂ glass system are responsible for the extremely wide glass-forming region.     

Effect of Additives on the Electromechanical Properties of Pb(Zr,Ti)O3–Pb(Y2/3W1/3)O3 Ceramics

Dielectric and piezoelectric properties of 0.02Pb(Y_2/3W_1/3)O₃ 0.98Pb(Zr0.52Ti0.48)O3 ceramics doped with additives (Nb₂O₅, La₂O₃, MnO₂, and Fe₂O₃) were investigated. The grain sizes of these ceramics decreased with increasing amounts of additives. For additions of MnO₂ and Fe₂O₃, dielectric losses decreased, while for Nb₂O₅ and La₂O₃, these values increased. The maximum values of the mechanical quality factor Q_m were found to be 956 and 975 for additions of 0.9 wt% Fe₂O₃ and 0.7 wt% MnO₂, respectively, but donor dopants (Nb₂O₅ and La₂O₃) did not change the values of Q_m . On the other hand, the piezoelectric constant d₃₃ and the electromechanical coupling factor k_p decreased with additions of MnO₂ and Fe₂O₃, but improved with additions of Nb₂O₅ and La₂O₃.     

Loss mechanisms and high power piezoelectrics

Heat generation is one of the significant problems in piezoelectrics for high power density applications. In this paper, we review the loss mechanisms in piezoelectrics first, followed by the heat generation processes for various drive conditions. Heat generation at off-resonance is caused mainly by dielectric loss tan δ′ (i.e., P-E hysteresis loss), not by mechanical loss, while the heat generation at resonance is mainly attributed to mechanical loss tan φ′. Then, practical high power materials developed at Penn State is introduced, which exhibit the vibration velocity more than 1 m/s, leading to the power density capability 10 times of the commercially available “hard” PZTs. We propose a internal bias field model to explain the low loss and high power origin of these materials. Finally, using a low temperature sinterable “hard” PZT, we demonstrated a high power multilayer piezoelectric transformers.     

Converter configurations and switching frequency for a GTO reactivepower compensator

This paper compares two converter configurations for a multi-10 MVA gate-turn-off (GTO) reactive power compensator (STATCOM) from the viewpoints of converter connection and switching frequency. One is a single-bridge system consisting of a three-phase bridge converter unit and a transformer. Its pulsewidth modulation (PWM) frequency varies from 450 to 1800 Hz, and its line frequency is 50 Hz. The other is a multiconnected converter system consisting of plural, single-, or three-phase converter units and transformers. Its switching frequencies are chosen to be the lowest possible. The evaluated items are harmonic distortion, power loss, GTO utilization factor, and control response. Our simulation study shows that the multiconnected converter system with the lowest switching frequency is superior to the single-bridge system with the higher switching frequency in every case, even when there are severe line faults requiring very quick response. A new control strategy is adopted for obtaining quick response     

Partial electrode method for loss and physical parameter determination of piezoceramics: Simplification,error investigation and applicability

The IEEE standard to determine physical parameters of piezoceramics has been utilized for decades by many researchers, yet it omits presence of important loss factors and possesses serious deficits that restrict accurate parameter determination. To resolve these issues, the partial electrode (PE) method was previously proposed, though the focus has been merely made on development of the method itself. In this study, we provide method simplification and more detailed analysis. The omission of unnecessary samples greatly boosts experiment and analysis process. To prove that the PE method is reliable, possible causes of errors were investigated; it is shown that they were either negligibly small or can be resolved with proper calibration. Furthermore, Applicability of PE method to various types of piezoceramic materials and compatibility with impedance analyzers are shown. Finally, PE method is proved to be reliable and can be alternative to IEEE Standard on Piezoelectricity.     

Novel method for driving the ultrasonic motor

This paper reports a novel driving method for an annular plate-type ultrasonic motor. Instead of the direct current/alternating current (DC/AC) converter type driver using a conventional electromagnetic transformer, a compact disc-type piezoelectric transformer is used to obtain a high voltage output for driving the ultrasonic motor. The piezoelectric transformer is operated in the radial vibration mode at resonance frequency close to the resonance frequency of the ultrasonic motor. Later, it was found that the piezoelectric transformer could drive the ultrasonic motor, even if their resonance frequencies are not exactly the same by incorporating a matching network in the circuit. The maximum speed of the ultrasonic motor obtained by using this driving method is over 300 rpm. It is believed that the results of this study will have impact on the integration and miniaturization of the ultrasonic motor and its driving circuit.